Sharp Microelectronics
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
GP2Y0D02YK
Näytä Yksityiskohdat DataSheets

GP2Y0D02YK - Infrared Distance Measuring Sensor

Introduction

The GP2Y0D02YK is an infrared distance measuring sensor designed for accurate and reliable distance measurements. This sensor belongs to the category of proximity sensors and is commonly used in various applications such as robotics, automation, and consumer electronics.

Basic Information Overview

  • Category: Proximity Sensor
  • Use: Distance Measurement
  • Characteristics: Infrared technology, compact design
  • Package: Small form factor
  • Essence: Accurate distance measurement
  • Packaging/Quantity: Typically sold individually or in small quantities

Specifications

  • Operating Range: 20 cm to 150 cm
  • Output Type: Analog voltage
  • Supply Voltage: 4.5V to 5.5V
  • Average Current Consumption: 33 mA
  • Dimensions: 29.5 mm × 13.0 mm × 13.5 mm

Detailed Pin Configuration

The GP2Y0D02YK sensor typically features three pins: 1. VCC (Power Supply) 2. GND (Ground) 3. Vo (Analog Output)

Functional Features

  • Accurate distance measurement
  • Compact and lightweight design
  • Low power consumption
  • Reliable performance in various lighting conditions

Advantages and Disadvantages

Advantages: - Accurate distance measurement - Suitable for various applications - Compact design

Disadvantages: - Limited operating range - Susceptible to ambient light interference

Working Principles

The GP2Y0D02YK sensor operates on the principle of infrared reflection. It emits infrared light and measures the time it takes for the light to be reflected back to the sensor. The distance is then calculated based on the time taken for the light to return.

Detailed Application Field Plans

Robotics

The sensor can be used in robotics for obstacle detection and navigation.

Automation

In automated systems, the sensor can be utilized for object detection and positioning.

Consumer Electronics

The sensor can be integrated into consumer electronic devices for touchless control and proximity sensing.

Detailed and Complete Alternative Models

  1. GP2Y0A21YK - Longer range infrared distance sensor
  2. GP2Y0A41SK0F - Compact analog distance sensor with extended range
  3. Sharp GP2Y0A02YK0F - Analog output distance sensor with similar characteristics

In conclusion, the GP2Y0D02YK infrared distance measuring sensor offers a compact and reliable solution for distance measurement in various applications. Despite its limitations, it remains a popular choice for projects requiring accurate proximity sensing within a limited range.

Word Count: 414

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät GP2Y0D02YK :n soveltamiseen teknisissä ratkaisuissa

  1. What is the GP2Y0D02YK sensor used for?

    • The GP2Y0D02YK sensor is commonly used for distance measurement in technical solutions.

  2. What is the operating voltage of the GP2Y0D02YK sensor?

    • The operating voltage of the GP2Y0D02YK sensor is typically around 5V.

  3. How does the GP2Y0D02YK sensor measure distance?

    • The GP2Y0D02YK sensor uses infrared light to measure distance based on the reflection time of the emitted light.

  4. What is the detection range of the GP2Y0D02YK sensor?

    • The GP2Y0D02YK sensor has a detection range of approximately 20cm to 150cm.

  5. Can the GP2Y0D02YK sensor be used outdoors?

    • The GP2Y0D02YK sensor is primarily designed for indoor use and may not perform optimally outdoors due to ambient light interference.

  6. Is the GP2Y0D02YK sensor affected by object color or material?

    • Yes, the GP2Y0D02YK sensor's accuracy can be influenced by the color and reflectivity of the objects it is detecting.

  7. What is the output format of the GP2Y0D02YK sensor?

    • The GP2Y0D02YK sensor typically provides an analog output voltage proportional to the measured distance.

  8. Can the GP2Y0D02YK sensor be integrated with microcontrollers?

    • Yes, the GP2Y0D02YK sensor can be easily integrated with microcontrollers using its analog output.

  9. Are there any calibration requirements for the GP2Y0D02YK sensor?

    • Calibration may be necessary to account for environmental factors and ensure accurate distance measurements.

  10. What are some common applications of the GP2Y0D02YK sensor?

    • Common applications include robotics, proximity sensing, object detection, and interactive displays.