Texas Instruments
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
BUF07704AIPWP
Näytä Yksityiskohdat DataSheets

BUF07704AIPWP

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Buffer/Driver
  • Characteristics: High-speed, low-power, wide voltage range
  • Package: 20-pin TSSOP (Thin Shrink Small Outline Package)
  • Essence: Amplification and buffering of digital signals
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • Input Voltage Range: GND to VCC
  • Output Voltage Range: GND to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay Time: 2.3ns (typical)
  • Output Current: ±24mA
  • Input Capacitance: 4pF (typical)

Detailed Pin Configuration

The BUF07704AIPWP has a total of 20 pins. The pin configuration is as follows:

  1. OUT1
  2. OUT2
  3. OUT3
  4. OUT4
  5. OUT5
  6. OUT6
  7. OUT7
  8. OUT8
  9. VCC
  10. GND
  11. IN1
  12. IN2
  13. IN3
  14. IN4
  15. IN5
  16. IN6
  17. IN7
  18. IN8
  19. NC (No Connection)
  20. NC (No Connection)

Functional Features

  • High-speed signal amplification and buffering
  • Wide voltage range compatibility
  • Low power consumption
  • High output current capability
  • Protection against overvoltage and short circuits

Advantages and Disadvantages

Advantages: - Fast propagation delay time for quick signal processing - Wide supply voltage range allows for versatile applications - Low power consumption for energy-efficient designs - High output current capability enables driving of various loads

Disadvantages: - Limited number of input and output channels (8 in total) - Relatively small input capacitance may limit certain applications

Working Principles

The BUF07704AIPWP is designed to amplify and buffer digital signals. It operates by receiving digital input signals through the IN1 to IN8 pins. These signals are then amplified and buffered internally before being outputted through the OUT1 to OUT8 pins. The device ensures fast signal propagation with minimal delay, making it suitable for high-speed applications.

Detailed Application Field Plans

The BUF07704AIPWP can be used in various applications that require signal buffering and amplification. Some potential application fields include:

  1. Communication systems
  2. Data transmission equipment
  3. Industrial automation
  4. Test and measurement instruments
  5. Audio and video processing devices

Detailed and Complete Alternative Models

  1. SN74LVC244A: Octal Buffer/Driver with 3-State Outputs
  2. MC74VHC1GT125: Single Buffer/Driver with 3-State Output
  3. CD74HCT541: Octal Buffer/Line Driver with 3-State Outputs
  4. LTC4317: I2C/SMBus Buffer with Stuck Bus Recovery

These alternative models offer similar functionality and can be considered as alternatives to the BUF07704AIPWP depending on specific requirements.

Word count: 342 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät BUF07704AIPWP :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of BUF07704AIPWP in technical solutions:

  1. Question: What is BUF07704AIPWP?
    Answer: BUF07704AIPWP is a specific integrated circuit (IC) that functions as a buffer or level shifter in electronic circuits.

  2. Question: What is the purpose of using BUF07704AIPWP in technical solutions?
    Answer: The purpose of using BUF07704AIPWP is to provide voltage level shifting, buffering, and signal isolation capabilities in various electronic applications.

  3. Question: What voltage levels can BUF07704AIPWP support?
    Answer: BUF07704AIPWP can support voltage levels ranging from 1.65V to 5.5V.

  4. Question: Can BUF07704AIPWP be used for bidirectional level shifting?
    Answer: Yes, BUF07704AIPWP supports bidirectional level shifting, allowing signals to be shifted from one voltage level to another in both directions.

  5. Question: What is the maximum data rate supported by BUF07704AIPWP?
    Answer: BUF07704AIPWP can support data rates up to 100 Mbps.

  6. Question: Is BUF07704AIPWP suitable for use in high-speed digital interfaces?
    Answer: Yes, BUF07704AIPWP is suitable for use in high-speed digital interfaces such as I2C, SPI, UART, and GPIO.

  7. Question: Can BUF07704AIPWP handle multiple input/output channels?
    Answer: Yes, BUF07704AIPWP has four independent input/output channels, making it suitable for applications requiring multiple signal conversions.

  8. Question: Does BUF07704AIPWP require external components for operation?
    Answer: BUF07704AIPWP requires minimal external components, such as decoupling capacitors, for proper operation.

  9. Question: What is the operating temperature range of BUF07704AIPWP?
    Answer: BUF07704AIPWP can operate within a temperature range of -40°C to +125°C.

  10. Question: Can BUF07704AIPWP be used in automotive applications?
    Answer: Yes, BUF07704AIPWP is qualified for automotive applications and meets the necessary standards and requirements.

Please note that these questions and answers are general and may vary depending on specific application requirements.