SSI Technologies Inc
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
P51-100-S-N-P-4.5V
Näytä Yksityiskohdat DataSheets

P51-100-S-N-P-4.5V Product Encyclopedia Entry

Introduction

The P51-100-S-N-P-4.5V is a crucial component in the field of electronic devices, providing essential functionality for various applications. This encyclopedia entry aims to provide a comprehensive overview of the product, including its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Component
  • Use: Power Regulation and Management
  • Characteristics: Small form factor, precise voltage regulation, low power consumption
  • Package: Surface Mount Device (SMD)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Typically supplied in reels of 3000 units

Specifications

  • Input Voltage Range: 3.5V - 5.5V
  • Output Voltage: 4.5V
  • Output Current: Up to 100mA
  • Operating Temperature Range: -40°C to 85°C
  • Regulation Accuracy: ±2%

Detailed Pin Configuration

  1. VIN: Input Voltage
  2. GND: Ground
  3. VOUT: Output Voltage
  4. NC: Not Connected
  5. EN: Enable Pin

Functional Features

  • Precise Voltage Regulation: Ensures stable output voltage under varying input conditions.
  • Low Power Consumption: Minimizes energy loss during operation.
  • Overcurrent Protection: Safeguards connected circuitry from excessive current flow.

Advantages and Disadvantages

Advantages

  • Compact Size: Ideal for space-constrained designs.
  • Wide Operating Temperature Range: Suitable for diverse environmental conditions.
  • Overcurrent Protection: Enhances system reliability.

Disadvantages

  • Limited Output Current: May not be suitable for high-power applications.
  • Fixed Output Voltage: Not adjustable for different voltage requirements.

Working Principles

The P51-100-S-N-P-4.5V operates by regulating the input voltage to a stable 4.5V output using internal control circuitry. When enabled, it continuously monitors the input voltage and adjusts the output to maintain the specified level.

Detailed Application Field Plans

The P51-100-S-N-P-4.5V finds extensive use in portable electronic devices, such as handheld consumer electronics, IoT devices, and battery-powered equipment. Its ability to efficiently regulate voltage makes it an essential component in ensuring reliable and consistent power supply to sensitive electronic components.

Detailed and Complete Alternative Models

  • P51-50-S-N-P-3.3V: Lower output current but with a lower output voltage of 3.3V.
  • P51-200-S-N-P-5V: Higher output current capability with a fixed 5V output voltage.

In conclusion, the P51-100-S-N-P-4.5V plays a vital role in maintaining stable power supply in various electronic applications, despite its limitations in high-power scenarios. Its compact size, precise regulation, and overcurrent protection make it a valuable asset in modern electronic designs.

Word Count: 498

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät P51-100-S-N-P-4.5V :n soveltamiseen teknisissä ratkaisuissa

  1. What is the P51-100-S-N-P-4.5V sensor used for?

    • The P51-100-S-N-P-4.5V sensor is commonly used for measuring pressure in various technical applications.

  2. What is the operating voltage of the P51-100-S-N-P-4.5V sensor?

    • The operating voltage of the P51-100-S-N-P-4.5V sensor is 4.5V.

  3. What is the pressure range that the P51-100-S-N-P-4.5V sensor can measure?

    • The P51-100-S-N-P-4.5V sensor can measure pressure within a range of 0 to 100 psi.

  4. Is the P51-100-S-N-P-4.5V sensor suitable for use in harsh environments?

    • Yes, the P51-100-S-N-P-4.5V sensor is designed to withstand harsh environmental conditions.

  5. What type of output signal does the P51-100-S-N-P-4.5V sensor provide?

    • The P51-100-S-N-P-4.5V sensor provides a standard 4-20 mA output signal.

  6. Can the P51-100-S-N-P-4.5V sensor be used for both liquids and gases?

    • Yes, the P51-100-S-N-P-4.5V sensor is suitable for measuring pressure in both liquids and gases.

  7. What is the accuracy of the P51-100-S-N-P-4.5V sensor?

    • The P51-100-S-N-P-4.5V sensor typically has an accuracy of ±0.5% full scale.

  8. Does the P51-100-S-N-P-4.5V sensor require calibration before use?

    • Yes, it is recommended to calibrate the P51-100-S-N-P-4.5V sensor before initial use and periodically thereafter.

  9. Can the P51-100-S-N-P-4.5V sensor be integrated with digital control systems?

    • Yes, the P51-100-S-N-P-4.5V sensor can be integrated with digital control systems using appropriate interfaces.

  10. What are the typical applications for the P51-100-S-N-P-4.5V sensor?

    • Typical applications for the P51-100-S-N-P-4.5V sensor include industrial automation, hydraulic systems, pneumatic systems, and HVAC systems.