Texas Instruments
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
74FCT2374CTSOCTG4
Näytä Yksityiskohdat DataSheets

Encyclopedia Entry: 74FCT2374CTSOCTG4

Product Information Overview

Category: Integrated Circuit (IC)

Use: The 74FCT2374CTSOCTG4 is a high-speed octal D-type flip-flop IC. It is commonly used in digital electronics for storing and transferring data in various applications.

Characteristics: This IC operates at high speeds, making it suitable for use in systems that require fast data transfer. It has eight individual D-type flip-flops with tri-state outputs, allowing for efficient data storage and retrieval. The IC is designed to work with a wide range of input and output voltage levels, making it versatile for different circuit designs.

Package: The 74FCT2374CTSOCTG4 is available in a small-outline integrated circuit (SOIC) package. This package provides a compact and space-saving solution for integrating the IC into electronic circuits.

Essence: The essence of the 74FCT2374CTSOCTG4 lies in its ability to store and transfer data efficiently. It simplifies the design of digital circuits by providing multiple flip-flops in a single IC package.

Packaging/Quantity: The 74FCT2374CTSOCTG4 is typically sold in reels or tubes containing multiple ICs. The exact quantity may vary depending on the supplier.

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • High-Speed Operation: Up to 250 MHz
  • Output Drive Capability: ±24 mA
  • Input Voltage Levels: TTL-compatible
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The 74FCT2374CTSOCTG4 has a total of 20 pins, which are assigned specific functions. Here is the detailed pin configuration:

  1. Pin 1: Output 1 (Q1)
  2. Pin 2: Output Enable 1 (OE1)
  3. Pin 3: Data Input 1 (D1)
  4. Pin 4: Clock Input (CLK)
  5. Pin 5: Ground (GND)
  6. Pin 6: Data Input 2 (D2)
  7. Pin 7: Output Enable 2 (OE2)
  8. Pin 8: Output 2 (Q2)
  9. Pin 9: Output 3 (Q3)
  10. Pin 10: Output Enable 3 (OE3)
  11. Pin 11: Data Input 3 (D3)
  12. Pin 12: VCC
  13. Pin 13: Output 4 (Q4)
  14. Pin 14: Output Enable 4 (OE4)
  15. Pin 15: Data Input 4 (D4)
  16. Pin 16: Output 5 (Q5)
  17. Pin 17: Output Enable 5 (OE5)
  18. Pin 18: Data Input 5 (D5)
  19. Pin 19: Output 6 (Q6)
  20. Pin 20: Output Enable 6 (OE6)

Functional Features

  • High-speed operation allows for efficient data transfer.
  • Tri-state outputs enable easy integration with other digital circuits.
  • Wide input and output voltage range make it compatible with various circuit designs.
  • Compact SOIC package provides space-saving integration.

Advantages and Disadvantages

Advantages: - High-speed operation enables fast data transfer. - Tri-state outputs allow for efficient data storage and retrieval. - Versatile compatibility with different voltage levels and circuit designs. - Compact package saves space in electronic circuits.

Disadvantages: - May not be suitable for applications requiring extremely low power consumption. - Limited number of flip-flops (8) in a single IC package.

Working Principles

The 74FCT2374CTSOCTG4 operates based on the principles of D-type flip-flops. It stores and transfers data using clock signals and input data. When the clock signal transitions from low to high, the input data is latched into the flip-flops and stored. The stored data can then be retrieved through the output pins. The tri-state outputs allow for efficient control of data flow within a circuit.

Detailed Application Field Plans

The 74FCT2374CTSOCTG4 finds applications in various digital systems, including but not limited to: - Data storage and retrieval systems - Communication systems - Microprocessor-based systems - Memory modules - Control systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the 74FCT2374CTSOCTG4 include: - 74HC374: High-speed octal D-type flip-flop IC with tri-state outputs. - SN74LS374: Octal D-type flip-flop IC with tri-state outputs and TTL

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät 74FCT2374CTSOCTG4 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of 74FCT2374CTSOCTG4 in technical solutions:

  1. Q: What is the 74FCT2374CTSOCTG4? A: The 74FCT2374CTSOCTG4 is a octal D-type flip-flop with tri-state outputs, commonly used in digital logic circuits.

  2. Q: What is the purpose of using the 74FCT2374CTSOCTG4 in technical solutions? A: The 74FCT2374CTSOCTG4 is used for storing and transferring data in sequential logic circuits, making it useful in applications such as memory systems, registers, and counters.

  3. Q: How many flip-flops are there in the 74FCT2374CTSOCTG4? A: The 74FCT2374CTSOCTG4 consists of eight individual D-type flip-flops.

  4. Q: What is the maximum operating frequency of the 74FCT2374CTSOCTG4? A: The maximum operating frequency of the 74FCT2374CTSOCTG4 is typically specified by the manufacturer and can vary, but it is generally in the range of several hundred megahertz.

  5. Q: What is the voltage supply range for the 74FCT2374CTSOCTG4? A: The 74FCT2374CTSOCTG4 typically operates with a voltage supply range of 4.5V to 5.5V.

  6. Q: Can the outputs of the 74FCT2374CTSOCTG4 be disabled? A: Yes, the outputs of the 74FCT2374CTSOCTG4 can be disabled by using the tri-state feature, which allows them to be put into a high-impedance state.

  7. Q: What is the propagation delay of the 74FCT2374CTSOCTG4? A: The propagation delay of the 74FCT2374CTSOCTG4 refers to the time it takes for a change in input to be reflected at the output. It is typically specified by the manufacturer and can vary depending on operating conditions.

  8. Q: Can the 74FCT2374CTSOCTG4 be cascaded with other flip-flops? A: Yes, the 74FCT2374CTSOCTG4 can be cascaded with other flip-flops to create larger registers or counters, allowing for more complex sequential logic circuits.

  9. Q: Are there any special considerations when designing with the 74FCT2374CTSOCTG4? A: When designing with the 74FCT2374CTSOCTG4, it is important to consider factors such as power supply decoupling, signal integrity, and noise immunity to ensure reliable operation.

  10. Q: Where can I find more information about the 74FCT2374CTSOCTG4? A: More detailed information about the 74FCT2374CTSOCTG4 can be found in its datasheet, which is typically provided by the manufacturer.