Rohm Semiconductor
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
BD4155FV-E2
Näytä Yksityiskohdat DataSheets

BD4155FV-E2

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, compact size, low power consumption
  • Package: SOP-8
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 24V
  • Output Voltage Range: 1.2V to 18V
  • Maximum Output Current: 1.5A
  • Quiescent Current: 50µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The BD4155FV-E2 has a SOP-8 package with the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)
  6. COMP (Compensation)
  7. SS (Soft Start)
  8. PGND (Power Ground)

Functional Features

  • Wide input voltage range for versatile applications
  • High efficiency conversion for reduced power loss
  • Overcurrent protection for enhanced safety
  • Soft start function to prevent inrush current
  • Thermal shutdown protection to prevent overheating

Advantages

  • Compact size allows for space-saving designs
  • Low power consumption for energy-efficient operation
  • Wide input voltage range enables compatibility with various power sources
  • Overcurrent protection ensures device and circuit safety
  • Soft start function prevents damage from inrush current
  • Thermal shutdown protection prevents overheating and extends product lifespan

Disadvantages

  • Limited maximum output current of 1.5A may not be suitable for high-power applications
  • Operating temperature range of -40°C to +85°C may restrict usage in extreme environments

Working Principles

The BD4155FV-E2 is a voltage regulator IC that regulates the input voltage to a stable output voltage. It utilizes a feedback mechanism to continuously monitor and adjust the output voltage, ensuring it remains within the desired range. The IC employs various control techniques to achieve high efficiency and low power consumption.

Detailed Application Field Plans

The BD4155FV-E2 is commonly used in the following applications:

  1. Power supplies for consumer electronics
  2. Battery-powered devices
  3. Industrial automation systems
  4. Automotive electronics
  5. LED lighting systems

Detailed and Complete Alternative Models

  1. BD4147FV-E2: Similar specifications with a lower maximum output current of 1A
  2. BD4165FV-E2: Higher maximum output current of 2A, suitable for higher-power applications
  3. BD4178FV-E2: Enhanced thermal performance with an extended operating temperature range of -40°C to +105°C

(Note: This list is not exhaustive and other alternative models may exist.)

Word count: 320 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät BD4155FV-E2 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of BD4155FV-E2 in technical solutions:

  1. Q: What is BD4155FV-E2? A: BD4155FV-E2 is a specific model of integrated circuit (IC) that is commonly used in technical solutions for various applications.

  2. Q: What are the key features of BD4155FV-E2? A: Some key features of BD4155FV-E2 include low power consumption, high efficiency, multiple input/output channels, and built-in protection mechanisms.

  3. Q: What are the typical applications of BD4155FV-E2? A: BD4155FV-E2 is often used in applications such as power management, motor control, LED lighting, battery charging, and other similar technical solutions.

  4. Q: How does BD4155FV-E2 help in power management? A: BD4155FV-E2 provides efficient power conversion and regulation capabilities, allowing it to optimize power usage and improve overall system performance.

  5. Q: Can BD4155FV-E2 be used for motor control applications? A: Yes, BD4155FV-E2 can be used for motor control by providing precise control signals and driving the motor with appropriate voltage and current levels.

  6. Q: Does BD4155FV-E2 support LED lighting applications? A: Yes, BD4155FV-E2 can be used to drive LEDs by providing constant current or voltage control, ensuring proper illumination and extending LED lifespan.

  7. Q: Can BD4155FV-E2 be used for battery charging? A: Yes, BD4155FV-E2 supports battery charging applications by providing charging control algorithms, voltage regulation, and protection mechanisms.

  8. Q: What are the input/output channels available in BD4155FV-E2? A: BD4155FV-E2 typically offers multiple input channels for power supply and various output channels for driving loads or connecting to other components.

  9. Q: Does BD4155FV-E2 have built-in protection mechanisms? A: Yes, BD4155FV-E2 incorporates protection features such as overvoltage protection, overcurrent protection, and thermal shutdown to safeguard the system.

  10. Q: Are there any specific design considerations when using BD4155FV-E2? A: It is important to consider factors like input/output voltage requirements, load characteristics, thermal management, and PCB layout guidelines provided in the datasheet when designing with BD4155FV-E2.

Please note that these answers are general and may vary depending on the specific application and requirements.