TDK Corporation
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
NTCG163JX103DT1S
Näytä Yksityiskohdat DataSheets

NTCG163JX103DT1S

Product Overview

NTCG163JX103DT1S belongs to the category of NTC thermistors and is commonly used for temperature sensing and compensation in various electronic devices. These thermistors are known for their high sensitivity to temperature changes, compact size, and reliable performance. The package type for NTCG163JX103DT1S is 0603, and it is available in tape and reel packaging with a quantity of 5000 pieces per reel.

Specifications

  • Resistance Value: 10kΩ
  • Tolerance: ±5%
  • Operating Temperature Range: -40°C to 125°C
  • Thermal Time Constant: 7s (max)
  • Dielectric Strength: 500VAC

Detailed Pin Configuration

NTCG163JX103DT1S has two terminals, typically labeled as "1" and "2". Terminal 1 is the positive lead, while terminal 2 is the negative lead.

Functional Features

  • High sensitivity to temperature changes
  • Fast response time
  • Wide operating temperature range
  • Compact size for space-constrained applications

Advantages and Disadvantages

Advantages: - Precise temperature sensing - Compact and lightweight - Reliable performance over a wide temperature range

Disadvantages: - Limited accuracy compared to other temperature sensing technologies - Susceptible to self-heating effects at higher currents

Working Principles

NTCG163JX103DT1S operates based on the principle of negative temperature coefficient (NTC), where its resistance decreases as the temperature increases. This characteristic makes it suitable for temperature measurement and compensation in electronic circuits.

Detailed Application Field Plans

NTCG163JX103DT1S finds extensive use in various applications such as: - Battery management systems - HVAC systems - Consumer electronics - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to NTCG163JX103DT1S include: - NTCG163JF103DT1S - NTCG163JX104DT1S - NTCG163JX102DT1S - NTCG163JX105DT1S

This diverse range of alternatives allows for flexibility in selecting the most suitable NTC thermistor for specific application requirements.

This comprehensive entry provides an in-depth understanding of NTCG163JX103DT1S, covering its basic information, specifications, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät NTCG163JX103DT1S :n soveltamiseen teknisissä ratkaisuissa

  1. What is the NTCG163JX103DT1S used for?

    • The NTCG163JX103DT1S is a thermistor commonly used for temperature sensing and compensation in various technical solutions.

  2. What is the temperature range of NTCG163JX103DT1S?

    • The NTCG163JX103DT1S has a temperature range typically from -40°C to 125°C, making it suitable for a wide range of applications.

  3. How does NTCG163JX103DT1S work as a temperature sensor?

    • The NTCG163JX103DT1S operates based on the principle of resistance change with temperature, providing an accurate measurement of the surrounding temperature.

  4. What are the typical applications of NTCG163JX103DT1S in technical solutions?

    • The NTCG163JX103DT1S is commonly used in battery management systems, power supplies, automotive electronics, and industrial equipment for temperature monitoring and control.

  5. What is the accuracy of NTCG163JX103DT1S as a temperature sensor?

    • The NTCG163JX103DT1S offers high accuracy in temperature measurements, typically within a few degrees Celsius.

  6. How can NTCG163JX103DT1S be integrated into a circuit?

    • The NTCG163JX103DT1S can be easily integrated into a circuit as a voltage divider or in series with a resistor to form a temperature sensing network.

  7. What are the key specifications to consider when using NTCG163JX103DT1S in a design?

    • Key specifications to consider include resistance at room temperature, beta value, maximum power rating, and thermal time constant.

  8. Can NTCG163JX103DT1S be used in harsh environments?

    • Yes, the NTCG163JX103DT1S is designed to withstand harsh environmental conditions and is suitable for use in rugged applications.

  9. Are there any precautions to consider when using NTCG163JX103DT1S in a design?

    • It's important to ensure proper thermal management and avoid exceeding the maximum power rating to prevent damage to the thermistor.

  10. Where can I find detailed technical information about NTCG163JX103DT1S?

    • Detailed technical information, including datasheets and application notes, can be found on the manufacturer's website or through authorized distributors.