STMicroelectronics
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MC3403N
Näytä Yksityiskohdat DataSheets

MC3403N

Product Overview

Category

MC3403N belongs to the category of integrated circuits (ICs).

Use

It is commonly used as an operational amplifier (op-amp) in various electronic circuits.

Characteristics

  • Low input offset voltage
  • Low input bias current
  • High gain bandwidth product
  • Wide supply voltage range
  • Low power consumption

Package

MC3403N is available in a DIP-14 package.

Essence

The essence of MC3403N lies in its ability to amplify and process analog signals with high precision and stability.

Packaging/Quantity

MC3403N is typically packaged in tubes or reels, with quantities varying depending on the supplier.

Specifications

  • Supply Voltage: ±1.5V to ±16V
  • Input Offset Voltage: 2mV (maximum)
  • Input Bias Current: 20nA (maximum)
  • Gain Bandwidth Product: 1MHz (typical)
  • Slew Rate: 0.5V/µs (typical)
  • Common Mode Rejection Ratio: 70dB (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

MC3403N has a total of 14 pins, which are assigned specific functions as follows:

  1. Non-Inverting Input 1 (+IN1)
  2. Inverting Input 1 (-IN1)
  3. Output 1 (OUT1)
  4. VCC (Positive Power Supply)
  5. Non-Inverting Input 2 (+IN2)
  6. Inverting Input 2 (-IN2)
  7. Output 2 (OUT2)
  8. Ground (GND)
  9. Non-Inverting Input 3 (+IN3)
  10. Inverting Input 3 (-IN3)
  11. Output 3 (OUT3)
  12. NC (No Connection)
  13. VEE (Negative Power Supply)
  14. Null

Functional Features

  1. High precision amplification of analog signals
  2. Low power consumption for energy-efficient operation
  3. Wide supply voltage range allows flexibility in various applications
  4. Low input offset voltage ensures accurate signal processing
  5. High gain bandwidth product enables amplification of high-frequency signals
  6. Excellent common mode rejection ratio minimizes noise interference

Advantages and Disadvantages

Advantages

  • Precise amplification of analog signals
  • Low power consumption
  • Wide supply voltage range
  • Accurate signal processing

Disadvantages

  • Limited gain bandwidth product compared to some other op-amps
  • Higher input bias current than certain alternatives

Working Principles

MC3403N operates based on the principles of differential amplification. It amplifies the voltage difference between its non-inverting and inverting inputs, producing an output voltage proportional to this difference. The internal circuitry of MC3403N ensures stability, accuracy, and low distortion in signal amplification.

Detailed Application Field Plans

MC3403N finds extensive application in various electronic circuits, including but not limited to: - Audio amplifiers - Signal conditioning circuits - Active filters - Voltage regulators - Oscillators - Comparators - Instrumentation amplifiers

Detailed and Complete Alternative Models

Some alternative models that can be considered as substitutes for MC3403N include: - LM324 - TL084 - OP07 - CA3140 - NE5532

These alternatives offer similar functionality and characteristics, providing options for different design requirements.

Word count: 491 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MC3403N :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of MC3403N in technical solutions:

  1. Q: What is MC3403N? A: MC3403N is a quad operational amplifier (op-amp) integrated circuit commonly used in various electronic applications.

  2. Q: What is the voltage supply range for MC3403N? A: The voltage supply range for MC3403N is typically between ±3V and ±18V.

  3. Q: What is the maximum output current of MC3403N? A: The maximum output current of MC3403N is approximately 20mA.

  4. Q: Can MC3403N be used as a comparator? A: Yes, MC3403N can be used as a comparator, although it is primarily designed as an op-amp.

  5. Q: What is the input offset voltage of MC3403N? A: The input offset voltage of MC3403N is typically around 2mV.

  6. Q: Is MC3403N suitable for low-power applications? A: Yes, MC3403N is known for its low power consumption, making it suitable for low-power applications.

  7. Q: Can MC3403N operate at high temperatures? A: MC3403N has a wide operating temperature range, typically from -40°C to +85°C, allowing it to function in high-temperature environments.

  8. Q: What is the gain bandwidth product of MC3403N? A: The gain bandwidth product of MC3403N is typically around 1MHz.

  9. Q: Can MC3403N be used in audio applications? A: Yes, MC3403N can be used in audio applications such as audio amplifiers and tone control circuits.

  10. Q: Is MC3403N available in different package types? A: Yes, MC3403N is available in various package types, including DIP (Dual Inline Package) and SOIC (Small Outline Integrated Circuit).

Please note that the answers provided here are general and may vary depending on specific datasheet specifications or application requirements.