ON Semiconductor
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MC74VHC00DTG
Näytä Yksityiskohdat DataSheets

MC74VHC00DTG

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Logic Gate
  • Characteristics: High-speed, low-power consumption
  • Package: TSSOP-14
  • Essence: Quad 2-input NAND gate
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 2.0V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +125°C
  • Propagation Delay: 4.3 ns (typical) at 5V, 25°C
  • Maximum Quiescent Current: 1 µA at 5.5V, 25°C

Detailed Pin Configuration

The MC74VHC00DTG has a TSSOP-14 package with the following pin configuration:

__ __ A1 | 1 14 | VCC B1 | 2 13 | C1 A2 | 3 12 | D1 B2 | 4 11 | C2 Y1 | 5 10 | D2 GND | 6 9 | Y2 A3 | 7 8 | B3 --------

Functional Features

  • Quad 2-input NAND gate: The MC74VHC00DTG consists of four independent 2-input NAND gates in a single package.
  • High-speed operation: It provides fast switching times, making it suitable for applications requiring high-speed logic operations.
  • Low power consumption: The IC is designed to consume minimal power, making it energy-efficient.
  • Wide supply voltage range: It can operate within a wide range of supply voltages, from 2.0V to 5.5V.
  • High noise immunity: The IC has excellent noise immunity, ensuring reliable operation even in noisy environments.

Advantages and Disadvantages

Advantages: - Compact package with multiple gates in one IC - High-speed operation for time-critical applications - Low power consumption for energy efficiency - Wide supply voltage range for flexibility in different systems - High noise immunity for reliable performance

Disadvantages: - Limited number of gates per package (four in the case of MC74VHC00DTG) - Not suitable for applications requiring more than four NAND gates

Working Principles

The MC74VHC00DTG operates based on the principles of digital logic. Each of the four independent 2-input NAND gates takes two input signals and produces an output signal according to the NAND gate truth table. The gates use CMOS technology, which allows for high-speed operation and low power consumption.

Detailed Application Field Plans

The MC74VHC00DTG is commonly used in various digital logic applications, including but not limited to:

  1. Microcontrollers and microprocessors: It can be used as a building block for implementing complex logic functions in these devices.
  2. Communication systems: The IC can be utilized for signal processing, data encoding/decoding, and error detection/correction.
  3. Industrial automation: It finds applications in control systems, PLCs (Programmable Logic Controllers), and robotics.
  4. Automotive electronics: It can be employed in vehicle control units, dashboard displays, and safety systems.
  5. Consumer electronics: The IC is suitable for use in TVs, set-top boxes, gaming consoles, and home appliances.

Detailed and Complete Alternative Models

  1. SN74VHC00: This is a similar quad 2-input NAND gate IC offered by Texas Instruments. It has comparable specifications and pin configuration to the MC74VHC00DTG.
  2. CD4011B: This is a quad 2-input NAND gate IC from ON Semiconductor. It operates at a wider supply voltage range and has different packaging options.

These alternative models can be considered based on specific requirements, availability, and compatibility with existing systems.

Word count: 514 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MC74VHC00DTG :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of MC74VHC00DTG in technical solutions:

  1. Q: What is MC74VHC00DTG? A: MC74VHC00DTG is a quad 2-input NAND gate integrated circuit (IC) that operates on VHC (Very High-Speed CMOS) technology.

  2. Q: What are the typical applications of MC74VHC00DTG? A: MC74VHC00DTG is commonly used in digital logic circuits, such as in microcontrollers, computers, communication systems, and other electronic devices.

  3. Q: What is the operating voltage range for MC74VHC00DTG? A: The operating voltage range for MC74VHC00DTG is typically between 2.0V and 5.5V.

  4. Q: Can MC74VHC00DTG be used with both TTL and CMOS logic levels? A: Yes, MC74VHC00DTG is compatible with both TTL (Transistor-Transistor Logic) and CMOS (Complementary Metal-Oxide-Semiconductor) logic levels.

  5. Q: What is the maximum output current of MC74VHC00DTG? A: The maximum output current of MC74VHC00DTG is typically around 8mA.

  6. Q: Does MC74VHC00DTG have built-in protection against electrostatic discharge (ESD)? A: Yes, MC74VHC00DTG has built-in ESD protection to prevent damage from static electricity.

  7. Q: Can MC74VHC00DTG operate at high temperatures? A: MC74VHC00DTG has a wide temperature range and can operate reliably at temperatures up to 125°C.

  8. Q: What is the power supply current consumption of MC74VHC00DTG? A: The power supply current consumption of MC74VHC00DTG is typically very low, making it energy-efficient.

  9. Q: Can MC74VHC00DTG be used in battery-powered applications? A: Yes, MC74VHC00DTG's low power consumption makes it suitable for battery-powered applications where energy efficiency is crucial.

  10. Q: Is MC74VHC00DTG available in different package options? A: Yes, MC74VHC00DTG is available in various package options, including SOIC (Small Outline Integrated Circuit) and TSSOP (Thin Shrink Small Outline Package).

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and manufacturer guidelines.