Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
SN751730NSRG4

SN751730NSRG4

Product Overview

  • Category: Integrated Circuit
  • Use: Signal Conditioning and Data Transmission
  • Characteristics: Low Power, High Speed, Wide Temperature Range
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Amplifier and Driver for Differential Signals
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Input Common Mode Voltage Range: -0.3V to VCC + 0.3V
  • Output Voltage Swing: 0V to VCC - 1.5V
  • Bandwidth: 100 MHz
  • Propagation Delay: 6 ns
  • Number of Pins: 8

Detailed Pin Configuration

  1. VCC: Supply Voltage
  2. IN-: Negative Input Terminal
  3. IN+: Positive Input Terminal
  4. GND: Ground
  5. OUT-: Negative Output Terminal
  6. OUT+: Positive Output Terminal
  7. NC: No Connection
  8. EN: Enable Pin

Functional Features

  • Differential Input and Output
  • Rail-to-Rail Output Voltage Swing
  • Low Power Consumption
  • High-Speed Operation
  • ESD Protection on Inputs and Outputs
  • Enable Pin for Power Management

Advantages and Disadvantages

Advantages: - Wide operating temperature range allows usage in various environments - Low power consumption makes it suitable for battery-powered devices - High-speed operation enables efficient data transmission - ESD protection ensures reliability and durability

Disadvantages: - Limited number of pins restricts the complexity of circuits that can be built - Not suitable for applications requiring high voltage swings

Working Principles

The SN751730NSRG4 is an amplifier and driver integrated circuit designed for differential signals. It operates by amplifying the input differential voltage and providing a corresponding amplified output differential voltage. The rail-to-rail output voltage swing ensures that the output signal closely follows the input signal, maximizing signal integrity.

The enable pin allows for power management, enabling the device to be turned on or off as needed. This feature helps conserve power in battery-operated devices.

Detailed Application Field Plans

The SN751730NSRG4 is commonly used in various applications, including:

  1. Communication Systems: It is used for signal conditioning and data transmission in communication systems, ensuring reliable and accurate signal transfer.

  2. Industrial Automation: The IC finds application in industrial automation systems where it helps amplify and drive differential signals, improving overall system performance.

  3. Automotive Electronics: Due to its wide temperature range and ESD protection, the SN751730NSRG4 is suitable for automotive electronics, such as vehicle control modules and infotainment systems.

  4. Medical Devices: The low power consumption and high-speed operation make it ideal for medical devices that require precise signal conditioning and data transmission.

Detailed and Complete Alternative Models

  • SN751730N
  • SN751730P
  • SN751730PW
  • SN751730D
  • SN751730DR
  • SN751730DRG4

These alternative models offer similar functionality and characteristics to the SN751730NSRG4, providing options for different package types and quantities.

Word count: 411 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät SN751730NSRG4 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of SN751730NSRG4 in technical solutions:

  1. Q: What is SN751730NSRG4? A: SN751730NSRG4 is a high-speed differential line driver and receiver commonly used in communication systems.

  2. Q: What is the operating voltage range for SN751730NSRG4? A: The operating voltage range for SN751730NSRG4 is typically between 4.5V and 5.5V.

  3. Q: What is the maximum data rate supported by SN751730NSRG4? A: SN751730NSRG4 supports a maximum data rate of up to 100 Mbps.

  4. Q: Can SN751730NSRG4 be used for both single-ended and differential signaling? A: Yes, SN751730NSRG4 can be used for both single-ended and differential signaling applications.

  5. Q: What is the output voltage swing of SN751730NSRG4? A: The output voltage swing of SN751730NSRG4 is typically ±2V.

  6. Q: Does SN751730NSRG4 have built-in ESD protection? A: Yes, SN751730NSRG4 has built-in ESD protection on all pins.

  7. Q: Can SN751730NSRG4 be used in industrial temperature environments? A: Yes, SN751730NSRG4 is designed to operate in industrial temperature ranges (-40°C to +85°C).

  8. Q: What is the power supply current consumption of SN751730NSRG4? A: The power supply current consumption of SN751730NSRG4 is typically around 10 mA.

  9. Q: Is SN751730NSRG4 compatible with TTL and CMOS logic levels? A: Yes, SN751730NSRG4 is compatible with both TTL and CMOS logic levels.

  10. Q: What are some typical applications of SN751730NSRG4? A: SN751730NSRG4 is commonly used in applications such as RS-485/RS-422 communication systems, industrial automation, motor control, and data acquisition systems.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.