STMicroelectronics
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
TSM1011ID
Näytä Yksityiskohdat DataSheets

TSM1011ID

Product Overview

Category

TSM1011ID belongs to the category of integrated circuits (ICs).

Use

The TSM1011ID is primarily used as a voltage regulator in electronic devices.

Characteristics

  • The TSM1011ID is a low-dropout linear voltage regulator.
  • It operates with a wide input voltage range, making it suitable for various applications.
  • The device has a high output current capability, allowing it to power multiple components simultaneously.
  • It offers excellent line and load regulation, ensuring stable output voltage under varying conditions.

Package

The TSM1011ID is available in a small outline package (SOP) format.

Essence

The essence of the TSM1011ID lies in its ability to regulate voltage efficiently and reliably.

Packaging/Quantity

The TSM1011ID is typically packaged in reels or tubes, containing a specified quantity of units per package.

Specifications

  • Input Voltage Range: 2.5V - 16V
  • Output Voltage Range: 1.2V - 12V
  • Maximum Output Current: 1A
  • Dropout Voltage: 0.3V @ 1A
  • Quiescent Current: 100µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TSM1011ID features the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)
  4. BYP (Bypass Capacitor)
  5. EN (Enable)

Functional Features

  • Voltage Regulation: The TSM1011ID ensures a stable output voltage regardless of input voltage fluctuations.
  • Current Limiting: It incorporates a current limit feature to protect the device and connected components from excessive current.
  • Thermal Protection: The TSM1011ID includes built-in thermal shutdown protection to prevent overheating.
  • Enable Pin: The EN pin allows for easy on/off control of the regulator.

Advantages and Disadvantages

Advantages

  • Wide input voltage range enables versatile applications.
  • High output current capability allows for powering multiple components simultaneously.
  • Excellent line and load regulation ensure stable output voltage under varying conditions.
  • Built-in thermal protection prevents overheating.

Disadvantages

  • Dropout voltage of 0.3V may limit its use in low-power applications.
  • Quiescent current of 100µA may not be suitable for ultra-low power devices.

Working Principles

The TSM1011ID operates based on a linear voltage regulation principle. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for changes in input voltage and load conditions.

Detailed Application Field Plans

The TSM1011ID finds application in various electronic devices, including but not limited to: - Power supplies - Battery-powered devices - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the TSM1011ID include: - LM1117 - LT1086 - ADP3339 - MCP1702

These alternatives can be considered based on specific requirements and compatibility with the target application.

Word count: 409 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät TSM1011ID :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of TSM1011ID in technical solutions:

Q1: What is TSM1011ID? A1: TSM1011ID is a specific integrated circuit (IC) used for power management applications.

Q2: What are the typical applications of TSM1011ID? A2: TSM1011ID is commonly used in various technical solutions such as battery-powered devices, portable electronics, and low-power systems.

Q3: What is the input voltage range of TSM1011ID? A3: The input voltage range of TSM1011ID typically varies from 2.5V to 16V.

Q4: What is the output voltage range of TSM1011ID? A4: The output voltage range of TSM1011ID can be adjusted from 0.8V to 6V.

Q5: Can TSM1011ID handle high current loads? A5: Yes, TSM1011ID has a maximum output current capability of up to 1A, making it suitable for powering various components.

Q6: Does TSM1011ID have built-in protection features? A6: Yes, TSM1011ID incorporates several protection features like overcurrent protection, thermal shutdown, and short-circuit protection.

Q7: Is TSM1011ID compatible with different types of batteries? A7: Yes, TSM1011ID is designed to work with various battery chemistries, including lithium-ion, nickel-metal hydride, and alkaline batteries.

Q8: Can TSM1011ID operate in low-power modes? A8: Yes, TSM1011ID offers low quiescent current consumption, enabling efficient operation in low-power or standby modes.

Q9: Does TSM1011ID support voltage regulation? A9: Yes, TSM1011ID incorporates a voltage regulation mechanism to maintain a stable output voltage even under varying input conditions.

Q10: Is TSM1011ID available in different package options? A10: Yes, TSM1011ID is available in various package options, including surface-mount packages like SO-8 and DFN-8.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of TSM1011ID.