Power Integrations
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
TOP243GN-TL
Näytä Yksityiskohdat DataSheets

TOP243GN-TL

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, low standby power, compact size
  • Package: TO-220-7L
  • Essence: Switching Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 85VAC to 265VAC
  • Output Power: Up to 45W
  • Frequency Range: 50Hz to 400Hz
  • Efficiency: Up to 88%
  • Standby Power: Less than 100mW
  • Operating Temperature Range: -40°C to +150°C

Detailed Pin Configuration

  1. VCC: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for voltage regulation
  4. COMP: Compensation pin for stability control
  5. DRAIN: Switching transistor drain connection
  6. SOURCE: Switching transistor source connection
  7. CONTROL: Control pin for ON/OFF and frequency adjustment

Functional Features

  • Integrated high-voltage power MOSFET
  • Built-in frequency jittering for reduced EMI
  • Auto-restart protection against output faults
  • Cycle-by-cycle current limit protection
  • Over-temperature protection
  • Under-voltage lockout with hysteresis

Advantages and Disadvantages

Advantages: - High efficiency leads to energy savings - Low standby power reduces power consumption in idle mode - Compact size allows for space-saving designs

Disadvantages: - Limited output power compared to higher-rated devices - Requires external components for complete power supply design

Working Principles

The TOP243GN-TL is a switching regulator IC that converts high-voltage AC input into regulated DC output. It utilizes a high-voltage power MOSFET to switch the input voltage at high frequency, achieving efficient power conversion. The feedback pin (FB) monitors the output voltage and adjusts the duty cycle of the switching transistor to maintain a stable output. The control pin (CONTROL) provides ON/OFF and frequency adjustment capabilities.

Detailed Application Field Plans

The TOP243GN-TL is commonly used in various applications, including:

  1. Power Adapters: It can be employed in AC-DC power adapters for consumer electronics, such as laptops, smartphones, and gaming consoles.
  2. LED Lighting: The IC is suitable for driving LED lighting systems, providing efficient and dimmable illumination.
  3. Industrial Equipment: It finds application in industrial equipment, such as motor drives, robotics, and automation systems, due to its compact size and high efficiency.
  4. Home Appliances: The IC can be utilized in home appliances like refrigerators, air conditioners, and washing machines to enhance energy efficiency.

Detailed and Complete Alternative Models

  1. TOP244GN-TL: Similar specifications and features, but with a lower output power rating.
  2. TOP245GN-TL: Similar specifications and features, but with a higher output power rating.
  3. TOP246GN-TL: Similar specifications and features, but with additional protection features.

(Note: This list is not exhaustive and other alternative models may exist.)

Word Count: 346 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät TOP243GN-TL :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of TOP243GN-TL in technical solutions:

  1. Q: What is TOP243GN-TL? A: TOP243GN-TL is a highly integrated offline switcher IC (integrated circuit) designed for low power applications.

  2. Q: What are the typical applications of TOP243GN-TL? A: TOP243GN-TL is commonly used in applications such as auxiliary power supplies, battery chargers, LED lighting, and industrial controls.

  3. Q: What is the input voltage range supported by TOP243GN-TL? A: The input voltage range of TOP243GN-TL is typically between 85VAC and 265VAC.

  4. Q: What is the maximum output power that can be achieved with TOP243GN-TL? A: The maximum output power depends on the specific design and operating conditions, but it can typically reach up to 30 watts.

  5. Q: Does TOP243GN-TL require an external MOSFET? A: No, TOP243GN-TL integrates a high-voltage power MOSFET, eliminating the need for an external one.

  6. Q: Can TOP243GN-TL operate in continuous or discontinuous mode? A: TOP243GN-TL can operate in both continuous and discontinuous modes, depending on the load and operating conditions.

  7. Q: Is TOP243GN-TL suitable for flyback converter designs? A: Yes, TOP243GN-TL is specifically designed for flyback converter applications and provides excellent performance in such designs.

  8. Q: What are the key protection features offered by TOP243GN-TL? A: TOP243GN-TL includes various protection features like thermal shutdown, overload protection, and output short-circuit protection.

  9. Q: Can TOP243GN-TL be used in high-temperature environments? A: Yes, TOP243GN-TL is designed to operate reliably in a wide temperature range, typically up to 150°C.

  10. Q: Are there any evaluation boards or reference designs available for TOP243GN-TL? A: Yes, Power Integrations, the manufacturer of TOP243GN-TL, provides evaluation boards and reference designs that can help with the implementation of this IC in various applications.

Please note that these answers are general and may vary depending on the specific requirements and conditions of your technical solution.