Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
STTA112U

STTA112U

Product Overview

Category: Diode
Use: Rectification
Characteristics: Fast recovery, low forward voltage drop
Package: TO-220AC
Essence: High efficiency rectification
Packaging/Quantity: Tape and reel, 500 units per reel

Specifications

  • Voltage Rating: 120V
  • Current Rating: 60A
  • Recovery Time: 35ns
  • Forward Voltage Drop: 0.95V at 30A

Detailed Pin Configuration

The STTA112U diode has a standard TO-220AC package with three pins. The pinout configuration is as follows: 1. Pin 1: Anode 2. Pin 2: Cathode 3. Pin 3: Not connected (Tab)

Functional Features

  • Fast recovery time for high-frequency applications
  • Low forward voltage drop for improved efficiency
  • High current capability for power applications

Advantages

  • High efficiency in rectification
  • Suitable for high-frequency applications
  • Robust construction for reliable operation

Disadvantages

  • Relatively higher forward voltage drop compared to some alternatives
  • Larger package size compared to SMD diodes

Working Principles

The STTA112U operates on the principle of fast recovery, allowing it to swiftly transition from conducting to non-conducting states during each cycle of the input signal. This enables efficient rectification of high-frequency AC signals.

Detailed Application Field Plans

The STTA112U is well-suited for use in: - Switch-mode power supplies - Motor drives - Inverters - Welding equipment - UPS (Uninterruptible Power Supplies)

Detailed and Complete Alternative Models

Some alternative models to the STTA112U include: - STTH60P03SW - MUR1560G - IRFP460LC

This completes the entry for STTA112U, providing comprehensive information about its product category, specifications, features, and application areas.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät STTA112U :n soveltamiseen teknisissä ratkaisuissa

Sure, here are 10 common questions and answers related to the application of STTA112U in technical solutions:

  1. What is STTA112U?

    • STTA112U is a high voltage ultrafast diode designed for use in various technical solutions such as power factor correction, switch mode power supplies, and freewheeling diodes.
  2. What is the maximum repetitive peak reverse voltage of STTA112U?

    • The maximum repetitive peak reverse voltage of STTA112U is 1200V.
  3. What is the typical forward voltage drop of STTA112U at a specified current?

    • The typical forward voltage drop of STTA112U at 25°C is 1.35V at a forward current of 8A.
  4. What is the maximum junction temperature of STTA112U?

    • The maximum junction temperature of STTA112U is 175°C.
  5. What are the typical applications of STTA112U?

    • Typical applications of STTA112U include power factor correction circuits, switch mode power supplies, and freewheeling diodes in inverters and motor control systems.
  6. What is the reverse recovery time of STTA112U?

    • The reverse recovery time of STTA112U is typically 35ns at a forward current of 8A.
  7. Is STTA112U suitable for high frequency switching applications?

    • Yes, STTA112U is suitable for high frequency switching applications due to its ultrafast recovery time and low forward voltage drop.
  8. Does STTA112U have an integrated snubber diode?

    • No, STTA112U does not have an integrated snubber diode and may require external snubber circuitry in certain applications.
  9. What package type is STTA112U available in?

    • STTA112U is available in a D²PAK (TO-263) package, which provides excellent thermal performance and high power dissipation capability.
  10. What are the key advantages of using STTA112U in technical solutions?

    • The key advantages of using STTA112U include its high voltage capability, ultrafast recovery time, low forward voltage drop, and suitability for high frequency switching applications.

I hope these questions and answers provide the information you were looking for! If you have any more specific questions, feel free to ask.