Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
SN74AUCH32374ZKER

SN74AUCH32374ZKER

Product Overview

  • Category: Integrated Circuit
  • Use: Data Storage and Transfer
  • Characteristics: High-speed, Low-power, 32-bit D-type Flip-Flop with 3-State Outputs
  • Package: 48-pin BGA (Ball Grid Array)
  • Essence: Reliable and efficient data storage and transfer solution
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Supply Voltage Range: 1.65V to 3.6V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Clock Frequency: 200 MHz
  • Maximum Data Rate: 400 Mbps
  • Number of Flip-Flops: 32
  • Output Drive Strength: ±24 mA

Detailed Pin Configuration

The SN74AUCH32374ZKER has a total of 48 pins. The pin configuration is as follows:

  1. GND
  2. Q0
  3. Q1
  4. Q2
  5. Q3
  6. Q4
  7. Q5
  8. Q6
  9. Q7
  10. Q8
  11. Q9
  12. Q10
  13. Q11
  14. Q12
  15. Q13
  16. Q14
  17. Q15
  18. Q16
  19. Q17
  20. Q18
  21. Q19
  22. Q20
  23. Q21
  24. Q22
  25. Q23
  26. Q24
  27. Q25
  28. Q26
  29. Q27
  30. Q28
  31. Q29
  32. Q30
  33. Q31
  34. OE#
  35. D0
  36. D1
  37. D2
  38. D3
  39. D4
  40. D5
  41. D6
  42. D7
  43. D8
  44. D9
  45. D10
  46. D11
  47. VCC
  48. GND

Functional Features

  • High-speed operation allows for efficient data transfer.
  • Low-power consumption ensures energy efficiency.
  • 3-state outputs provide flexibility in connecting multiple devices.
  • 32-bit D-type flip-flops enable reliable storage and retrieval of data.

Advantages and Disadvantages

Advantages: - High-speed operation enables fast data transfer. - Low-power consumption reduces energy usage. - 3-state outputs allow for flexible device connections. - Reliable data storage and retrieval with 32-bit flip-flops.

Disadvantages: - Limited to a maximum clock frequency of 200 MHz. - May not be suitable for applications requiring higher data rates.

Working Principles

The SN74AUCH32374ZKER operates by storing and transferring data using its 32-bit D-type flip-flops. The input data is latched on the rising edge of the clock signal, and the stored data can be accessed through the output pins. The 3-state outputs provide the ability to disconnect the device from the bus, allowing other devices to take control of the data lines.

Detailed Application Field Plans

The SN74AUCH32374ZKER is commonly used in various applications that require reliable data storage and transfer. Some of the potential application fields include:

  1. Communication Systems: Used in networking equipment, routers, and switches for efficient data handling.
  2. Industrial Automation: Employed in control systems, PLCs (Programmable Logic Controllers), and data acquisition systems.
  3. Automotive Electronics: Integrated into automotive control units, infotainment systems, and vehicle communication networks.
  4. Consumer Electronics: Utilized in smartphones, tablets, gaming consoles, and other portable devices for data processing and storage.

Detailed and Complete Alternative Models

  1. SN74AUCH32374ZKFR
  2. SN74AUCH32374ZKET
  3. SN74AUCH32374ZKEU
  4. SN74AUCH32374ZKEV
  5. SN74AUCH32374ZKEW

These alternative models offer similar functionality and characteristics to the SN74AUCH32374ZKER, providing options for different package types or temperature ranges.

Word count: 511 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät SN74AUCH32374ZKER :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of SN74AUCH32374ZKER in technical solutions:

  1. Q: What is the SN74AUCH32374ZKER? A: The SN74AUCH32374ZKER is a specific model of octal D-type flip-flop with 3-state outputs, designed for use in various technical applications.

  2. Q: What are the key features of SN74AUCH32374ZKER? A: Some key features include 8-bit transparent D-type latch, 3-state outputs, low power consumption, wide operating voltage range, and compatibility with various logic families.

  3. Q: What is the maximum operating frequency of SN74AUCH32374ZKER? A: The maximum operating frequency of SN74AUCH32374ZKER is typically around several hundred megahertz (MHz), depending on the specific conditions and setup.

  4. Q: Can SN74AUCH32374ZKER be used in both digital and analog circuits? A: No, SN74AUCH32374ZKER is primarily designed for digital circuits and may not be suitable for direct use in analog applications.

  5. Q: What is the recommended power supply voltage for SN74AUCH32374ZKER? A: The recommended power supply voltage for SN74AUCH32374ZKER is typically between 1.65V and 3.6V, as specified in the datasheet.

  6. Q: How many output pins does SN74AUCH32374ZKER have? A: SN74AUCH32374ZKER has a total of 8 output pins, corresponding to the 8 flip-flops within the chip.

  7. Q: Can SN74AUCH32374ZKER be cascaded to increase the number of flip-flops? A: Yes, SN74AUCH32374ZKER can be cascaded with other similar devices to increase the number of flip-flops in a circuit.

  8. Q: What is the typical propagation delay of SN74AUCH32374ZKER? A: The typical propagation delay of SN74AUCH32374ZKER is around several nanoseconds (ns), depending on the specific conditions and load capacitance.

  9. Q: Is SN74AUCH32374ZKER suitable for high-speed applications? A: Yes, SN74AUCH32374ZKER is designed to operate at relatively high speeds and can be used in various high-speed digital systems.

  10. Q: Can SN74AUCH32374ZKER tolerate electrostatic discharge (ESD)? A: Yes, SN74AUCH32374ZKER is designed to have ESD protection measures, making it more robust against electrostatic discharge events.

Please note that these answers are general and may vary based on the specific datasheet and application requirements.