ON Semiconductor
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
NCN6010DTBR2G
Näytä Yksityiskohdat DataSheets

NCN6010DTBR2G

Product Overview

  • Category: Integrated Circuit
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: DFN (Dual Flat No-Lead)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 1.2V to 3.6V
  • Output Current: Up to 600mA
  • Quiescent Current: 50µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The NCN6010DTBR2G has the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. VOUT: Output Voltage
  6. PG: Power Good Indicator

Functional Features

  • High efficiency power conversion
  • Low dropout voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Power good indicator for output voltage monitoring
  • Enable pin for easy on/off control

Advantages

  • Compact DFN package for space-constrained applications
  • Wide input voltage range allows for versatile use
  • Low quiescent current minimizes power consumption
  • Excellent load and line regulation for stable output voltage
  • Robust protection features ensure device reliability

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Requires external components for proper operation
  • Sensitive to input voltage fluctuations

Working Principles

The NCN6010DTBR2G is a voltage regulator that converts an input voltage within the specified range into a regulated output voltage. It utilizes a feedback mechanism to maintain the desired output voltage, compensating for load variations and input voltage changes. The enable pin allows for easy control of the device's operation.

Detailed Application Field Plans

The NCN6010DTBR2G is commonly used in various applications, including:

  1. Battery-powered devices
  2. Portable electronics
  3. IoT (Internet of Things) devices
  4. Wearable devices
  5. Embedded systems

Detailed and Complete Alternative Models

  • LM1117: Low dropout voltage regulator
  • LT1763: High-performance linear regulator
  • TPS62130: Step-down converter with integrated switch
  • ADP2303: Synchronous step-down DC-DC converter

These alternative models offer similar functionality and can be considered as substitutes for the NCN6010DTBR2G depending on specific requirements.

Word count: 301 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät NCN6010DTBR2G :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of NCN6010DTBR2G in technical solutions:

  1. Q: What is the NCN6010DTBR2G? A: The NCN6010DTBR2G is a dual-channel high-speed CAN transceiver designed for automotive and industrial applications.

  2. Q: What is the maximum data rate supported by the NCN6010DTBR2G? A: The NCN6010DTBR2G supports a maximum data rate of 5 Mbps.

  3. Q: Can the NCN6010DTBR2G be used in both automotive and industrial applications? A: Yes, the NCN6010DTBR2G is suitable for both automotive and industrial applications.

  4. Q: What is the operating voltage range of the NCN6010DTBR2G? A: The NCN6010DTBR2G operates within a voltage range of 4.5V to 5.5V.

  5. Q: Does the NCN6010DTBR2G support bus fault protection? A: Yes, the NCN6010DTBR2G features built-in bus fault protection.

  6. Q: Can the NCN6010DTBR2G be used in harsh environments? A: Yes, the NCN6010DTBR2G is designed to operate reliably in harsh environments with its robust EMC performance.

  7. Q: Is the NCN6010DTBR2G compatible with other CAN transceivers? A: Yes, the NCN6010DTBR2G is fully compatible with other CAN transceivers that comply with the ISO 11898 standard.

  8. Q: What is the power consumption of the NCN6010DTBR2G? A: The NCN6010DTBR2G has low power consumption, typically drawing around 5mA in normal operation.

  9. Q: Does the NCN6010DTBR2G support wake-up functionality? A: Yes, the NCN6010DTBR2G supports wake-up functionality, allowing it to be activated from a low-power sleep mode.

  10. Q: Can the NCN6010DTBR2G be used in safety-critical applications? A: Yes, the NCN6010DTBR2G is designed to meet the requirements of safety-critical applications and complies with relevant industry standards.

Please note that these answers are general and may vary depending on the specific application and requirements.