Texas Instruments
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
BQ20Z80DBTR-V102G4
Näytä Yksityiskohdat DataSheets

BQ20Z80DBTR-V102G4

Product Overview

Category

BQ20Z80DBTR-V102G4 belongs to the category of integrated circuits (ICs) specifically designed for battery management systems.

Use

This product is primarily used for monitoring and controlling the performance of rechargeable batteries in various applications, such as portable electronic devices, electric vehicles, and renewable energy systems.

Characteristics

  • Integrated circuit for battery management
  • Monitors battery voltage, current, temperature, and state of charge
  • Controls charging and discharging processes
  • Provides accurate battery information to the system
  • Supports communication protocols like I2C and SMBus

Package

BQ20Z80DBTR-V102G4 comes in a small form factor package known as Thin Shrink Small Outline Package (TSSOP). This package offers compactness and ease of integration into different electronic systems.

Essence

The essence of BQ20Z80DBTR-V102G4 lies in its ability to accurately monitor and control the performance of rechargeable batteries, ensuring optimal utilization and extending their lifespan.

Packaging/Quantity

This product is typically packaged in reels or tubes, containing a specific quantity of ICs per package. The exact packaging and quantity may vary depending on the manufacturer's specifications.

Specifications

  • Supply Voltage: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Communication Interface: I2C, SMBus
  • Battery Voltage Measurement Range: 0V to 5V
  • Battery Current Measurement Range: -10A to +10A
  • State of Charge Measurement Accuracy: ±1%
  • Cell Balancing Control: Yes
  • Overvoltage/Undervoltage Protection: Yes
  • Overcurrent Protection: Yes

Detailed Pin Configuration

The BQ20Z80DBTR-V102G4 IC has a total of 20 pins. The pin configuration is as follows:

  1. VSS - Ground
  2. SDA - I2C Data Line
  3. SCL - I2C Clock Line
  4. ALERT - Interrupt Output
  5. TS1 - Temperature Sense Input 1
  6. TS2 - Temperature Sense Input 2
  7. BAT - Battery Voltage Sense Input
  8. CC - Charge Current Sense Input
  9. VDD - Supply Voltage
  10. XALERT - External Alert Input
  11. DSG - Discharge FET Control Output
  12. CHG - Charge FET Control Output
  13. PACK+ - Positive Terminal of Battery Pack
  14. PACK- - Negative Terminal of Battery Pack
  15. THERM - Thermistor Input
  16. SRP - System Reset Output
  17. SRN - System Reset Output
  18. VSS - Ground
  19. VSS - Ground
  20. VSS - Ground

Functional Features

  • Accurate measurement and monitoring of battery voltage, current, temperature, and state of charge.
  • Cell balancing control to ensure uniform charging and discharging among battery cells.
  • Overvoltage and undervoltage protection to prevent damage to the battery.
  • Overcurrent protection to safeguard against excessive current flow.
  • Communication interface for seamless integration with the system.

Advantages and Disadvantages

Advantages

  • Precise battery monitoring and control for optimal performance.
  • Supports popular communication protocols for easy integration.
  • Compact package size for space-constrained applications.
  • Comprehensive protection features for enhanced safety.
  • Enables efficient utilization and extended lifespan of batteries.

Disadvantages

  • Limited compatibility with certain battery chemistries or configurations.
  • Requires proper configuration and calibration for accurate measurements.
  • Relies on external components for complete battery management system implementation.

Working Principles

BQ20Z80DBTR-V102G4 operates based on the principle of measuring various parameters of a rechargeable battery, such as voltage, current, and temperature. It utilizes internal algorithms to calculate the state of charge and control the charging and discharging processes. The IC communicates with the system controller through the I2C or SMBus interface, providing accurate battery information for efficient management.

Detailed Application Field Plans

BQ20Z80DBTR-V102G4 finds applications in a wide range of fields, including:

  1. Portable Electronic Devices: Enables precise battery monitoring and control in smartphones, tablets, laptops, and wearable devices.
  2. Electric Vehicles: Facilitates efficient battery management in electric cars, ensuring optimal performance and extending driving range.
  3. Renewable Energy Systems: Monitors and controls battery banks in solar power systems, wind turbines, and energy storage solutions.
  4. Medical Devices: Provides accurate battery information for critical medical equipment, ensuring reliable operation and patient safety.
  5. Industrial Equipment: Enables effective battery management in industrial machinery, backup power systems, and remote monitoring devices.

Detailed and Complete

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät BQ20Z80DBTR-V102G4 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of BQ20Z80DBTR-V102G4 in technical solutions:

  1. Question: What is the BQ20Z80DBTR-V102G4?
    Answer: The BQ20Z80DBTR-V102G4 is a battery fuel gauge and protection IC designed for use in portable electronic devices.

  2. Question: What is the purpose of the BQ20Z80DBTR-V102G4?
    Answer: The purpose of this IC is to accurately measure and monitor the battery capacity, voltage, and temperature, providing information for battery management and protection.

  3. Question: What types of devices can benefit from using the BQ20Z80DBTR-V102G4?
    Answer: This IC is commonly used in smartphones, tablets, laptops, power banks, and other portable electronic devices that rely on batteries.

  4. Question: How does the BQ20Z80DBTR-V102G4 measure battery capacity?
    Answer: It uses an advanced algorithm that takes into account factors such as charge and discharge rates, temperature, and aging effects to estimate the remaining battery capacity.

  5. Question: Can the BQ20Z80DBTR-V102G4 protect the battery from overcharging or over-discharging?
    Answer: Yes, it has built-in protection features that prevent overcharging, over-discharging, and excessive current flow, ensuring the safety and longevity of the battery.

  6. Question: Is the BQ20Z80DBTR-V102G4 compatible with different battery chemistries?
    Answer: Yes, it supports various battery chemistries such as lithium-ion (Li-ion), lithium-polymer (LiPo), and lithium iron phosphate (LiFePO4).

  7. Question: How accurate is the battery capacity estimation provided by the BQ20Z80DBTR-V102G4?
    Answer: The accuracy of the capacity estimation depends on various factors, but it typically provides a high level of accuracy within a reasonable margin of error.

  8. Question: Can the BQ20Z80DBTR-V102G4 communicate with a microcontroller or host system?
    Answer: Yes, it supports communication protocols such as I2C and SMBus, allowing it to interface with microcontrollers or host systems for data exchange and control.

  9. Question: Does the BQ20Z80DBTR-V102G4 have any built-in temperature sensing capabilities?
    Answer: Yes, it has an integrated temperature sensor that can measure the battery temperature, which is important for accurate capacity estimation and thermal management.

  10. Question: Are there any evaluation tools or development kits available for the BQ20Z80DBTR-V102G4?
    Answer: Yes, Texas Instruments provides evaluation modules and software development kits that can help developers integrate and test the BQ20Z80DBTR-V102G4 in their applications.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.