Texas Instruments
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
REF5010IDGKT
Näytä Yksityiskohdat DataSheets

REF5010IDGKT

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Reference

Characteristics: - High precision voltage reference - Low temperature coefficient - Wide operating range - Low dropout voltage - Low output noise - High output current capability

Package: DGK (8-pin VSSOP)

Essence: The REF5010IDGKT is a high-performance voltage reference IC that provides a stable and accurate voltage output.

Packaging/Quantity: The REF5010IDGKT is available in tape and reel packaging, with 2500 units per reel.

Specifications

  • Output Voltage Range: 1.225V to 5.5V
  • Initial Accuracy: ±0.05%
  • Temperature Coefficient: 10ppm/°C
  • Dropout Voltage: 200mV
  • Output Current: 10mA
  • Quiescent Current: 50µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The REF5010IDGKT has the following pin configuration:

  1. VOUT: Output Voltage
  2. GND: Ground
  3. NC: No Connection
  4. NC: No Connection
  5. NC: No Connection
  6. NC: No Connection
  7. VIN: Input Voltage
  8. NC: No Connection

Functional Features

  • High precision: The REF5010IDGKT offers excellent initial accuracy and low temperature coefficient, ensuring precise voltage references.
  • Wide operating range: It operates over a wide temperature range, making it suitable for various applications.
  • Low dropout voltage: The low dropout voltage enables efficient operation even with low input voltages.
  • Low output noise: It produces minimal output noise, resulting in clean and stable voltage references.
  • High output current capability: With a maximum output current of 10mA, it can drive various loads effectively.

Advantages and Disadvantages

Advantages: - High precision and accuracy - Wide operating temperature range - Low dropout voltage - Low output noise - High output current capability

Disadvantages: - Limited output current capacity (10mA)

Working Principles

The REF5010IDGKT utilizes a bandgap voltage reference circuit to generate a stable and accurate voltage output. It compensates for temperature variations by employing a temperature-dependent current source and a voltage divider network. This ensures that the output voltage remains constant over a wide temperature range.

Detailed Application Field Plans

The REF5010IDGKT is commonly used in applications that require precise voltage references, such as: - Analog-to-Digital Converters (ADCs) - Digital-to-Analog Converters (DACs) - Voltage regulators - Precision measurement equipment - Sensor calibration circuits - Battery management systems

Detailed and Complete Alternative Models

  1. REF5020IDGKT: Similar to REF5010IDGKT but with a higher output current capability of 20mA.
  2. REF5030IDGKT: Similar to REF5010IDGKT but with a higher output current capability of 30mA.
  3. REF5040IDGKT: Similar to REF5010IDGKT but with a higher output current capability of 40mA.
  4. REF5050IDGKT: Similar to REF5010IDGKT but with a higher output current capability of 50mA.

These alternative models provide options with increased output current capacity for applications that require higher load driving capabilities.

Word count: 400 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät REF5010IDGKT :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of REF5010IDGKT in technical solutions:

  1. Question: What is REF5010IDGKT?
    Answer: REF5010IDGKT is a voltage reference IC (integrated circuit) manufactured by Texas Instruments.

  2. Question: What is the purpose of REF5010IDGKT?
    Answer: REF5010IDGKT is designed to provide a stable and accurate voltage reference for various applications.

  3. Question: What is the voltage output range of REF5010IDGKT?
    Answer: The voltage output range of REF5010IDGKT is typically between 2.048V and 5V.

  4. Question: What is the accuracy of REF5010IDGKT?
    Answer: REF5010IDGKT has a high initial accuracy of ±0.05% and a low temperature coefficient of ±10ppm/°C.

  5. Question: Can REF5010IDGKT be used in precision measurement applications?
    Answer: Yes, REF5010IDGKT is suitable for precision measurement applications due to its high accuracy and low temperature coefficient.

  6. Question: Is REF5010IDGKT a low-power device?
    Answer: Yes, REF5010IDGKT operates at a low quiescent current of typically 60µA, making it suitable for battery-powered applications.

  7. Question: Can REF5010IDGKT operate over a wide temperature range?
    Answer: Yes, REF5010IDGKT can operate reliably over a temperature range of -40°C to +125°C.

  8. Question: Does REF5010IDGKT require external components for operation?
    Answer: Yes, REF5010IDGKT requires an external bypass capacitor for stability and noise reduction.

  9. Question: Can REF5010IDGKT be used in both analog and digital circuits?
    Answer: Yes, REF5010IDGKT can be used in a wide range of applications, including both analog and digital circuits.

  10. Question: Is REF5010IDGKT available in different package options?
    Answer: Yes, REF5010IDGKT is available in various package options, such as the 8-pin VSSOP and SOIC packages, providing flexibility in design and integration.

Please note that the answers provided here are general and may vary depending on specific application requirements.