Richtek USA Inc.
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
RT9030-18GU5
Näytä Yksityiskohdat DataSheets

RT9030-18GU5

Product Overview

Category

RT9030-18GU5 belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: The RT9030-18GU5 comes in a compact SOT-23 package.
  • Essence: This voltage regulator is designed to provide a stable output voltage.
  • Packaging/Quantity: It is typically sold in reels, with each reel containing a specific quantity of units.

Specifications

The specifications of the RT9030-18GU5 are as follows:

  • Input Voltage Range: 2.5V - 6V
  • Output Voltage: 1.8V
  • Maximum Output Current: 300mA
  • Dropout Voltage: 200mV
  • Quiescent Current: 45µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The RT9030-18GU5 has three pins:

  1. VIN (Input Voltage): This pin is used to connect the input voltage source.
  2. GND (Ground): This pin is connected to the ground reference of the circuit.
  3. VOUT (Output Voltage): The regulated output voltage is obtained from this pin.

Functional Features

  • Low Dropout Voltage: The RT9030-18GU5 exhibits a low dropout voltage, ensuring efficient regulation even when the input voltage is close to the desired output voltage.
  • Low Quiescent Current: With a quiescent current of only 45µA, this voltage regulator minimizes power consumption during standby or idle periods.
  • Overcurrent Protection: The device incorporates overcurrent protection, safeguarding the circuit against excessive current flow.

Advantages and Disadvantages

Advantages

  • Compact Size: The SOT-23 package makes it suitable for space-constrained applications.
  • Low Quiescent Current: The low quiescent current ensures minimal power consumption.
  • Overcurrent Protection: The built-in overcurrent protection enhances the reliability of the circuit.

Disadvantages

  • Limited Output Current: The maximum output current of 300mA may not be sufficient for high-power applications.
  • Narrow Input Voltage Range: The input voltage range of 2.5V - 6V may limit its compatibility with certain circuits.

Working Principles

The RT9030-18GU5 operates based on a linear voltage regulation principle. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This allows it to maintain a stable output voltage despite variations in the input voltage.

Detailed Application Field Plans

The RT9030-18GU5 is commonly used in various electronic devices and circuits, including but not limited to:

  1. Battery-powered devices: It can be utilized in portable electronics such as smartphones, tablets, and wearable devices to ensure a stable power supply.
  2. IoT (Internet of Things) devices: The voltage regulator finds application in IoT devices that require precise voltage regulation for reliable operation.
  3. Embedded systems: It is suitable for embedded systems where a stable power source is crucial for the proper functioning of microcontrollers and other components.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the RT9030-18GU5 include:

  1. LM1117-1.8: A popular voltage regulator with a fixed output voltage of 1.8V.
  2. MCP1700-1802E: Another voltage regulator offering a fixed 1.8V output voltage, known for its low quiescent current.
  3. LP2985-18DBVR: This model provides a fixed 1.8V output voltage and features low dropout voltage.

These alternative models can be considered based on specific requirements and compatibility with the target application.

Word count: 527 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät RT9030-18GU5 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of RT9030-18GU5 in technical solutions:

  1. Q: What is RT9030-18GU5? A: RT9030-18GU5 is a voltage regulator IC (integrated circuit) that provides a fixed output voltage of 1.8V.

  2. Q: What are the typical applications of RT9030-18GU5? A: RT9030-18GU5 is commonly used in various electronic devices such as mobile phones, tablets, portable media players, and other battery-powered devices.

  3. Q: What is the input voltage range for RT9030-18GU5? A: The input voltage range for RT9030-18GU5 is typically between 2.5V and 5.5V.

  4. Q: What is the maximum output current of RT9030-18GU5? A: The maximum output current of RT9030-18GU5 is typically 300mA.

  5. Q: Does RT9030-18GU5 require any external components for operation? A: Yes, RT9030-18GU5 requires a few external components such as input and output capacitors for stability and filtering.

  6. Q: Can RT9030-18GU5 operate in a wide temperature range? A: Yes, RT9030-18GU5 is designed to operate in a wide temperature range, typically from -40°C to +85°C.

  7. Q: Is RT9030-18GU5 a low dropout regulator (LDO)? A: Yes, RT9030-18GU5 is an LDO regulator, which means it can maintain a stable output voltage even when the input voltage is close to the output voltage.

  8. Q: What is the dropout voltage of RT9030-18GU5? A: The dropout voltage of RT9030-18GU5 is typically around 200mV at full load.

  9. Q: Can RT9030-18GU5 handle short-circuit conditions? A: Yes, RT9030-18GU5 has built-in protection features such as current limiting and thermal shutdown to handle short-circuit conditions.

  10. Q: Is RT9030-18GU5 available in different package options? A: Yes, RT9030-18GU5 is available in various package options such as SOT-23, SOT-89, and DFN, allowing flexibility in design and PCB layout.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for RT9030-18GU5.