ON Semiconductor
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MC74VHC50M
Näytä Yksityiskohdat DataSheets

MC74VHC50M

Product Overview

Category

MC74VHC50M belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used as a logic gate in digital electronic circuits.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with various logic families

Package

MC74VHC50M is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of MC74VHC50M lies in its ability to perform logical operations efficiently and reliably.

Packaging/Quantity

Typically, MC74VHC50M is packaged in reels or tubes, containing a specific quantity of ICs per package.

Specifications

  • Supply Voltage: 2.0V to 5.5V
  • Input Voltage: -0.5V to VCC + 0.5V
  • Output Voltage: -0.5V to VCC + 0.5V
  • Operating Temperature Range: -40°C to +85°C
  • Logic Family: VHC
  • Number of Inputs: 1
  • Number of Outputs: 1

Detailed Pin Configuration

MC74VHC50M consists of the following pins:

  1. A: Input pin
  2. Y: Output pin
  3. GND: Ground pin
  4. VCC: Power supply pin

Functional Features

  • Single input AND gate functionality
  • High-speed operation allows for quick signal processing
  • Low power consumption ensures energy efficiency
  • Wide operating voltage range provides flexibility in different applications
  • Compatibility with various logic families enables seamless integration into existing circuits

Advantages

  • Fast response time due to high-speed operation
  • Low power consumption leads to energy savings
  • Versatile compatibility with different logic families
  • Wide operating voltage range allows for diverse applications

Disadvantages

  • Limited number of inputs and outputs
  • May require additional components for complex logic operations

Working Principles

MC74VHC50M operates based on the principles of digital logic. It takes a single input signal and performs an AND operation, producing the corresponding output signal based on the logical conditions.

Detailed Application Field Plans

MC74VHC50M finds application in various fields, including:

  1. Digital electronics
  2. Microcontrollers
  3. Communication systems
  4. Industrial automation
  5. Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to MC74VHC50M include:

  1. SN74LVC1G08: Single 2-Input AND Gate
  2. CD4081B: Quad 2-Input AND Gate
  3. 74HC08: Quad 2-Input AND Gate
  4. CD4073B: Triple 3-Input AND Gate
  5. 74LS08: Quad 2-Input AND Gate

These alternative models offer similar functionality and can be used as substitutes depending on specific requirements.

In conclusion, MC74VHC50M is a high-speed logic gate IC that finds application in various digital electronic circuits. Its characteristics, functional features, advantages, and disadvantages make it a versatile component in the field of electronics.

Word count: 345

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MC74VHC50M :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of MC74VHC50M:

1. What is MC74VHC50M? MC74VHC50M is a high-speed CMOS logic gate, specifically a non-inverting buffer with 3-state outputs.

2. What is the operating voltage range for MC74VHC50M? The operating voltage range for MC74VHC50M is typically between 2.0V and 5.5V.

3. What is the maximum output current of MC74VHC50M? The maximum output current of MC74VHC50M is typically 8mA.

4. Can MC74VHC50M be used as a level shifter? Yes, MC74VHC50M can be used as a level shifter to convert signals from one voltage level to another.

5. What is the propagation delay of MC74VHC50M? The propagation delay of MC74VHC50M is typically around 6ns.

6. Can MC74VHC50M drive capacitive loads? Yes, MC74VHC50M can drive capacitive loads up to a certain limit. It is recommended to refer to the datasheet for specific details.

7. Is MC74VHC50M suitable for high-speed applications? Yes, MC74VHC50M is designed for high-speed applications due to its fast propagation delay and high-speed CMOS technology.

8. Can MC74VHC50M be used in automotive applications? Yes, MC74VHC50M is suitable for automotive applications as it can operate within the typical automotive voltage range.

9. Does MC74VHC50M have built-in protection features? MC74VHC50M does not have built-in protection features. It is recommended to use external protection components if required.

10. Can MC74VHC50M be used in battery-powered devices? Yes, MC74VHC50M can be used in battery-powered devices as it operates within a wide voltage range and has low power consumption.

Please note that these answers are general and may vary depending on the specific application and conditions. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.