STMicroelectronics
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
E-TDA7386
Näytä Yksityiskohdat DataSheets

E-TDA7386

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Audio Power Amplifier
  • Characteristics:
    • High output power
    • Low distortion
    • Wide frequency response
    • Compact size
  • Package: Multiwatt15V
  • Essence: Power amplifier IC for audio applications
  • Packaging/Quantity: Typically sold in reels of 250 units

Specifications

  • Supply Voltage: 8V to 18V
  • Output Power: Up to 45W per channel
  • Total Harmonic Distortion (THD): <0.5%
  • Frequency Response: 20Hz to 20kHz
  • Operating Temperature Range: -40°C to +105°C

Detailed Pin Configuration

The E-TDA7386 has a total of 15 pins, which are configured as follows:

  1. Mute/Standby
  2. Input 1 - Non-Inverting Input
  3. Input 1 - Inverting Input
  4. GND (Ground)
  5. Output 1 - Non-Inverting Output
  6. Output 1 - Inverting Output
  7. Vcc (Supply Voltage)
  8. Bootstrap Capacitor
  9. Output 2 - Inverting Output
  10. Output 2 - Non-Inverting Output
  11. Input 2 - Inverting Input
  12. Input 2 - Non-Inverting Input
  13. Diagnostic Output
  14. Diagnostic Ground
  15. Diagnostic Supply Voltage

Functional Features

  • High-quality audio amplification
  • Built-in diagnostic features for fault detection
  • Short-circuit and thermal protection
  • Low external component count
  • Flexible input configuration options

Advantages and Disadvantages

Advantages

  • High output power capability
  • Low distortion for improved audio quality
  • Wide frequency response for accurate reproduction
  • Compact size for space-constrained applications
  • Built-in diagnostic features enhance reliability

Disadvantages

  • Requires external heat sink for proper thermal management
  • Limited output power compared to some higher-end amplifiers
  • Not suitable for high-voltage applications

Working Principles

The E-TDA7386 is a class AB audio power amplifier IC that operates by amplifying low-level audio signals from input sources. It utilizes multiple internal stages to amplify the signal and deliver it to the connected speakers with increased power. The built-in diagnostic features monitor the amplifier's performance and protect it from faults such as short circuits or overheating.

Detailed Application Field Plans

The E-TDA7386 is commonly used in various audio applications, including: - Car audio systems - Home theater systems - Portable audio devices - Professional audio equipment

Detailed and Complete Alternative Models

Some alternative models to the E-TDA7386 include: - TDA7377: Similar power amplifier IC with lower output power but lower cost. - TDA7850: Higher-power amplifier IC with more advanced features. - LM3886: Class AB amplifier IC with higher output power and excellent audio quality.

Please note that the above alternatives may have different pin configurations and specifications, so careful consideration should be given when selecting an alternative model.

Word count: 346 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät E-TDA7386 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of E-TDA7386 in technical solutions:

  1. Q: What is E-TDA7386? A: E-TDA7386 is a high-performance audio amplifier integrated circuit (IC) commonly used in automotive and other audio applications.

  2. Q: What is the power output of E-TDA7386? A: The power output of E-TDA7386 can vary depending on the configuration, but it typically ranges from 25 watts to 45 watts per channel.

  3. Q: Can E-TDA7386 be used in car audio systems? A: Yes, E-TDA7386 is widely used in car audio systems due to its compact size, high power output, and efficient performance.

  4. Q: Does E-TDA7386 require any external components for operation? A: Yes, E-TDA7386 requires some external components such as capacitors, resistors, and inductors to form a complete audio amplifier circuit.

  5. Q: What is the input voltage range for E-TDA7386? A: The recommended input voltage range for E-TDA7386 is typically between 8 volts and 18 volts.

  6. Q: Can E-TDA7386 drive multiple speakers simultaneously? A: Yes, E-TDA7386 is designed to drive multiple speakers in a stereo or multi-channel configuration, making it suitable for various audio setups.

  7. Q: Is E-TDA7386 compatible with digital audio signals? A: No, E-TDA7386 is an analog audio amplifier IC and is not directly compatible with digital audio signals. It requires a separate digital-to-analog converter (DAC) if you want to use it with digital sources.

  8. Q: Can E-TDA7386 be used in home audio systems? A: While primarily designed for automotive applications, E-TDA7386 can also be used in home audio systems with the appropriate power supply and circuitry.

  9. Q: Does E-TDA7386 have built-in protection features? A: Yes, E-TDA7386 incorporates various protection features like thermal shutdown, overvoltage protection, and short-circuit protection to safeguard the amplifier and connected speakers.

  10. Q: Are there any recommended application circuits available for E-TDA7386? A: Yes, the datasheet of E-TDA7386 provides several recommended application circuits that can serve as a starting point for designing audio amplifier solutions using this IC.

Please note that these answers are general and may vary depending on specific implementation requirements and circuit design considerations.