Texas Instruments
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
CY74FCT480BTSOCTG4
Näytä Yksityiskohdat DataSheets

CY74FCT480BTSOCTG4

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Logic Buffer/Driver
  • Characteristics: High-speed, low-power, octal buffer/driver
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Provides buffering and driving capabilities for digital signals
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Supply Voltage: 4.5V to 5.5V
  • Input Voltage: 0V to VCC
  • Output Voltage: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Output Current: ±24mA
  • Propagation Delay Time: 3.8ns (typical)

Detailed Pin Configuration

The CY74FCT480BTSOCTG4 has a total of 20 pins. The pin configuration is as follows:

  1. OE (Output Enable)
  2. A0 (Input A0)
  3. A1 (Input A1)
  4. A2 (Input A2)
  5. A3 (Input A3)
  6. A4 (Input A4)
  7. A5 (Input A5)
  8. GND (Ground)
  9. Y0 (Output Y0)
  10. Y1 (Output Y1)
  11. Y2 (Output Y2)
  12. Y3 (Output Y3)
  13. Y4 (Output Y4)
  14. Y5 (Output Y5)
  15. Y6 (Output Y6)
  16. Y7 (Output Y7)
  17. VCC (Supply Voltage)
  18. NC (No Connection)
  19. NC (No Connection)
  20. OE (Output Enable)

Functional Features

  • Octal buffer/driver with tri-state outputs
  • High-speed operation with low power consumption
  • Provides non-inverting buffering and driving capabilities for digital signals
  • Output enable (OE) pin allows for control of the output state

Advantages and Disadvantages

Advantages: - High-speed operation enables efficient signal buffering and driving - Low-power consumption helps in reducing overall system power requirements - Tri-state outputs allow for flexible control of the output state

Disadvantages: - Limited output current may not be suitable for high-current applications - Operating temperature range may restrict usage in extreme environments

Working Principles

The CY74FCT480BTSOCTG4 is designed to buffer and drive digital signals. It operates by receiving input signals on the A0-A5 pins and providing corresponding buffered outputs on the Y0-Y7 pins. The output enable (OE) pin controls the output state, allowing the user to enable or disable the outputs as needed.

Detailed Application Field Plans

The CY74FCT480BTSOCTG4 can be used in various applications that require buffering and driving of digital signals. Some potential application fields include: - Microprocessor-based systems - Data communication systems - Industrial automation - Test and measurement equipment - Consumer electronics

Detailed and Complete Alternative Models

  • SN74FCT480: Similar octal buffer/driver IC from Texas Instruments
  • MC74FCT480: Octal buffer/driver IC from ON Semiconductor
  • CD74FCT480: Octal buffer/driver IC from Texas Instruments

Note: This list is not exhaustive and there are other alternative models available from different manufacturers.

Word count: 345 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät CY74FCT480BTSOCTG4 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of CY74FCT480BTSOCTG4 in technical solutions:

  1. Q: What is the CY74FCT480BTSOCTG4? A: The CY74FCT480BTSOCTG4 is a high-speed, low-power octal bus transceiver with configurable voltage translation capabilities.

  2. Q: What is the voltage range supported by CY74FCT480BTSOCTG4? A: The CY74FCT480BTSOCTG4 supports voltage translation between 3.3V and 5V systems.

  3. Q: How many bidirectional channels does CY74FCT480BTSOCTG4 have? A: The CY74FCT480BTSOCTG4 has 8 bidirectional channels.

  4. Q: What is the maximum data rate supported by CY74FCT480BTSOCTG4? A: The CY74FCT480BTSOCTG4 supports data rates up to 250 Mbps.

  5. Q: Can CY74FCT480BTSOCTG4 be used for level shifting between different logic families? A: Yes, CY74FCT480BTSOCTG4 can be used for level shifting between TTL and CMOS logic families.

  6. Q: Does CY74FCT480BTSOCTG4 support hot insertion? A: Yes, CY74FCT480BTSOCTG4 supports hot insertion, allowing it to be inserted or removed from a live circuit without causing damage.

  7. Q: What is the power supply voltage range for CY74FCT480BTSOCTG4? A: The power supply voltage range for CY74FCT480BTSOCTG4 is typically between 4.5V and 5.5V.

  8. Q: Can CY74FCT480BTSOCTG4 be used in high-speed data communication applications? A: Yes, CY74FCT480BTSOCTG4 is suitable for high-speed data communication applications such as networking and telecommunications.

  9. Q: Does CY74FCT480BTSOCTG4 have built-in ESD protection? A: Yes, CY74FCT480BTSOCTG4 has built-in ESD protection to safeguard against electrostatic discharge events.

  10. Q: What package options are available for CY74FCT480BTSOCTG4? A: CY74FCT480BTSOCTG4 is available in various package options, including SOIC and TSSOP, to accommodate different PCB layouts and assembly processes.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.