Sensirion AG
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
SHT30-DIS-F2.5KS
Näytä Yksityiskohdat DataSheets

SHT30-DIS-F2.5KS

Introduction

The SHT30-DIS-F2.5KS is a high-precision, digital humidity and temperature sensor designed for various applications. This entry provides an overview of the product, including its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Overview

Category

The SHT30-DIS-F2.5KS belongs to the category of environmental sensors, specifically designed for measuring humidity and temperature.

Use

It is used in a wide range of applications such as HVAC systems, weather stations, industrial automation, consumer goods, and automotive industry.

Characteristics

  • High precision and accuracy in measuring humidity and temperature
  • Digital output with I2C interface
  • Low power consumption
  • Wide operating voltage range
  • Small form factor

Package

The SHT30-DIS-F2.5KS is available in a compact package suitable for surface mount assembly.

Essence

The essence of this sensor lies in its ability to provide accurate and reliable measurements of humidity and temperature in various environments.

Packaging/Quantity

The sensor is typically supplied in tape and reel packaging, with quantities varying based on customer requirements.

Specifications

  • Humidity Measurement Range: 0-100% RH
  • Temperature Measurement Range: -40°C to 125°C
  • Accuracy:
    • Humidity: ±2% RH
    • Temperature: ±0.3°C
  • Supply Voltage: 2.4V to 5.5V
  • Interface: I2C

Detailed Pin Configuration

The SHT30-DIS-F2.5KS has a standard pin configuration with connections for power supply, ground, and I2C communication lines. The detailed pinout can be found in the product datasheet.

Functional Features

  • High accuracy and reliability
  • Fast response time
  • Low power consumption
  • On-chip heater for self-heating to remove condensation

Advantages and Disadvantages

Advantages

  • High precision measurements
  • Wide operating voltage range
  • Compact form factor
  • Low power consumption

Disadvantages

  • Relatively higher cost compared to some other sensors in the market
  • Limited availability from certain suppliers

Working Principles

The SHT30-DIS-F2.5KS utilizes a capacitive sensing element to measure humidity and a bandgap temperature sensor to measure temperature. These measurements are then converted to digital signals using an integrated analog-to-digital converter (ADC) and communicated via the I2C interface.

Detailed Application Field Plans

HVAC Systems

The sensor can be used in HVAC systems to monitor and control indoor air quality by accurately measuring humidity and temperature.

Weather Stations

In weather stations, the sensor provides precise data for meteorological observations and forecasting.

Industrial Automation

For industrial automation, the sensor ensures optimal environmental conditions in manufacturing facilities and storage areas.

Consumer Goods

In consumer goods, the sensor is utilized in products such as smart thermostats and home weather stations.

Automotive Industry

The sensor finds applications in automotive climate control systems for maintaining comfortable cabin conditions.

Detailed and Complete Alternative Models

  • SHT31-DIS-F2.5K
  • SHT35-DIS-F2.5K
  • SHT40-DIS-F2.5K

These alternative models offer similar functionality with variations in accuracy, measurement range, and additional features.

In conclusion, the SHT30-DIS-F2.5KS is a versatile and reliable sensor that provides accurate measurements of humidity and temperature across various applications. Its high precision, low power consumption, and compact design make it a preferred choice for demanding environmental sensing requirements.

[Word Count: 587]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät SHT30-DIS-F2.5KS :n soveltamiseen teknisissä ratkaisuissa

  1. What is the operating voltage range of SHT30-DIS-F2.5KS?

    • The operating voltage range of SHT30-DIS-F2.5KS is 2.4V to 5.5V.

  2. What is the typical accuracy of SHT30-DIS-F2.5KS for temperature and humidity measurements?

    • The typical accuracy of SHT30-DIS-F2.5KS is ±0.3°C for temperature and ±2% for relative humidity.

  3. Can SHT30-DIS-F2.5KS be used in outdoor applications?

    • Yes, SHT30-DIS-F2.5KS is suitable for outdoor applications as it has a wide operating temperature range and is designed to withstand environmental conditions.

  4. Does SHT30-DIS-F2.5KS require calibration before use?

    • SHT30-DIS-F2.5KS comes factory-calibrated, so it does not require additional calibration before use.

  5. What is the communication interface supported by SHT30-DIS-F2.5KS?

    • SHT30-DIS-F2.5KS supports I2C (Inter-Integrated Circuit) and UART (Universal Asynchronous Receiver-Transmitter) communication interfaces.

  6. Is SHT30-DIS-F2.5KS compatible with Arduino or Raspberry Pi?

    • Yes, SHT30-DIS-F2.5KS is compatible with both Arduino and Raspberry Pi platforms, making it easy to integrate into various projects.

  7. What is the response time of SHT30-DIS-F2.5KS for humidity and temperature measurements?

    • The response time of SHT30-DIS-F2.5KS is typically 8 seconds for humidity and 5 seconds for temperature measurements.

  8. Can SHT30-DIS-F2.5KS be used in battery-powered devices?

    • Yes, SHT30-DIS-F2.5KS has low power consumption, making it suitable for use in battery-powered devices.

  9. What is the maximum sampling rate supported by SHT30-DIS-F2.5KS?

    • The maximum sampling rate of SHT30-DIS-F2.5KS is 0.5 Hz (once every 2 seconds).

  10. Does SHT30-DIS-F2.5KS have built-in heater functionality for dew formation prevention?

    • Yes, SHT30-DIS-F2.5KS includes a built-in heater for dew formation prevention, allowing its use in high-humidity environments.