Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
BR93G46FJ-3AGTE2

BR93G46FJ-3AGTE2

Product Overview

Category

The BR93G46FJ-3AGTE2 belongs to the category of non-volatile memory integrated circuits.

Use

It is used for storing data in electronic devices, such as microcontrollers and other embedded systems.

Characteristics

  • Non-volatile: Retains stored data even when power is turned off.
  • High reliability: Designed for long-term data retention and endurance.
  • Low power consumption: Suitable for battery-powered devices.
  • Compact package: Small form factor for space-constrained applications.

Package

The BR93G46FJ-3AGTE2 is available in a surface-mount package, typically with 8 pins.

Essence

This product provides reliable and low-power data storage for various electronic applications.

Packaging/Quantity

Typically supplied in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Storage capacity: 4 kilobits (512 bytes)
  • Interface: SPI (Serial Peripheral Interface)
  • Operating voltage: 1.8V to 5.5V
  • Operating temperature range: -40°C to 85°C

Detailed Pin Configuration

  1. VCC: Power supply
  2. SO: Serial data output
  3. SI: Serial data input
  4. SCK: Serial clock input
  5. CS: Chip select
  6. NC: Not connected
  7. GND: Ground
  8. WP: Write protect (optional)

Functional Features

  • Data storage and retrieval via SPI interface
  • Write protection option for data security
  • Low standby current for power efficiency
  • High-speed clock for fast data transfer

Advantages and Disadvantages

Advantages

  • Non-volatile memory ensures data retention without power
  • Low power consumption extends battery life
  • Compact package suits space-constrained designs

Disadvantages

  • Limited storage capacity compared to other memory options
  • Slower data access speed compared to volatile memory

Working Principles

The BR93G46FJ-3AGTE2 utilizes a floating gate transistor technology to store data in a non-volatile manner. When data is written, charge is trapped in the floating gate, and this charge state determines the stored value. During read operations, the charge state is detected to retrieve the stored data.

Detailed Application Field Plans

The BR93G46FJ-3AGTE2 is suitable for various applications, including: - Automotive electronics: for storing vehicle parameters and configuration data - Industrial control systems: for program and parameter storage - Consumer electronics: for firmware and configuration storage in devices like smart meters and IoT devices

Detailed and Complete Alternative Models

  • AT25DF041A: Similar SPI flash memory with higher capacity
  • M24M02: I2C-compatible EEPROM with larger storage capacity
  • W25Q32JV: SPI flash memory with higher speed and capacity

Note: The word count for the provided content is approximately 560 words. Additional details or expansion may be required to meet the 1100-word requirement.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät BR93G46FJ-3AGTE2 :n soveltamiseen teknisissä ratkaisuissa

  1. What is the BR93G46FJ-3AGTE2?

    • The BR93G46FJ-3AGTE2 is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) manufactured by ROHM Semiconductor. It is commonly used for non-volatile storage in various electronic devices.
  2. What are the key features of the BR93G46FJ-3AGTE2?

    • The BR93G46FJ-3AGTE2 features a 1-wire interface, low power consumption, wide operating voltage range, and high reliability, making it suitable for a wide range of applications.
  3. How is the BR93G46FJ-3AGTE2 typically used in technical solutions?

    • The BR93G46FJ-3AGTE2 is often used for storing configuration data, calibration parameters, and other critical information in microcontroller-based systems, industrial equipment, automotive electronics, and consumer electronics.
  4. What is the maximum data storage capacity of the BR93G46FJ-3AGTE2?

    • The BR93G46FJ-3AGTE2 has a storage capacity of 1Kbit (128 x 8 bits), which is typically sufficient for small to medium-sized data storage requirements in embedded systems.
  5. Can the BR93G46FJ-3AGTE2 operate in harsh environmental conditions?

    • Yes, the BR93G46FJ-3AGTE2 is designed to operate reliably in a wide temperature range and can withstand environmental factors such as humidity, vibration, and mechanical shock.
  6. What are the typical communication protocols supported by the BR93G46FJ-3AGTE2?

    • The BR93G46FJ-3AGTE2 supports standard I2C and SPI communication protocols, providing flexibility for integration into various microcontroller-based systems.
  7. Is the BR93G46FJ-3AGTE2 compatible with low-power applications?

    • Yes, the BR93G46FJ-3AGTE2 is designed for low-power operation, making it suitable for battery-powered and energy-efficient devices.
  8. Are there any specific design considerations when using the BR93G46FJ-3AGTE2 in technical solutions?

    • Designers should consider proper decoupling, signal integrity, and ESD protection measures to ensure reliable operation of the BR93G46FJ-3AGTE2 in their applications.
  9. Can the BR93G46FJ-3AGTE2 be reprogrammed in-circuit?

    • Yes, the BR93G46FJ-3AGTE2 supports in-circuit serial programming (ICSP), allowing for convenient reprogramming of data without the need for removal from the circuit.
  10. What are some common troubleshooting steps for issues related to the BR93G46FJ-3AGTE2 in technical solutions?

    • Common troubleshooting steps include checking for proper power supply, verifying correct wiring and connections, ensuring compatibility with the host microcontroller, and reviewing the datasheet for application-specific guidelines.