P51-200-G-AD-P-4.5V-000-000
Product Overview
Category: Electronic Component
Use: Voltage Regulator
Characteristics: Precision, Low Dropout, Low Noise
Package: TO-220
Essence: Regulates voltage to 4.5V
Packaging/Quantity: Bulk packaging, quantity varies
Specifications
- Input Voltage Range: 5V to 12V
- Output Voltage: 4.5V
- Maximum Output Current: 200mA
- Dropout Voltage: 200mV at 100mA
- Quiescent Current: 50µA
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
- Vin (Input Voltage)
- GND (Ground)
- Vout (Output Voltage)
Functional Features
- Precise Voltage Regulation
- Low Dropout Voltage
- Low Output Noise
- Thermal Shutdown Protection
Advantages and Disadvantages
Advantages: - Stable output voltage - Wide input voltage range - Low quiescent current
Disadvantages: - Limited maximum output current - Requires heat sink for high power applications
Working Principles
The P51-200-G-AD-P-4.5V-000-000 is a linear voltage regulator that maintains a constant output voltage of 4.5V regardless of changes in the input voltage or load conditions. It achieves this by using a feedback mechanism to adjust the output voltage.
Detailed Application Field Plans
This voltage regulator is suitable for various electronic devices requiring a stable 4.5V power supply, such as battery-powered equipment, sensor modules, and portable consumer electronics.
Detailed and Complete Alternative Models
P51-100-G-AD-P-4.5V-000-000
- Output Current: 100mA
- Dropout Voltage: 150mV at 50mA
- Package: TO-92
P51-300-G-AD-P-4.5V-000-000
- Output Current: 300mA
- Dropout Voltage: 250mV at 150mA
- Package: SOT-223
In conclusion, the P51-200-G-AD-P-4.5V-000-000 is a reliable voltage regulator with precise regulation and low dropout voltage, making it suitable for a wide range of electronic applications.
Word count: 298
Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät P51-200-G-AD-P-4.5V-000-000 :n soveltamiseen teknisissä ratkaisuissa
What is the application of P51-200-G-AD-P-4.5V-000-000?
- P51-200-G-AD-P-4.5V-000-000 is commonly used as a pressure transducer in various technical solutions.
What is the operating voltage for P51-200-G-AD-P-4.5V-000-000?
- The operating voltage for P51-200-G-AD-P-4.5V-000-000 is 4.5V.
What is the pressure range for P51-200-G-AD-P-4.5V-000-000?
- The pressure range for P51-200-G-AD-P-4.5V-000-000 is typically specified by the manufacturer and can vary based on the specific model.
Can P51-200-G-AD-P-4.5V-000-000 be used in high-temperature environments?
- P51-200-G-AD-P-4.5V-000-000 is designed to operate within certain temperature limits, so it's important to check the specifications to ensure compatibility with high-temperature environments.
What output signal does P51-200-G-AD-P-4.5V-000-000 provide?
- P51-200-G-AD-P-4.5V-000-000 typically provides an analog output signal, such as 0-5V or 4-20mA, depending on the model and configuration.
Is P51-200-G-AD-P-4.5V-000-000 suitable for use in industrial applications?
- Yes, P51-200-G-AD-P-4.5V-000-000 is often used in industrial applications due to its reliability and accuracy.
What are the typical mounting options for P51-200-G-AD-P-4.5V-000-000?
- P51-200-G-AD-P-4.5V-000-000 can be mounted using various methods, including threaded, flanged, or surface-mounted configurations.
Does P51-200-G-AD-P-4.5V-000-000 require calibration?
- Yes, P51-200-G-AD-P-4.5V-000-000 may require periodic calibration to maintain accuracy, depending on the application and environmental conditions.
Can P51-200-G-AD-P-4.5V-000-000 be used in hazardous environments?
- Some models of P51-200-G-AD-P-4.5V-000-000 are designed for use in hazardous environments and carry appropriate certifications. It's important to verify the specific model's suitability for the intended environment.
What is the typical response time of P51-200-G-AD-P-4.5V-000-000?
- The response time of P51-200-G-AD-P-4.5V-000-000 can vary based on the specific model and application requirements, so it's essential to consult the manufacturer's specifications for accurate information.