ON Semiconductor
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
NCP1071STAT3G
Näytä Yksityiskohdat DataSheets

NCP1071STAT3G

Product Overview

Category

NCP1071STAT3G belongs to the category of integrated circuits (ICs) specifically designed for power management applications.

Use

This product is primarily used in various power supply systems, including but not limited to AC-DC converters, LED drivers, and battery chargers.

Characteristics

  • High efficiency: The NCP1071STAT3G offers excellent power conversion efficiency, resulting in reduced energy consumption and improved overall system performance.
  • Wide input voltage range: It can operate with input voltages ranging from 85V to 265V, making it suitable for a wide range of applications.
  • Low standby power consumption: The device features a low standby power mode, ensuring minimal power loss during idle periods.
  • Overvoltage and overcurrent protection: The NCP1071STAT3G incorporates built-in protection mechanisms to safeguard against voltage spikes and excessive current flow, enhancing system reliability.

Package

The NCP1071STAT3G is available in a small outline transistor (SOT-223) package, which provides thermal efficiency and ease of integration into various circuit designs.

Essence

The essence of NCP1071STAT3G lies in its ability to efficiently regulate and convert electrical power, enabling reliable operation of electronic devices across different power supply systems.

Packaging/Quantity

This product is typically packaged in reels containing 2,500 units per reel.

Specifications

  • Input Voltage Range: 85V - 265V AC
  • Output Voltage Range: Adjustable, depending on application requirements
  • Maximum Output Current: Up to 1.5A
  • Operating Temperature Range: -40°C to +125°C
  • Switching Frequency: Adjustable, up to 100kHz

Detailed Pin Configuration

The NCP1071STAT3G features a standard 7-pin configuration:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for output voltage regulation
  4. COMP: Compensation pin for stability control
  5. CS: Current sense pin for current limit protection
  6. DRAIN: Switching transistor drain connection
  7. SOURCE: Switching transistor source connection

Functional Features

  • Constant voltage (CV) and constant current (CC) modes for precise power regulation.
  • Soft-start functionality to prevent excessive inrush current during startup.
  • Frequency jittering to minimize electromagnetic interference (EMI).
  • Overtemperature protection to prevent damage due to excessive heat.
  • Cycle-by-cycle current limiting for enhanced system safety.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced energy consumption and lower operating costs.
  • Wide input voltage range allows for versatile application across different power systems.
  • Compact SOT-223 package enables space-efficient circuit designs.
  • Built-in protection mechanisms enhance system reliability and longevity.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Requires careful consideration of thermal management due to the small package size.

Working Principles

The NCP1071STAT3G operates on a pulse width modulation (PWM) principle, where it regulates the output voltage by adjusting the duty cycle of the switching transistor. By continuously monitoring the feedback voltage, the device adjusts the duty cycle to maintain a stable output voltage despite variations in input voltage or load conditions.

Detailed Application Field Plans

The NCP1071STAT3G finds extensive use in various power management applications, including: - AC-DC converters for consumer electronics, industrial equipment, and lighting systems. - LED drivers for efficient and reliable illumination in residential, commercial, and automotive lighting. - Battery chargers for portable devices, electric vehicles, and renewable energy systems.

Detailed and Complete Alternative Models

  • NCP1071STAT3G is part of the NCP107x family, which includes other variants such as NCP1070, NCP1072, and NCP1075. These models offer similar functionality with slight variations in specifications to cater to different application requirements.

In conclusion, the NCP1071STAT3G is a highly efficient integrated circuit designed for power management applications. Its wide input voltage range, compact package, and built-in protection mechanisms make it suitable for various power supply systems. With its precise regulation capabilities and versatile applications, the NCP1071STAT3G contributes to energy-efficient and reliable electronic devices across multiple industries.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät NCP1071STAT3G :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of NCP1071STAT3G in technical solutions:

  1. Q: What is NCP1071STAT3G? A: NCP1071STAT3G is a high-performance integrated circuit (IC) designed for power supply applications.

  2. Q: What are the key features of NCP1071STAT3G? A: Some key features include high efficiency, low standby power consumption, built-in protection mechanisms, and wide input voltage range.

  3. Q: What are the typical applications of NCP1071STAT3G? A: NCP1071STAT3G is commonly used in various power supply applications such as AC-DC adapters, LED lighting, industrial power supplies, and consumer electronics.

  4. Q: How does NCP1071STAT3G achieve high efficiency? A: NCP1071STAT3G utilizes advanced control techniques like frequency jittering and valley switching to optimize power conversion efficiency.

  5. Q: Can NCP1071STAT3G operate with a wide input voltage range? A: Yes, NCP1071STAT3G can operate with a wide input voltage range typically from 85V to 265V AC.

  6. Q: Does NCP1071STAT3G have built-in protection features? A: Yes, NCP1071STAT3G incorporates various protection mechanisms such as overvoltage protection, overcurrent protection, and thermal shutdown.

  7. Q: Is NCP1071STAT3G suitable for low standby power applications? A: Yes, NCP1071STAT3G has a low standby power consumption mode that helps reduce power wastage during idle or standby periods.

  8. Q: Can NCP1071STAT3G be used in dimmable LED lighting applications? A: Yes, NCP1071STAT3G supports dimming functionality and can be used in dimmable LED lighting solutions.

  9. Q: What is the typical efficiency of NCP1071STAT3G? A: The typical efficiency of NCP1071STAT3G is around 90% or higher, depending on the specific application and operating conditions.

  10. Q: Are there any reference designs available for NCP1071STAT3G? A: Yes, ON Semiconductor provides reference designs and application notes to assist engineers in implementing NCP1071STAT3G in their technical solutions.

Please note that these answers are general and may vary based on specific product documentation and application requirements.