STMicroelectronics
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
TDA2005R
Näytä Yksityiskohdat DataSheets

TDA2005R

Overview

Product Category

TDA2005R belongs to the category of integrated audio amplifier circuits.

Use

The TDA2005R is primarily used for amplifying audio signals in various electronic devices such as radios, televisions, and car audio systems.

Characteristics

  • The TDA2005R is a monolithic IC with a power output of up to 20 Watts.
  • It operates on a wide range of supply voltages, typically between 8V and 18V.
  • This audio amplifier circuit offers high-quality sound reproduction with low distortion.
  • It has built-in protection features against short circuits and thermal overload.

Package and Quantity

The TDA2005R is available in a standard 11-pin package. It is commonly sold individually or in packs of multiple units.

Essence

The essence of the TDA2005R lies in its ability to provide efficient amplification of audio signals while maintaining sound fidelity and reliability.

Specifications

  • Power Output: Up to 20 Watts
  • Supply Voltage Range: 8V - 18V
  • Total Harmonic Distortion: <0.5%
  • Frequency Response: 20Hz - 20kHz
  • Input Sensitivity: 150mV
  • Quiescent Current: 50mA

Pin Configuration

The TDA2005R features an 11-pin configuration:

  1. Mute/Standby
  2. Non-Inverting Input
  3. Inverting Input
  4. Ground
  5. Output
  6. Bootstrap Capacitor
  7. Supply Voltage (Vcc)
  8. Supply Voltage (Vcc)
  9. Feedback Resistor
  10. Feedback Capacitor
  11. Mute/Standby

Functional Features

  • High power output capability
  • Low distortion and noise levels
  • Built-in short circuit and thermal overload protection
  • Mute/Standby function for power saving and audio muting

Advantages and Disadvantages

Advantages

  • High-quality sound reproduction
  • Wide supply voltage range allows flexibility in various applications
  • Built-in protection features enhance reliability and durability
  • Compact size and easy integration into electronic devices

Disadvantages

  • Limited power output compared to higher wattage amplifiers
  • Requires external components for proper operation
  • Sensitivity to improper circuit layout or component selection may affect performance

Working Principles

The TDA2005R operates as a class AB audio amplifier. It amplifies the input audio signal by using a combination of transistors and integrated circuits. The amplified signal is then delivered to the output stage, which drives the connected speaker or load.

Detailed Application Field Plans

The TDA2005R finds application in various audio amplification scenarios, including: 1. Home audio systems 2. Car audio systems 3. Portable speakers 4. Radios and televisions 5. Public address systems

Alternative Models

For those seeking alternative options, the following integrated audio amplifier circuits can be considered: 1. TDA2030A 2. LM386 3. TDA2822M 4. TDA7265 5. STA540

These alternatives offer similar functionality and can be suitable replacements for the TDA2005R in different applications.

In conclusion, the TDA2005R is an integrated audio amplifier circuit that provides efficient amplification of audio signals with high sound quality. Its compact size, wide supply voltage range, and built-in protection features make it a versatile choice for various audio amplification applications.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät TDA2005R :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of TDA2005R in technical solutions:

  1. Q: What is TDA2005R? A: TDA2005R is a class B dual audio power amplifier integrated circuit (IC) that can be used in various audio applications.

  2. Q: What is the maximum output power of TDA2005R? A: The maximum output power of TDA2005R is typically around 20 watts per channel when operating at a 4-ohm load.

  3. Q: Can TDA2005R operate with a single power supply? A: Yes, TDA2005R can operate with a single power supply ranging from 8V to 18V DC.

  4. Q: How many channels does TDA2005R support? A: TDA2005R is a dual-channel amplifier, meaning it supports two audio channels.

  5. Q: What is the input impedance of TDA2005R? A: The input impedance of TDA2005R is typically around 22 kilohms.

  6. Q: Can TDA2005R drive low-impedance speakers? A: Yes, TDA2005R is capable of driving speakers with an impedance as low as 2 ohms.

  7. Q: Does TDA2005R require external heat sinks? A: Yes, TDA2005R requires external heat sinks to dissipate heat generated during operation.

  8. Q: Is TDA2005R protected against short circuits and thermal overload? A: Yes, TDA2005R has built-in protection mechanisms against short circuits and thermal overload.

  9. Q: Can TDA2005R be used in car audio systems? A: Yes, TDA2005R is commonly used in car audio systems due to its compact size and ability to operate with a 12V power supply.

  10. Q: What are the typical applications of TDA2005R? A: TDA2005R can be used in various audio applications such as stereo amplifiers, portable speakers, home theater systems, and car audio amplifiers.

Please note that these answers are general and may vary depending on specific circuit designs and application requirements.