STMicroelectronics
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
TDA7293V
Näytä Yksityiskohdat DataSheets

TDA7293V

Overview

Category

TDA7293V belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in audio amplifier applications.

Characteristics

  • High output power capability
  • Low distortion
  • Excellent thermal stability
  • Mute and standby functions
  • Short-circuit protection
  • Thermal shutdown protection

Package

TDA7293V is available in a multiwatt15 package.

Essence

The essence of TDA7293V lies in its ability to provide high-quality audio amplification with low distortion and excellent thermal stability.

Packaging/Quantity

TDA7293V is typically packaged in tubes or reels, with quantities varying depending on the supplier.

Specifications

  • Supply voltage range: 6V to 60V
  • Output power: Up to 100W
  • Total harmonic distortion: <0.1%
  • Operating temperature range: -40°C to +150°C
  • Input impedance: 22kΩ
  • Output impedance: 0.1Ω

Detailed Pin Configuration

  1. V+ (Positive supply voltage)
  2. IN- (Inverting input)
  3. IN+ (Non-inverting input)
  4. GND (Ground)
  5. MUTE (Mute control)
  6. ST-BY (Standby control)
  7. OUT (Output)
  8. VS (Supply voltage)

Functional Features

  • High output power for various audio applications
  • Low distortion ensures accurate sound reproduction
  • Mute function allows for silent operation when required
  • Standby function conserves power during idle periods
  • Short-circuit protection prevents damage to the IC
  • Thermal shutdown protection safeguards against overheating

Advantages and Disadvantages

Advantages

  • High output power capability
  • Low distortion for accurate audio reproduction
  • Excellent thermal stability
  • Mute and standby functions for convenience and power saving
  • Built-in protection features

Disadvantages

  • Requires external components for a complete audio amplifier circuit
  • Higher cost compared to some other audio amplifier ICs

Working Principles

TDA7293V operates as a class AB audio amplifier. It amplifies the input audio signal and delivers it to the output with high power and low distortion. The IC incorporates various protection mechanisms to ensure safe operation and prevent damage.

Detailed Application Field Plans

TDA7293V finds applications in various audio systems, including: 1. Home theater systems 2. Car audio systems 3. Professional audio equipment 4. Musical instruments amplification 5. Public address systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to TDA7293V are: 1. LM3886 2. TDA2050 3. STA540 4. TDA2030A 5. TDA7265

These models offer similar functionality and can be used as substitutes depending on specific requirements.

In conclusion, TDA7293V is a versatile audio amplifier IC that provides high-quality sound reproduction with low distortion. Its wide range of applications and built-in protection features make it a popular choice among audio enthusiasts and professionals alike.

Word count: 487

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät TDA7293V :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of TDA7293V in technical solutions:

  1. Q: What is the maximum power output of the TDA7293V amplifier? A: The TDA7293V can deliver a maximum power output of 100 watts into an 8-ohm load.

  2. Q: Can the TDA7293V be used as a stereo amplifier? A: Yes, the TDA7293V can be configured as a stereo amplifier by using two separate chips for the left and right channels.

  3. Q: What is the recommended power supply voltage for the TDA7293V? A: The recommended power supply voltage for the TDA7293V is ±25 volts DC.

  4. Q: Is it possible to bridge two TDA7293V amplifiers for higher power output? A: Yes, two TDA7293V amplifiers can be bridged to increase the power output. This configuration can deliver up to 200 watts into an 8-ohm load.

  5. Q: Can the TDA7293V drive low-impedance loads? A: Yes, the TDA7293V is capable of driving loads as low as 4 ohms without any issues.

  6. Q: Does the TDA7293V require external heat sinks? A: Yes, the TDA7293V requires external heat sinks to dissipate heat generated during operation. Proper heat sinking is crucial to ensure reliable performance.

  7. Q: Can the TDA7293V be used in automotive audio applications? A: Yes, the TDA7293V can be used in automotive audio applications as long as the power supply voltage and thermal considerations are taken into account.

  8. Q: What is the input impedance of the TDA7293V? A: The input impedance of the TDA7293V is typically around 100 kilohms.

  9. Q: Does the TDA7293V require any external compensation components? A: No, the TDA7293V does not require any external compensation components. It is internally compensated for stability.

  10. Q: Can the TDA7293V be used in bridge-tied load (BTL) configuration? A: Yes, the TDA7293V can be used in bridge-tied load configuration to drive a single speaker with increased power output.

Please note that these answers are general and may vary depending on specific application requirements and circuit design considerations.