ON Semiconductor
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
SMMBT2907ALT1G
Näytä Yksityiskohdat DataSheets

SMMBT2907ALT1G

Product Overview

The SMMBT2907ALT1G belongs to the category of bipolar transistors and is commonly used in electronic circuits for amplification, switching, and regulation. This transistor is characterized by its high voltage capability, low saturation voltage, and compact package size. It is typically available in a small SOT-23 package and is sold in quantities suitable for both hobbyist and professional use.

Specifications

  • Maximum Collector-Base Voltage: 60V
  • Maximum Collector Current: 600mA
  • Power Dissipation: 225mW
  • Transition Frequency: 250MHz
  • Package Type: SOT-23

Detailed Pin Configuration

The SMMBT2907ALT1G transistor has three pins: 1. Base (B) 2. Emitter (E) 3. Collector (C)

Functional Features

  • High voltage capability
  • Low saturation voltage
  • Fast switching speed
  • Small package size

Advantages and Disadvantages

Advantages

  • High voltage capability allows for versatile applications
  • Low saturation voltage minimizes power loss
  • Fast switching speed enables efficient operation in various circuits

Disadvantages

  • Limited maximum collector current compared to some other transistors
  • Sensitive to overvoltage conditions

Working Principles

The SMMBT2907ALT1G operates based on the principles of bipolar junction transistors, where the flow of current between the collector and emitter is controlled by the current at the base terminal. By modulating the base current, the transistor can amplify signals or act as a switch in electronic circuits.

Detailed Application Field Plans

The SMMBT2907ALT1G is commonly used in the following applications: - Amplifiers - Switching circuits - Voltage regulators - Oscillators

Detailed and Complete Alternative Models

Some alternative models to the SMMBT2907ALT1G include: - 2N3904 - BC547 - 2N2222

In conclusion, the SMMBT2907ALT1G is a versatile bipolar transistor with high voltage capability and fast switching speed, making it suitable for a wide range of electronic applications.

[Word count: 298]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät SMMBT2907ALT1G :n soveltamiseen teknisissä ratkaisuissa

  1. What is the SMMBT2907ALT1G used for?

    • The SMMBT2907ALT1G is a PNP bipolar transistor commonly used for amplification and switching applications in technical solutions.

  2. What are the key features of the SMMBT2907ALT1G?

    • The SMMBT2907ALT1G features a high current gain, low saturation voltage, and low leakage current, making it suitable for various technical solutions.

  3. What are the typical applications of the SMMBT2907ALT1G?

    • Typical applications include audio amplification, signal processing, power management, and general switching circuits in technical solutions.

  4. What is the maximum collector current of the SMMBT2907ALT1G?

    • The maximum collector current (Ic) of the SMMBT2907ALT1G is typically around 600mA, making it suitable for low to medium power applications.

  5. What is the voltage rating of the SMMBT2907ALT1G?

    • The SMMBT2907ALT1G has a maximum collector-emitter voltage (Vce) of around 60V, which allows it to be used in various voltage levels in technical solutions.

  6. Is the SMMBT2907ALT1G suitable for high-frequency applications?

    • While the SMMBT2907ALT1G can operate at moderate frequencies, it is not specifically designed for high-frequency applications and may not be optimal for such use cases.

  7. Does the SMMBT2907ALT1G require external biasing components?

    • Yes, the SMMBT2907ALT1G typically requires external biasing resistors to set the operating point and ensure proper transistor operation in technical solutions.

  8. Can the SMMBT2907ALT1G be used in temperature-sensitive environments?

    • The SMMBT2907ALT1G has a wide operating temperature range and can be used in temperature-sensitive environments within its specified limits.

  9. Are there any common failure modes associated with the SMMBT2907ALT1G?

    • Common failure modes include thermal runaway under high current conditions and breakdown due to exceeding the maximum voltage ratings.

  10. Where can I find detailed specifications and application notes for the SMMBT2907ALT1G?

    • Detailed specifications and application notes for the SMMBT2907ALT1G can be found in the datasheet provided by the manufacturer or distributor.