Rohm Semiconductor
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
DTA113TKAT146
Näytä Yksityiskohdat DataSheets

DTA113TKAT146

Product Overview

Category

The DTA113TKAT146 belongs to the category of discrete semiconductor products.

Use

It is commonly used as a switching transistor in electronic circuits.

Characteristics

  • Small form factor
  • Low power consumption
  • High switching speed

Package

The DTA113TKAT146 is typically available in a small SOT-23 package.

Essence

This product is essential for amplifying and switching electronic signals in various applications.

Packaging/Quantity

It is usually packaged in reels with a quantity of 3000 units per reel.

Specifications

  • Maximum Collector-Base Voltage: 50V
  • Maximum Collector Current: 100mA
  • Power Dissipation: 200mW
  • Transition Frequency: 250MHz
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The DTA113TKAT146 has three pins: 1. Emitter (E) 2. Base (B) 3. Collector (C)

Functional Features

  • High voltage capability
  • Low saturation voltage
  • Complementary NPN type available (DTA143TKAT146)

Advantages

  • Compact size
  • Suitable for high-frequency applications
  • Low power consumption

Disadvantages

  • Limited maximum collector current
  • Narrow operating temperature range

Working Principles

The DTA113TKAT146 operates based on the principles of bipolar junction transistors, where the flow of current is controlled by the application of a small signal at the base terminal.

Detailed Application Field Plans

This transistor is widely used in: - Audio amplifiers - Switching circuits - Oscillator circuits - Signal processing circuits

Detailed and Complete Alternative Models

Some alternative models to the DTA113TKAT146 include: - DTC113TKAT146 - MMBT3904LT1G - BC847BLT1G

In conclusion, the DTA113TKAT146 is a versatile switching transistor with compact dimensions and high-speed performance, making it suitable for a wide range of electronic applications.

[Word count: 298]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät DTA113TKAT146 :n soveltamiseen teknisissä ratkaisuissa

Sure, here are 10 common questions and answers related to the application of DTA113TKAT146 in technical solutions:

  1. What is DTA113TKAT146?

    • DTA113TKAT146 is a specific type of semiconductor component, often used in electronic circuits for various technical applications.

  2. What are the typical applications of DTA113TKAT146?

    • DTA113TKAT146 is commonly used in amplifier circuits, switching circuits, and voltage regulation applications.

  3. What are the key specifications of DTA113TKAT146?

    • The key specifications include its maximum voltage and current ratings, gain characteristics, and frequency response.

  4. How does DTA113TKAT146 contribute to technical solutions?

    • DTA113TKAT146 can be used to amplify signals, switch electronic components on and off, and regulate voltages within a circuit, making it a versatile component in technical solutions.

  5. What are the important considerations when integrating DTA113TKAT146 into a technical solution?

    • It's crucial to consider the operating conditions, heat dissipation, and compatibility with other components in the circuit.

  6. Can DTA113TKAT146 be used in high-power applications?

    • DTA113TKAT146 is typically used in low to moderate power applications due to its current and voltage limitations.

  7. Are there any alternative components that can be used in place of DTA113TKAT146?

    • Depending on the specific requirements, alternative transistors with similar characteristics may be suitable replacements.

  8. What are the typical failure modes of DTA113TKAT146?

    • Common failure modes include overheating, overvoltage stress, and current overload, which can lead to degradation or permanent damage.

  9. How can DTA113TKAT146 be protected from potential damage in a circuit?

    • Using appropriate current-limiting resistors, voltage clamping diodes, and thermal management techniques can help protect DTA113TKAT146 from damage.

  10. Where can I find detailed technical information about DTA113TKAT146 for my specific application?

    • Detailed datasheets and application notes from semiconductor manufacturers or distributors are valuable resources for obtaining specific technical information about DTA113TKAT146.

I hope these questions and answers provide helpful insights into the application of DTA113TKAT146 in technical solutions. Let me know if you need further assistance!