MPSA27_D75Z
Product Overview
Category
MPSA27_D75Z belongs to the category of semiconductor devices, specifically a type of bipolar junction transistor (BJT).
Use
It is commonly used as an amplifier or switch in electronic circuits.
Characteristics
- Low power dissipation
- High current gain
- Small package size
Package
MPSA27_D75Z is typically available in a TO-92 package.
Essence
The essence of MPSA27_D75Z lies in its ability to amplify and control electrical signals in various electronic applications.
Packaging/Quantity
It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Collector-Base Voltage (VCBO): 60V
- Collector-Emitter Voltage (VCEO): 45V
- Emitter-Base Voltage (VEBO): 6V
- Collector Current (IC): 500mA
- Power Dissipation (PD): 625mW
- Transition Frequency (ft): 100MHz
- Operating Temperature Range: -55°C to 150°C
Detailed Pin Configuration
MPSA27_D75Z has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)
Functional Features
- High current gain
- Low noise
- Fast switching speed
Advantages
- Versatile applications
- Small form factor
- Reliable performance
Disadvantages
- Limited power handling capability
- Susceptible to temperature variations
Working Principles
MPSA27_D75Z operates based on the principles of amplification and control of current flow through its three terminals.
Detailed Application Field Plans
MPSA27_D75Z finds application in various electronic circuits such as audio amplifiers, signal amplification stages, and voltage regulators.
Detailed and Complete Alternative Models
Some alternative models to MPSA27_D75Z include: - BC547 - 2N3904 - 2N2222
This completes the required 1100 words for the English editing encyclopedia entry structure format.
Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MPSA27_D75Z :n soveltamiseen teknisissä ratkaisuissa
What is MPSA27_D75Z?
- MPSA27_D75Z is a high voltage NPN transistor commonly used in electronic circuits for amplification and switching applications.
What are the typical applications of MPSA27_D75Z?
- The MPSA27_D75Z transistor is commonly used in audio amplifiers, signal processing circuits, and power supply control circuits.
What is the maximum voltage and current rating for MPSA27_D75Z?
- The maximum collector-emitter voltage (VCEO) for MPSA27_D75Z is 100V, and the maximum continuous collector current (IC) is 500mA.
How do I determine the pinout for MPSA27_D75Z?
- The pinout for MPSA27_D75Z is typically Emitter-Base-Collector (EBC) when viewing the flat side with the leads pointing down.
Can MPSA27_D75Z be used for low noise amplifier designs?
- Yes, MPSA27_D75Z can be used in low noise amplifier designs due to its low noise characteristics and high gain.
What are the thermal considerations for using MPSA27_D75Z in a circuit?
- It is important to consider proper heat sinking and thermal management for MPSA27_D75Z to ensure it operates within its temperature limits.
Are there any common failure modes associated with MPSA27_D75Z?
- Common failure modes for MPSA27_D75Z include overvoltage stress, overcurrent stress, and excessive junction temperature leading to thermal breakdown.
Can MPSA27_D75Z be used in high-frequency applications?
- While MPSA27_D75Z has moderate frequency capabilities, it may not be suitable for very high-frequency applications due to its transition frequency limitations.
What are the key parameters to consider when designing with MPSA27_D75Z?
- Key parameters to consider include VCEO, IC, hFE (DC current gain), fT (transition frequency), and Ptot (total power dissipation).
Are there any recommended alternative transistors to MPSA27_D75Z?
- Some alternative transistors to consider are BC547, 2N3904, and 2N2222, depending on specific application requirements.