SSI Technologies Inc
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
P51-75-S-C-D-4.5OVP-000-000
Näytä Yksityiskohdat DataSheets

P51-75-S-C-D-4.5OVP-000-000

Product Overview

Category

The P51-75-S-C-D-4.5OVP-000-000 belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the output voltage in electronic circuits.

Characteristics

  • Precision voltage regulation
  • Overvoltage protection at 4.5V
  • Compact design
  • High efficiency

Package

The P51-75-S-C-D-4.5OVP-000-000 is typically available in a small, surface-mount package.

Essence

The essence of this product lies in its ability to maintain a stable output voltage under varying input conditions.

Packaging/Quantity

It is usually packaged in reels or trays, with quantities varying based on manufacturer specifications.

Specifications

  • Input Voltage Range: 5V to 30V
  • Output Voltage: 3.3V
  • Maximum Output Current: 1A
  • Operating Temperature Range: -40°C to 125°C
  • Dropout Voltage: 0.5V at 1A

Detailed Pin Configuration

The P51-75-S-C-D-4.5OVP-000-000 has a standard pin configuration with input, output, and ground pins, as well as additional pins for overvoltage protection and feedback.

Functional Features

  • Voltage Regulation: The device ensures a constant output voltage despite fluctuations in the input voltage.
  • Overvoltage Protection: It safeguards connected components by limiting the output voltage to 4.5V in case of an overvoltage event.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Built-in overvoltage protection
  • Small form factor

Disadvantages

  • Limited maximum output current
  • Higher dropout voltage compared to some alternatives

Working Principles

The P51-75-S-C-D-4.5OVP-000-000 utilizes a feedback mechanism to adjust the output voltage based on the input and maintain a stable voltage level. In the event of an overvoltage condition, the protection circuitry activates to limit the output voltage to 4.5V, preventing damage to downstream components.

Detailed Application Field Plans

This voltage regulator is commonly used in low-power electronic devices such as IoT sensors, portable gadgets, and battery-powered systems where maintaining a stable voltage supply is critical for proper operation.

Detailed and Complete Alternative Models

  • P51-75-S-C-D-3.3OVP-000-000: Similar to the P51-75-S-C-D-4.5OVP-000-000 but with overvoltage protection set at 3.3V.
  • P51-100-S-C-D-4.5OVP-000-000: A higher current version of the same voltage regulator with overvoltage protection.

In conclusion, the P51-75-S-C-D-4.5OVP-000-000 is a compact and efficient voltage regulator with precise regulation and built-in overvoltage protection, making it suitable for various low-power electronic applications.

[Word Count: 410]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät P51-75-S-C-D-4.5OVP-000-000 :n soveltamiseen teknisissä ratkaisuissa

  1. What is the application of P51-75-S-C-D-4.5OVP-000-000?

    • The P51-75-S-C-D-4.5OVP-000-000 is a pressure sensor commonly used in industrial and technical solutions to measure and monitor pressure in various systems.

  2. What is the operating range of P51-75-S-C-D-4.5OVP-000-000?

    • The operating range of P51-75-S-C-D-4.5OVP-000-000 is typically from 0 to 75 psi, making it suitable for a wide range of applications.

  3. What are the key features of P51-75-S-C-D-4.5OVP-000-000?

    • The key features of P51-75-S-C-D-4.5OVP-000-000 include its compact design, high accuracy, and built-in overpressure protection (OVP) up to 4.5 times the rated pressure.

  4. How is P51-75-S-C-D-4.5OVP-000-000 installed?

    • P51-75-S-C-D-4.5OVP-000-000 can be installed using standard NPT fittings or other compatible installation methods, following the manufacturer's guidelines.

  5. What are the typical applications of P51-75-S-C-D-4.5OVP-000-000?

    • P51-75-S-C-D-4.5OVP-000-000 is commonly used in hydraulic systems, pneumatic systems, industrial machinery, and HVAC systems for pressure monitoring and control.

  6. Is P51-75-S-C-D-4.5OVP-000-000 suitable for harsh environments?

    • Yes, P51-75-S-C-D-4.5OVP-000-000 is designed to withstand harsh industrial environments and is often used in applications where resistance to vibration and shock is required.

  7. What output signals does P51-75-S-C-D-4.5OVP-000-000 provide?

    • P51-75-S-C-D-4.5OVP-000-000 typically provides analog output signals such as 4-20 mA or 0-10 VDC, making it compatible with various control and monitoring systems.

  8. Can P51-75-S-C-D-4.5OVP-000-000 be used for both liquid and gas pressure measurement?

    • Yes, P51-75-S-C-D-4.5OVP-000-000 is suitable for measuring both liquid and gas pressures, offering versatility in different applications.

  9. What calibration and maintenance procedures are recommended for P51-75-S-C-D-4.5OVP-000-000?

    • Regular calibration and maintenance according to the manufacturer's guidelines are recommended to ensure accurate and reliable performance of P51-75-S-C-D-4.5OVP-000-000.

  10. Are there any special considerations when integrating P51-75-S-C-D-4.5OVP-000-000 into a technical solution?

    • It's important to consider factors such as electrical compatibility, environmental conditions, and mounting orientation when integrating P51-75-S-C-D-4.5OVP-000-000 into a technical solution to optimize its performance and longevity.