TLV2376IDGKT
Product Overview
- Category: Integrated Circuit (IC)
- Use: Operational Amplifier
- Characteristics: Low-voltage, Rail-to-Rail Output, General Purpose
- Package: VSSOP-8
- Essence: TLV2376IDGKT is a low-voltage operational amplifier designed for general-purpose applications. It offers rail-to-rail output swing and operates from a single supply voltage as low as 2.7V.
- Packaging/Quantity: The TLV2376IDGKT comes in a VSSOP-8 package and is typically sold in reels of 2500 units.
Specifications
- Supply Voltage Range: 2.7V to 5.5V
- Input Offset Voltage: ±1.5mV (maximum)
- Input Bias Current: ±1pA (typical)
- Gain Bandwidth Product: 3MHz (typical)
- Slew Rate: 1.6V/µs (typical)
- Quiescent Current: 900µA (typical)
- Operating Temperature Range: -40°C to +125°C
Pin Configuration
The TLV2376IDGKT has the following pin configuration:
___________
OUT | 1 8 | VCC
IN- | 2 7 | IN+
IN+ | 3 6 | NC
V- | 4 5 | NC
‾‾‾‾‾‾‾‾‾‾‾
Functional Features
- Low-voltage operation: Can be powered by a single supply voltage as low as 2.7V.
- Rail-to-rail output swing: Provides an output voltage range that extends close to the supply rails.
- General-purpose design: Suitable for a wide range of applications.
- Low input offset voltage and bias current: Ensures accurate signal amplification.
Advantages and Disadvantages
Advantages: - Low-voltage operation allows for compatibility with low-power systems. - Rail-to-rail output swing enables maximum utilization of the available voltage range. - General-purpose design makes it versatile for various applications. - Low input offset voltage and bias current ensure accurate amplification.
Disadvantages: - Limited gain bandwidth product compared to specialized amplifiers. - Slew rate may not be sufficient for high-speed applications.
Working Principles
The TLV2376IDGKT is an operational amplifier that amplifies the difference between its two input voltages. It operates by using a differential input stage followed by a gain stage. The rail-to-rail output swing allows the amplifier to provide an output voltage that closely matches the input voltage, even when the input voltage approaches the supply rails.
Detailed Application Field Plans
The TLV2376IDGKT can be used in various applications, including but not limited to: 1. Sensor signal conditioning 2. Audio amplification 3. Active filters 4. Voltage and current measurement circuits 5. Portable devices requiring low-voltage operation
Detailed and Complete Alternative Models
Some alternative models to TLV2376IDGKT that offer similar functionality are: 1. LMV321: Low-voltage, Rail-to-Rail Output Operational Amplifier 2. MCP6001: Single Supply, Rail-to-Rail Input/Output Op Amp 3. MAX44267: Precision, Low-Noise, Rail-to-Rail Output Op Amp 4. AD8605: Low Noise, Rail-to-Rail Output Operational Amplifier
These alternative models can be considered based on specific application requirements and desired performance characteristics.
Word count: 364 words
Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät TLV2376IDGKT :n soveltamiseen teknisissä ratkaisuissa
Sure! Here are 10 common questions and answers related to the application of TLV2376IDGKT:
Q: What is TLV2376IDGKT? A: TLV2376IDGKT is a precision operational amplifier (op-amp) designed for various technical applications.
Q: What is the voltage supply range for TLV2376IDGKT? A: The voltage supply range for TLV2376IDGKT is typically between 2.7V and 36V.
Q: What is the input offset voltage of TLV2376IDGKT? A: The input offset voltage of TLV2376IDGKT is typically around 500µV.
Q: Can TLV2376IDGKT operate in single-supply mode? A: Yes, TLV2376IDGKT can operate in both single-supply and dual-supply modes.
Q: What is the bandwidth of TLV2376IDGKT? A: The bandwidth of TLV2376IDGKT is typically around 10MHz.
Q: Does TLV2376IDGKT have rail-to-rail inputs and outputs? A: Yes, TLV2376IDGKT has rail-to-rail inputs and outputs, allowing it to handle signals close to the supply rails.
Q: What is the maximum output current of TLV2376IDGKT? A: The maximum output current of TLV2376IDGKT is typically around 30mA.
Q: Can TLV2376IDGKT be used in low-power applications? A: Yes, TLV2376IDGKT has a low quiescent current consumption, making it suitable for low-power applications.
Q: Is TLV2376IDGKT suitable for precision measurement applications? A: Yes, TLV2376IDGKT has low input offset voltage and low input bias current, making it suitable for precision measurement applications.
Q: What is the package type of TLV2376IDGKT? A: TLV2376IDGKT is available in a small 8-pin VSSOP package, which is compact and suitable for space-constrained designs.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications or application requirements.