ON Semiconductor
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MC74LVXT4066DR2
Näytä Yksityiskohdat DataSheets

MC74LVXT4066DR2

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Analog Switch
  • Characteristics: Low-voltage, high-speed CMOS quad bilateral switch
  • Package: SOIC-14
  • Essence: Provides bidirectional switching capabilities for analog signals
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • On-state Resistance: 70Ω (typical) at VCC = 4.5V
  • On-state Resistance Flatness: 10Ω (typical) at VCC = 4.5V
  • On-state Resistance Match Between Channels: 3Ω (typical) at VCC = 4.5V
  • Break-Before-Make Delay Time: 20ns (typical) at VCC = 4.5V
  • Maximum Continuous Current: ±25mA
  • ESD Protection: >2000V HBM, >200V MM

Detailed Pin Configuration

The MC74LVXT4066DR2 has a total of 14 pins arranged as follows:

___________ | | 1 | 2 3 4 | 5 6 | 7 8 9 | 10 11 | 12 13 14 | |___________|

  1. IN1 - Input 1
  2. OUT1 - Output 1
  3. IN2 - Input 2
  4. OUT2 - Output 2
  5. GND - Ground
  6. IN3 - Input 3
  7. OUT3 - Output 3
  8. IN4 - Input 4
  9. OUT4 - Output 4
  10. VCC - Supply Voltage
  11. INH - Inhibit Control
  12. NC - No Connection
  13. NC - No Connection
  14. NC - No Connection

Functional Features

  • Low-voltage operation allows compatibility with a wide range of systems.
  • High-speed switching capability enables efficient signal routing.
  • Bidirectional switch functionality facilitates analog signal transmission in both directions.
  • Break-Before-Make delay time ensures smooth transition between channels.

Advantages and Disadvantages

Advantages: - Wide supply voltage range allows for versatile applications. - Low on-state resistance minimizes signal attenuation. - High ESD protection enhances device reliability.

Disadvantages: - Limited continuous current handling capacity. - Break-Before-Make delay may introduce slight signal distortion in certain applications.

Working Principles

The MC74LVXT4066DR2 is based on CMOS technology, which utilizes complementary pairs of MOSFETs to control the flow of analog signals. When an appropriate control signal is applied to the inhibit pin (INH), the internal switches connect or disconnect the corresponding input and output channels. The bidirectional nature of the switch allows for signal transmission in either direction.

Detailed Application Field Plans

The MC74LVXT4066DR2 finds application in various fields, including:

  1. Audio Systems: Enables audio signal routing and switching in mixers, amplifiers, and audio interfaces.
  2. Communication Systems: Facilitates signal routing in telecommunication equipment, such as modems and routers.
  3. Test and Measurement Instruments: Provides flexible signal routing capabilities in oscilloscopes, function generators, and data acquisition systems.
  4. Industrial Automation: Allows for analog signal switching in control systems, PLCs, and industrial sensors.
  5. Consumer Electronics: Used in devices like TVs, gaming consoles, and home appliances for signal routing and switching.

Detailed and Complete Alternative Models

  1. CD4066BCN: CMOS Quad Bilateral Switch
  2. DG406DJ: Analog Switch, Quad SPST, CMOS
  3. TS5A3160DBVR: Low-Voltage Single-Supply SPDT Analog Switch

These alternative models offer similar functionality and can be considered as substitutes for the MC74LVXT4066DR2 in various applications.

Word count: 445 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MC74LVXT4066DR2 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of MC74LVXT4066DR2 in technical solutions:

  1. Q: What is MC74LVXT4066DR2? A: MC74LVXT4066DR2 is a quad bilateral switch that can be used for analog or digital signal switching applications.

  2. Q: What is the voltage range supported by MC74LVXT4066DR2? A: MC74LVXT4066DR2 supports a wide voltage range from 2V to 5.5V.

  3. Q: Can MC74LVXT4066DR2 handle both analog and digital signals? A: Yes, MC74LVXT4066DR2 can handle both analog and digital signals effectively.

  4. Q: How many channels does MC74LVXT4066DR2 have? A: MC74LVXT4066DR2 has four independent channels, allowing for multiple signal paths.

  5. Q: What is the maximum current rating for each channel of MC74LVXT4066DR2? A: The maximum current rating for each channel of MC74LVXT4066DR2 is typically 25mA.

  6. Q: Can MC74LVXT4066DR2 be used for bidirectional signal switching? A: Yes, MC74LVXT4066DR2 supports bidirectional signal switching, making it suitable for various applications.

  7. Q: Is MC74LVXT4066DR2 compatible with TTL and CMOS logic levels? A: Yes, MC74LVXT4066DR2 is compatible with both TTL and CMOS logic levels, ensuring versatility in different systems.

  8. Q: What is the on-resistance of MC74LVXT4066DR2? A: The on-resistance of MC74LVXT4066DR2 is typically around 70 ohms.

  9. Q: Can MC74LVXT4066DR2 handle high-frequency signals? A: Yes, MC74LVXT4066DR2 has a wide bandwidth and can handle high-frequency signals up to several MHz.

  10. Q: What are some common applications of MC74LVXT4066DR2? A: MC74LVXT4066DR2 is commonly used in audio/video signal routing, analog/digital multiplexing, data acquisition systems, and general-purpose switching applications.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.