ON Semiconductor
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
NCP1338DR2G
Näytä Yksityiskohdat DataSheets

NCP1338DR2G

Overview

Category: Integrated Circuit (IC)

Use: Power Management

Characteristics: - High efficiency - Low standby power consumption - Wide input voltage range - Protection features (overvoltage, overcurrent, and thermal shutdown) - Compact package size

Package: SOIC-8

Essence: The NCP1338DR2G is a highly efficient integrated circuit used for power management applications. It offers various protection features and operates with a wide input voltage range. The compact SOIC-8 package makes it suitable for space-constrained designs.

Packaging/Quantity: The NCP1338DR2G is typically sold in reels containing 2500 units.

Specifications

The NCP1338DR2G has the following specifications:

  • Input Voltage Range: 85V to 265V AC
  • Output Voltage Range: 5V to 24V DC
  • Maximum Output Current: 1A
  • Standby Power Consumption: Less than 100mW
  • Efficiency: Up to 90%
  • Operating Temperature Range: -40°C to 125°C

Pin Configuration

The NCP1338DR2G has an 8-pin Small Outline Integrated Circuit (SOIC) package. The pin configuration is as follows:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for output voltage regulation
  4. COMP: Compensation pin for stability control
  5. CS: Current sense pin for current limit control
  6. SS: Soft-start pin for gradual startup
  7. DRAIN: Switching transistor drain pin
  8. VCCSENSE: Voltage sensing pin for overvoltage protection

Functional Features

The NCP1338DR2G offers the following functional features:

  1. High Efficiency: The integrated circuit is designed to achieve high efficiency, reducing power losses and maximizing energy conversion.
  2. Low Standby Power Consumption: The NCP1338DR2G minimizes standby power consumption, contributing to energy savings in idle or low-load conditions.
  3. Wide Input Voltage Range: It can operate with a wide input voltage range, allowing flexibility in various power supply applications.
  4. Protection Features: The IC incorporates protection mechanisms such as overvoltage, overcurrent, and thermal shutdown, ensuring safe operation and preventing damage to connected devices.

Advantages and Disadvantages

Advantages: - High efficiency leads to energy savings - Wide input voltage range allows for versatile applications - Compact package size enables space-constrained designs - Protection features enhance system reliability

Disadvantages: - Limited maximum output current (1A) - May require additional external components for specific applications

Working Principles

The NCP1338DR2G operates based on a pulse frequency modulation (PFM) control scheme. It utilizes feedback from the FB pin to regulate the output voltage. By adjusting the switching frequency of the internal power switch, it maintains the desired output voltage while optimizing efficiency. The CS pin monitors the current flowing through the power switch, enabling current limit control and protection.

Application Field Plans

The NCP1338DR2G is suitable for various power management applications, including but not limited to: - AC-DC power supplies - LED lighting systems - Consumer electronics - Industrial equipment - Telecommunications devices

Alternative Models

For power management applications, alternative models to the NCP1338DR2G include:

  1. TNY274PN: Similar functionality with enhanced protection features
  2. FAN7602B: Higher maximum output current capability
  3. UC3843: More advanced control features with higher complexity

These alternative models offer different specifications and features, allowing designers to choose the most suitable option based on their specific requirements.

In conclusion, the NCP1338DR2G is a highly efficient integrated circuit used for power management applications. Its compact size, wide input voltage range, and protection features make it a versatile choice for various industries. Designers can consider alternative models based on specific needs and preferences.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät NCP1338DR2G :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of NCP1338DR2G in technical solutions:

  1. Q: What is NCP1338DR2G? A: NCP1338DR2G is a high-performance current mode controller IC used in power supply applications.

  2. Q: What are the key features of NCP1338DR2G? A: Some key features include wide input voltage range, adjustable switching frequency, built-in protection features, and low standby power consumption.

  3. Q: What is the typical application of NCP1338DR2G? A: NCP1338DR2G is commonly used in offline flyback converters for various applications such as LED lighting, consumer electronics, and industrial equipment.

  4. Q: How does NCP1338DR2G help in power supply designs? A: NCP1338DR2G provides precise control over the power supply output, ensuring stable and efficient operation while offering protection against faults and abnormal conditions.

  5. Q: Can NCP1338DR2G handle high input voltages? A: Yes, NCP1338DR2G can handle a wide input voltage range, typically up to several hundred volts, making it suitable for universal input power supplies.

  6. Q: Is NCP1338DR2G capable of adjustable switching frequency? A: Yes, NCP1338DR2G allows users to adjust the switching frequency according to their specific requirements, providing flexibility in power supply design.

  7. Q: What protection features are available in NCP1338DR2G? A: NCP1338DR2G offers various protection features like overvoltage protection (OVP), overcurrent protection (OCP), and thermal shutdown to safeguard the power supply and connected devices.

  8. Q: Can NCP1338DR2G operate in standby mode? A: Yes, NCP1338DR2G has a low standby power consumption mode, making it suitable for applications that require energy-efficient operation during standby or idle periods.

  9. Q: Is NCP1338DR2G compatible with LED lighting applications? A: Yes, NCP1338DR2G is commonly used in LED lighting applications due to its ability to provide stable and efficient power supply to LED drivers.

  10. Q: Are there any application notes or reference designs available for NCP1338DR2G? A: Yes, the manufacturer of NCP1338DR2G typically provides application notes and reference designs that can help users in implementing the IC effectively in their technical solutions.

Please note that the answers provided here are general and may vary depending on specific requirements and design considerations. It is always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.