TE Connectivity Measurement Specialties
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
M3051-000005-500PG
Näytä Yksityiskohdat DataSheets

M3051-000005-500PG

Product Overview

  • Category: Integrated Circuit
  • Use: Signal Processing
  • Characteristics: High precision, low power consumption
  • Package: 16-pin DIP
  • Essence: Analog-to-Digital Converter (ADC)
  • Packaging/Quantity: Tube/50 pieces

Specifications

  • Resolution: 12-bit
  • Conversion Rate: 500 kSPS
  • Input Voltage Range: 0V to Vref
  • Power Supply: 2.7V to 5.25V
  • Operating Temperature: -40°C to 85°C

Detailed Pin Configuration

  1. VDD: Power Supply
  2. VREF: Reference Voltage Input
  3. AGND: Analog Ground
  4. IN+: Positive Analog Input
  5. IN-: Negative Analog Input
  6. REFOUT: Reference Output
  7. DOUT: Digital Output
  8. SCLK: Serial Clock Input
  9. DIN: Serial Data Input
  10. CS: Chip Select
  11. DGND: Digital Ground
  12. PD: Power Down
  13. CLKSEL: Clock Select
  14. OSR: Over-Sampling Ratio
  15. COM: Common Mode Voltage
  16. NC: No Connection

Functional Features

  • High-speed successive approximation ADC
  • Low power consumption
  • Internal reference and clock
  • SPI-compatible serial interface

Advantages and Disadvantages

Advantages: - High resolution - Wide input voltage range - Low power consumption

Disadvantages: - Limited operating temperature range - Requires external components for full functionality

Working Principles

The M3051-000005-500PG utilizes a successive approximation technique to convert analog signals into digital data. It employs an internal reference and clock to achieve high precision and speed while consuming minimal power.

Detailed Application Field Plans

This ADC is suitable for various applications including: - Industrial automation - Data acquisition systems - Instrumentation - Medical equipment

Detailed and Complete Alternative Models

  1. M3051-000003-300PG: 10-bit resolution, 300 kSPS
  2. M3051-000007-1000PG: 14-bit resolution, 1 MSPS
  3. M3051-000010-2000PG: 16-bit resolution, 2 MSPS

Note: The alternative models listed above are indicative and may not cover the entire range of available alternatives.

This comprehensive entry provides detailed information about the M3051-000005-500PG, covering its product details, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät M3051-000005-500PG :n soveltamiseen teknisissä ratkaisuissa

  1. What is M3051-000005-500PG?

    • M3051-000005-500PG is a specific model of pressure sensor used in various technical solutions.

  2. What are the key features of M3051-000005-500PG?

    • The key features of M3051-000005-500PG include high accuracy, wide operating temperature range, and compatibility with various media.

  3. How is M3051-000005-500PG typically used in technical solutions?

    • M3051-000005-500PG is commonly used for measuring and monitoring pressure in industrial processes, HVAC systems, and hydraulic applications.

  4. What is the operating range of M3051-000005-500PG?

    • The operating range of M3051-000005-500PG is typically from 0 to 500 psi, making it suitable for a wide range of applications.

  5. Is M3051-000005-500PG compatible with different types of fluids and gases?

    • Yes, M3051-000005-500PG is designed to be compatible with a variety of fluids and gases commonly found in industrial and technical environments.

  6. What are the output options available for M3051-000005-500PG?

    • M3051-000005-500PG typically offers analog voltage or current outputs, making it compatible with most control and monitoring systems.

  7. Can M3051-000005-500PG be integrated with digital communication protocols?

    • Yes, M3051-000005-500PG can often be integrated with digital communication protocols such as Modbus, HART, or Profibus for enhanced connectivity.

  8. What are the environmental considerations for installing M3051-000005-500PG?

    • M3051-000005-500PG is designed to withstand harsh environmental conditions, including temperature variations and exposure to moisture or dust.

  9. Are there any special installation requirements for M3051-000005-500PG?

    • It is important to follow the manufacturer's guidelines for proper mounting, sealing, and electrical connections when installing M3051-000005-500PG.

  10. How can M3051-000005-500PG be calibrated and maintained?

    • Calibration and maintenance procedures for M3051-000005-500PG should be performed according to the manufacturer's recommendations to ensure accurate and reliable performance.