SI5350C-B07413-GTR

Product Overview

• Category: Integrated Circuit (IC)
• Use: Clock Generator and Multiplier
• Characteristics:
  • High-frequency accuracy
  • Low jitter
  • Programmable output frequencies
  • Flexible clock distribution
• Package: QFN (Quad Flat No-leads)
• Essence: Provides accurate clock signals for various applications
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Supply Voltage: 2.5V to 3.63V
• Output Frequency Range: 8kHz to 160MHz
• Number of Outputs: 3
• Output Types: LVCMOS, LVDS, CMOS
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The SI5350C-B07413-GTR has a total of 20 pins. The pin configuration is as follows:

1. VDDA: Analog power supply
2. GND: Ground
3. XTAL: Crystal oscillator input
4. CLKIN: External clock input
5. SDA: I2C serial data input
6. SCL: I2C serial clock input
7. VDD: Digital power supply
8. GND: Ground
9. OUT0: Output 0
10. OUT1: Output 1
11. OUT2: Output 2
12. GND: Ground
13. NC: No connection
14. NC: No connection
15. NC: No connection
16. GND: Ground
17. NC: No connection
18. NC: No connection
19. NC: No connection
20. GND: Ground

Functional Features

• Highly programmable clock generator
• Supports multiple output types
• Integrated phase-locked loop (PLL)
• Low phase noise and jitter
• Flexible frequency synthesis

Advantages and Disadvantages

Advantages

• Accurate and stable clock generation
• Wide range of output frequencies
• Programmable through I2C interface
• Low power consumption
• Small form factor

Disadvantages

• Requires external crystal oscillator or clock input
• Limited number of outputs (3 in this case)
• Relatively high cost compared to simpler clock generators

Working Principles

The SI5350C-B07413-GTR utilizes a phase-locked loop (PLL) to generate precise clock signals. It takes an external reference clock or crystal oscillator input and uses it as a reference to synthesize multiple output frequencies. The PLL allows for frequency multiplication, division, and phase synchronization. The device is programmable through the I2C interface, enabling users to configure the desired output frequencies and other parameters.

Detailed Application Field Plans

The SI5350C-B07413-GTR finds applications in various fields where accurate and flexible clock generation is required. Some of the potential application areas include:

1. Communications: Used in wireless communication systems, base stations, and network equipment.
2. Consumer Electronics: Clock generation for audio/video devices, set-top boxes, and gaming consoles.
3. Industrial Automation: Timing control in industrial machinery, robotics, and process automation.
4. Test and Measurement: Precise timing for test equipment, data acquisition systems, and oscilloscopes.
5. Medical Devices: Clock synchronization in medical imaging equipment, patient monitoring systems, and diagnostic instruments.

Detailed and Complete Alternative Models

1. SI5351A-B-GT: Similar clock generator IC with 8 outputs and extended temperature range.
2. Si5341B-B-GM: Clock generator and jitter attenuator with 4 outputs and advanced clock synchronization features.
3. MAX038CPP: Function generator IC with programmable frequency and waveform generation capabilities.
4. LTC6908CMS8: Low-power precision oscillator with wide frequency range and small package size.

These alternative models offer similar functionality to the SI5350C-B07413-GTR and can be considered based on specific requirements and constraints.

Word count: 510 words