ON Semiconductor
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MM74HC157MTCX
Näytä Yksityiskohdat DataSheets

MM74HC157MTCX

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Data Selector/Multiplexer
  • Characteristics: High-Speed, Quad 2-Input Multiplexer
  • Package: TSSOP-16
  • Essence: The MM74HC157MTCX is a multiplexer IC that allows the selection of one out of four data inputs and routes it to a single output.
  • Packaging/Quantity: The MM74HC157MTCX is available in tape and reel packaging with a quantity of 2500 units per reel.

Specifications

  • Supply Voltage: 2V to 6V
  • Logic Family: HC
  • Number of Inputs: 4
  • Number of Outputs: 1
  • Propagation Delay: 13 ns
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MM74HC157MTCX has a total of 16 pins arranged as follows:

__ __ A1 -| 1 16 |- Vcc B1 -| 2 15 |- Y A2 -| 3 14 |- B B2 -| 4 13 |- C A3 -| 5 12 |- D B3 -| 6 11 |- GND A4 -| 7 10 |- Strobe GND -| 8 9 |- Enable ----------

Functional Features

  • The MM74HC157MTCX is a high-speed quad 2-input multiplexer.
  • It features low power consumption and high noise immunity.
  • The device has separate active-low enable and strobe inputs for easy control.
  • It provides a wide operating voltage range, making it suitable for various applications.

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient data selection.
  • Low power consumption helps in reducing energy usage.
  • Separate enable and strobe inputs provide flexibility in control.
  • Wide operating voltage range enhances versatility.

Disadvantages

  • Limited to 4 input channels, which may not be sufficient for certain applications requiring more inputs.
  • The propagation delay of 13 ns may not be suitable for extremely time-sensitive applications.

Working Principles

The MM74HC157MTCX works based on the principle of multiplexing. It selects one out of four data inputs and routes it to the output based on the control signals provided through the enable and strobe inputs. When the enable input is high, the selected input is passed to the output. The strobe input is used to latch the selected input, ensuring stable output even when the enable input changes.

Detailed Application Field Plans

The MM74HC157MTCX can be used in various applications, including:

  1. Data routing and selection in digital systems.
  2. Address decoding in memory systems.
  3. Input selection in communication systems.
  4. Multiplexing control signals in microcontroller-based systems.
  5. Signal routing in test and measurement equipment.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the MM74HC157MTCX include:

  1. CD74HC157E by Texas Instruments
  2. SN74HC157N by Texas Instruments
  3. 74HC157D by NXP Semiconductors
  4. MC74HC157AN by ON Semiconductor

These alternatives can be considered based on specific requirements and availability.

Word count: 342 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MM74HC157MTCX :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of MM74HC157MTCX in technical solutions:

  1. Q: What is MM74HC157MTCX? A: MM74HC157MTCX is a quad 2-input multiplexer IC (integrated circuit) that can be used in various electronic applications.

  2. Q: What is the purpose of MM74HC157MTCX? A: The purpose of MM74HC157MTCX is to select one of four data inputs and route it to a single output based on the control inputs.

  3. Q: What voltage levels does MM74HC157MTCX support? A: MM74HC157MTCX supports voltage levels ranging from 2V to 6V.

  4. Q: How many control inputs does MM74HC157MTCX have? A: MM74HC157MTCX has two control inputs, typically labeled as "A" and "B".

  5. Q: Can MM74HC157MTCX be used for both digital and analog signals? A: Yes, MM74HC157MTCX can be used for both digital and analog signals, as long as they fall within the specified voltage range.

  6. Q: What is the maximum frequency at which MM74HC157MTCX can operate? A: MM74HC157MTCX can operate at a maximum frequency of around 50 MHz.

  7. Q: Can MM74HC157MTCX handle high-speed data transmission? A: Yes, MM74HC157MTCX is designed to handle high-speed data transmission, making it suitable for applications requiring fast switching.

  8. Q: Does MM74HC157MTCX have any built-in protection features? A: MM74HC157MTCX has built-in diode protection to prevent damage from electrostatic discharge (ESD).

  9. Q: Can MM74HC157MTCX be cascaded to increase the number of inputs? A: Yes, multiple MM74HC157MTCX ICs can be cascaded together to increase the number of inputs and outputs.

  10. Q: What are some common applications of MM74HC157MTCX? A: MM74HC157MTCX is commonly used in data multiplexing, signal routing, address decoding, and general-purpose switching applications.

Please note that these answers are general and may vary depending on specific use cases and requirements.