Texas Instruments
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
SN74HCT377DWR
Näytä Yksityiskohdat DataSheets

SN74HCT377DWR

Product Overview

Category

SN74HCT377DWR belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in digital electronics for data storage and manipulation.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Schmitt-trigger inputs for noise immunity
  • 8-bit D-type flip-flop with transparent latch

Package

SN74HCT377DWR is available in a small-outline package (SOIC) with a width of 3.9mm.

Essence

The essence of SN74HCT377DWR lies in its ability to store and manipulate digital data efficiently.

Packaging/Quantity

This IC is typically packaged in reels, with each reel containing 2500 units.

Specifications

  • Supply Voltage: 2V to 6V
  • Input Voltage: 0V to VCC
  • Output Voltage: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Clock Frequency: 25MHz

Detailed Pin Configuration

  1. CP (Clock Pulse) - Clock input for flip-flop operation.
  2. D0-D7 (Data Inputs) - Inputs for the 8-bit data to be stored.
  3. Q0-Q7 (Outputs) - Outputs for the stored data.
  4. OE (Output Enable) - Enables/disables the outputs.
  5. LE (Latch Enable) - Latches the data when enabled.
  6. MR (Master Reset) - Resets the flip-flop to an initial state.
  7. GND (Ground) - Ground reference for the IC.
  8. VCC (Supply Voltage) - Positive supply voltage for the IC.

Functional Features

  • The SN74HCT377DWR consists of eight D-type flip-flops with a transparent latch.
  • It can store and manipulate 8-bit data simultaneously.
  • The outputs can be enabled or disabled using the output enable (OE) pin.
  • The latch enable (LE) pin allows latching of data when required.
  • The master reset (MR) pin resets all flip-flops to an initial state.

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient data processing.
  • Low power consumption makes it suitable for battery-powered devices.
  • Wide operating voltage range provides flexibility in various applications.
  • Schmitt-trigger inputs ensure noise immunity, enhancing reliability.

Disadvantages

  • Limited storage capacity compared to larger memory ICs.
  • Not suitable for applications requiring complex data manipulation.

Working Principles

The SN74HCT377DWR operates based on the principles of D-type flip-flops. When the clock pulse (CP) is triggered, the input data (D0-D7) is stored in the flip-flops. The stored data can be latched using the latch enable (LE) pin. The outputs (Q0-Q7) reflect the stored data, which can be enabled or disabled using the output enable (OE) pin. The master reset (MR) pin resets all flip-flops to their initial state.

Detailed Application Field Plans

SN74HCT377DWR finds applications in various digital systems, including: 1. Microcontrollers 2. Data storage devices 3. Communication systems 4. Industrial automation 5. Consumer electronics

Detailed and Complete Alternative Models

  1. 74HC377: Similar functionality but operates at a lower voltage range.
  2. CD4013: Dual D-type flip-flop with similar characteristics.
  3. MC74HCT377: Higher-speed version with improved performance.

These alternative models provide similar functionality to SN74HCT377DWR and can be used as replacements in different applications.

Word count: 496 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät SN74HCT377DWR :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of SN74HCT377DWR:

  1. Q: What is SN74HCT377DWR? A: SN74HCT377DWR is a type of integrated circuit (IC) commonly used in digital systems for storing and manipulating data.

  2. Q: What is the function of SN74HCT377DWR? A: SN74HCT377DWR is an octal D-type flip-flop with a transparent latch, which means it can store and transfer data in digital circuits.

  3. Q: What voltage levels does SN74HCT377DWR support? A: SN74HCT377DWR supports a wide range of voltage levels, typically between 4.5V and 5.5V.

  4. Q: How many flip-flops are there in SN74HCT377DWR? A: SN74HCT377DWR contains eight individual flip-flops, making it an octal (8-bit) device.

  5. Q: Can SN74HCT377DWR be used for both synchronous and asynchronous applications? A: Yes, SN74HCT377DWR can be used in both synchronous and asynchronous applications, depending on the design requirements.

  6. Q: What is the maximum clock frequency supported by SN74HCT377DWR? A: The maximum clock frequency supported by SN74HCT377DWR is typically around 25 MHz.

  7. Q: Does SN74HCT377DWR have any special power-saving features? A: No, SN74HCT377DWR does not have any specific power-saving features. It operates at the same power level as other HCT series ICs.

  8. Q: Can SN74HCT377DWR be cascaded to increase the number of flip-flops? A: Yes, SN74HCT377DWR can be cascaded with other similar devices to increase the number of flip-flops in a digital circuit.

  9. Q: What is the typical propagation delay of SN74HCT377DWR? A: The typical propagation delay of SN74HCT377DWR is around 15 ns, which indicates the time taken for the output to respond to a change in input.

  10. Q: Are there any specific precautions to consider when using SN74HCT377DWR? A: It is important to ensure proper decoupling and power supply bypassing to minimize noise and voltage fluctuations. Additionally, following the recommended operating conditions and voltage levels is crucial for reliable operation.

Please note that these answers are general and may vary depending on the specific application and datasheet of SN74HCT377DWR.