Texas Instruments
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
DS90CR483VJD
Näytä Yksityiskohdat DataSheets

DS90CR483VJD

Product Overview

  • Category: Integrated Circuit
  • Use: Video Serializer/Deserializer
  • Characteristics: High-speed, low-power, compact size
  • Package: 56-pin TSSOP
  • Essence: Converts parallel video data to serial and vice versa
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Supply Voltage: 3.3V
  • Operating Temperature: -40°C to +85°C
  • Data Rate: Up to 1.6 Gbps
  • Supported Video Formats: RGB, YCbCr, VGA, SVGA, XGA, SXGA, UXGA
  • Input/Output Interface: LVDS (Low-Voltage Differential Signaling)
  • Power Consumption: 100mW (typical)

Pin Configuration

The DS90CR483VJD has a total of 56 pins. The pin configuration is as follows:

  1. VCC
  2. VCC
  3. VCC
  4. GND
  5. GND
  6. GND
  7. GND
  8. GND
  9. GND
  10. GND
  11. GND
  12. GND
  13. GND
  14. GND
  15. GND
  16. GND
  17. GND
  18. GND
  19. GND
  20. GND
  21. GND
  22. GND
  23. GND
  24. GND
  25. GND
  26. GND
  27. GND
  28. GND
  29. GND
  30. GND
  31. GND
  32. GND
  33. GND
  34. GND
  35. GND
  36. GND
  37. GND
  38. GND
  39. GND
  40. GND
  41. GND
  42. GND
  43. GND
  44. GND
  45. GND
  46. GND
  47. GND
  48. GND
  49. GND
  50. GND
  51. GND
  52. GND
  53. GND
  54. GND
  55. GND
  56. GND

Functional Features

  • Converts parallel video data to serial and vice versa
  • Supports various video formats including RGB, YCbCr, VGA, SVGA, XGA, SXGA, UXGA
  • High-speed data transmission up to 1.6 Gbps
  • Low-power consumption of only 100mW
  • LVDS interface for reliable signal transmission
  • Compact size for space-constrained applications

Advantages and Disadvantages

Advantages: - High-speed data transmission - Low-power consumption - Wide range of supported video formats - Reliable signal transmission through LVDS interface - Compact size for space-constrained applications

Disadvantages: - Limited pin configuration options - Requires additional components for complete video processing

Working Principles

The DS90CR483VJD operates by converting parallel video data into a serial format using LVDS signaling. It accepts input from a parallel video source and converts it into a high-speed serial stream. On the receiving end, it takes the serial stream and converts it back into parallel video data. This conversion allows for efficient transmission of video data over longer distances while maintaining high quality.

Application Field Plans

The DS90CR483VJD is commonly used in various applications that require the transmission of high-resolution video signals over long distances. Some of the specific application fields include:

  1. Medical Imaging Systems
  2. Industrial Automation
  3. Digital Signage
  4. Surveillance Systems
  5. Automotive Infotainment

Alternative Models

For users seeking alternative options, the following models can be considered:

  1. DS90CR481VJD
  2. DS90CR482VJD
  3. DS90CR484VJD
  4. DS90CR485VJD

These models offer similar functionality and characteristics to the DS90CR483VJD, providing flexibility in choosing the most suitable solution for specific requirements.

Word count: 346 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät DS90CR483VJD :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of DS90CR483VJD in technical solutions:

  1. Q: What is DS90CR483VJD? A: DS90CR483VJD is a serializer/deserializer (SerDes) chip commonly used for high-speed data transmission over long distances.

  2. Q: What is the maximum data rate supported by DS90CR483VJD? A: DS90CR483VJD supports a maximum data rate of 1.6 Gbps.

  3. Q: What is the typical application of DS90CR483VJD? A: DS90CR483VJD is often used in video surveillance systems, medical imaging devices, automotive infotainment systems, and other applications requiring long-distance data transmission.

  4. Q: Can DS90CR483VJD be used for both transmitting and receiving data? A: Yes, DS90CR483VJD can be used as both a transmitter and a receiver, making it suitable for bidirectional communication.

  5. Q: What is the maximum cable length supported by DS90CR483VJD? A: The maximum cable length depends on various factors such as cable quality and data rate. However, DS90CR483VJD can support cable lengths up to several hundred meters.

  6. Q: Does DS90CR483VJD require any external components for operation? A: Yes, DS90CR483VJD requires external power supply, clock source, and termination resistors for proper operation.

  7. Q: Can DS90CR483VJD be cascaded with other SerDes chips? A: Yes, DS90CR483VJD can be cascaded with other SerDes chips to extend the data transmission distance or increase the number of channels.

  8. Q: What is the power supply voltage range for DS90CR483VJD? A: DS90CR483VJD operates with a power supply voltage range of 3.3V ±10%.

  9. Q: Does DS90CR483VJD support any error detection or correction mechanisms? A: Yes, DS90CR483VJD supports embedded clock data recovery (CDR) and 8b/10b encoding/decoding to ensure reliable data transmission.

  10. Q: Is DS90CR483VJD compatible with other common interface standards? A: Yes, DS90CR483VJD is compatible with various interface standards such as LVDS, FPD-Link, and others, making it versatile for integration into different systems.

Please note that these answers are general and may vary depending on specific implementation details and requirements.