Texas Instruments
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
SN65LVDS86AQDGGG4
Näytä Yksityiskohdat DataSheets

SN65LVDS86AQDGGG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: LVDS Serializer/Deserializer
  • Characteristics: High-speed data transmission, low power consumption
  • Package: VQFN-48
  • Essence: Converts parallel data to serial data and vice versa using Low Voltage Differential Signaling (LVDS) technology
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Data Rate: Up to 400 Mbps
  • Number of Channels: 10
  • Input/Output Interface: LVCMOS/LVTTL to LVDS
  • Package Dimensions: 7mm x 7mm

Pin Configuration

The SN65LVDS86AQDGGG4 has a total of 48 pins. The pin configuration is as follows:

  1. VCCO1
  2. GND
  3. RIN0P
  4. RIN0N
  5. ROUT0N
  6. ROUT0P
  7. RIN1P
  8. RIN1N
  9. ROUT1N
  10. ROUT1P
  11. RIN2P
  12. RIN2N
  13. ROUT2N
  14. ROUT2P
  15. RIN3P
  16. RIN3N
  17. ROUT3N
  18. ROUT3P
  19. RIN4P
  20. RIN4N
  21. ROUT4N
  22. ROUT4P
  23. RIN5P
  24. RIN5N
  25. ROUT5N
  26. ROUT5P
  27. RIN6P
  28. RIN6N
  29. ROUT6N
  30. ROUT6P
  31. RIN7P
  32. RIN7N
  33. ROUT7N
  34. ROUT7P
  35. RIN8P
  36. RIN8N
  37. ROUT8N
  38. ROUT8P
  39. RIN9P
  40. RIN9N
  41. ROUT9N
  42. ROUT9P
  43. VCCO2
  44. GND
  45. LVDSCLKOUTN
  46. LVDSCLKOUTP
  47. LVDSCLKINN
  48. LVDSCLKINP

Functional Features

  • Converts parallel data to serial data and vice versa
  • Uses LVDS technology for high-speed data transmission
  • Supports up to 400 Mbps data rate
  • Low power consumption
  • Provides differential signaling for noise immunity

Advantages and Disadvantages

Advantages: - High-speed data transmission capability - Low power consumption - Noise immunity due to differential signaling

Disadvantages: - Limited number of channels (10 in this case) - Requires LVCMOS/LVTTL interface for input/output

Working Principles

The SN65LVDS86AQDGGG4 is a LVDS Serializer/Deserializer IC that converts parallel data to serial data and vice versa. It uses LVDS technology, which employs differential signaling to transmit data at high speeds while consuming low power. The IC takes parallel data as input and converts it into a serial LVDS stream for transmission. On the receiving end, it receives the serial LVDS data and converts it back into parallel data.

Detailed Application Field Plans

The SN65LVDS86AQDGGG4 is commonly used in applications that require high-speed data transmission with low power consumption. Some of the typical application fields include:

  1. Display Systems: Used in LCD monitors, TVs, and digital signage for transmitting video data from the source to the display panel.
  2. Imaging Systems: Employed in cameras and medical imaging devices for transmitting image data from the sensor to the processing unit.
  3. Communication Systems: Used in high-speed communication interfaces such as Gigabit Ethernet, USB 3.0, and HDMI for data transmission between devices.

Detailed and Complete Alternative Models

  • SN65LVDS86AQDGGR
  • SN65LVDS86AQDGGT
  • SN65LVDS86AQDGGZ
  • SN65LVDS86AQDGGZR

These alternative models offer similar functionality and specifications to the SN65LVDS86AQDGGG4 and can be used as replacements depending on specific requirements.

Word count: 452

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät SN65LVDS86AQDGGG4 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of SN65LVDS86AQDGGG4 in technical solutions:

  1. Q: What is SN65LVDS86AQDGGG4? A: SN65LVDS86AQDGGG4 is a high-speed differential line driver and receiver designed for applications that require high data rates and low power consumption.

  2. Q: What is the operating voltage range of SN65LVDS86AQDGGG4? A: The operating voltage range of SN65LVDS86AQDGGG4 is typically between 3.0V and 3.6V.

  3. Q: What is the maximum data rate supported by SN65LVDS86AQDGGG4? A: SN65LVDS86AQDGGG4 supports a maximum data rate of up to 400 Mbps.

  4. Q: Can SN65LVDS86AQDGGG4 be used for long-distance communication? A: Yes, SN65LVDS86AQDGGG4 is suitable for long-distance communication as it provides robust differential signaling and noise immunity.

  5. Q: What is the output swing capability of SN65LVDS86AQDGGG4? A: SN65LVDS86AQDGGG4 has an output swing capability of ±350mV, making it compatible with various receiving devices.

  6. Q: Does SN65LVDS86AQDGGG4 support hot-plugging? A: Yes, SN65LVDS86AQDGGG4 supports hot-plugging, allowing for easy connection and disconnection of devices without causing damage.

  7. Q: Can SN65LVDS86AQDGGG4 be used in automotive applications? A: Yes, SN65LVDS86AQDGGG4 is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification.

  8. Q: What is the power consumption of SN65LVDS86AQDGGG4? A: SN65LVDS86AQDGGG4 has low power consumption, typically around 10mW.

  9. Q: Is SN65LVDS86AQDGGG4 compatible with other LVDS devices? A: Yes, SN65LVDS86AQDGGG4 is compatible with other LVDS devices, allowing for easy integration into existing systems.

  10. Q: What are some typical applications of SN65LVDS86AQDGGG4? A: SN65LVDS86AQDGGG4 is commonly used in applications such as high-speed data transmission, video interfaces, LCD panels, and industrial automation.

Please note that these answers are general and may vary depending on specific application requirements and conditions.