SN74CB3Q16211GQLR
Product Overview
Category
SN74CB3Q16211GQLR belongs to the category of integrated circuits (ICs).
Use
This product is commonly used in electronic devices for signal switching and routing applications.
Characteristics
- Low power consumption
- High-speed operation
- Wide operating voltage range
- Compact size
- RoHS compliant
Package
SN74CB3Q16211GQLR is available in a small form factor package, typically a quad flat no-lead (QFN) package.
Essence
The essence of SN74CB3Q16211GQLR lies in its ability to efficiently switch and route signals within electronic systems, ensuring reliable data transmission.
Packaging/Quantity
SN74CB3Q16211GQLR is usually packaged in reels or tubes, with a typical quantity of 2500 units per reel/tube.
Specifications
- Number of channels: 16
- Input/output voltage range: 1.65V to 5.5V
- Operating temperature range: -40°C to 85°C
- On-state resistance: 4 ohms (typical)
- Maximum propagation delay: 2.5 ns (typical)
Detailed Pin Configuration
The pin configuration of SN74CB3Q16211GQLR is as follows:
Pin 1: VCC
Pin 2: Channel 1 Input/Output
Pin 3: Channel 2 Input/Output
...
Pin 49: Channel 16 Input/Output
Pin 50: GND
Functional Features
- Bidirectional signal switching
- Low on-state resistance
- ESD protection
- Overvoltage tolerance
- Hot insertion capability
Advantages and Disadvantages
Advantages
- Low power consumption
- High-speed operation
- Wide operating voltage range
- Compact size
- RoHS compliant
Disadvantages
- Limited number of channels (16)
- Relatively high on-state resistance compared to some alternatives
Working Principles
SN74CB3Q16211GQLR utilizes advanced semiconductor technology to enable bidirectional signal switching. It employs a combination of MOSFETs and control circuitry to ensure efficient and reliable signal routing.
Detailed Application Field Plans
SN74CB3Q16211GQLR finds applications in various electronic systems, including but not limited to: - Data communication devices - Networking equipment - Test and measurement instruments - Consumer electronics - Industrial automation systems
Detailed and Complete Alternative Models
- SN74CB3Q3257GQLR: 32-channel bidirectional switch with lower on-state resistance.
- SN74CB3T3306DCTR: 8-channel unidirectional switch with integrated level translation.
- SN74CBTLV3125PWR: 4-channel bus switch with hot insertion capability.
These alternative models offer different channel counts, improved performance, or additional features, providing flexibility for various design requirements.
Note: The above information is subject to change. Please refer to the product datasheet for the most up-to-date specifications and details.
Word count: 470 words
Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät SN74CB3Q16211GQLR :n soveltamiseen teknisissä ratkaisuissa
Sure! Here are 10 common questions and answers related to the application of SN74CB3Q16211GQLR in technical solutions:
Question: What is SN74CB3Q16211GQLR?
- Answer: SN74CB3Q16211GQLR is a specific model of a high-bandwidth, low-voltage, 12-bit configurable dual-supply translating transceiver.Question: What are the key features of SN74CB3Q16211GQLR?
- Answer: Some key features include wide voltage translation range, bidirectional data flow, low power consumption, and configurable I/O voltage levels.Question: What is the voltage translation range supported by SN74CB3Q16211GQLR?
- Answer: SN74CB3Q16211GQLR supports voltage translation from 1.2V to 3.6V on both sides.Question: Can SN74CB3Q16211GQLR be used for bidirectional communication?
- Answer: Yes, SN74CB3Q16211GQLR supports bidirectional data flow, making it suitable for applications requiring communication in both directions.Question: How much power does SN74CB3Q16211GQLR consume?
- Answer: SN74CB3Q16211GQLR has low power consumption, typically drawing around 5µA of current.Question: Can I configure the I/O voltage levels of SN74CB3Q16211GQLR?
- Answer: Yes, SN74CB3Q16211GQLR allows you to configure the I/O voltage levels using external resistors.Question: What is the maximum data rate supported by SN74CB3Q16211GQLR?
- Answer: SN74CB3Q16211GQLR can support data rates up to 100Mbps.Question: Is SN74CB3Q16211GQLR suitable for battery-powered applications?
- Answer: Yes, SN74CB3Q16211GQLR is designed for low-voltage operation and has low power consumption, making it suitable for battery-powered applications.Question: Can I use SN74CB3Q16211GQLR in industrial environments?
- Answer: Yes, SN74CB3Q16211GQLR is designed to operate reliably in industrial temperature ranges (-40°C to 85°C) and is suitable for industrial applications.Question: What are some typical applications of SN74CB3Q16211GQLR?
- Answer: SN74CB3Q16211GQLR can be used in various applications such as level shifting, voltage translation, bus interfacing, and general-purpose digital logic signal switching.
Please note that the answers provided here are general and may vary based on specific requirements and application scenarios. It's always recommended to refer to the datasheet and consult with technical experts for accurate information.