Texas Instruments
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
TMP235A4DCKR
Näytä Yksityiskohdat DataSheets

TMP235A4DCKR

Product Overview

Category

The TMP235A4DCKR belongs to the category of temperature sensors.

Use

It is used for accurately measuring temperature in various applications.

Characteristics

  • High accuracy
  • Low power consumption
  • Small package size
  • Digital output

Package

The TMP235A4DCKR comes in a small form factor package suitable for surface mount applications.

Essence

The essence of TMP235A4DCKR lies in its precise temperature measurement capabilities and compact design.

Packaging/Quantity

The sensor is typically available in reels containing a specific quantity, as per the manufacturer's specifications.

Specifications

  • Temperature Range: -40°C to 125°C
  • Accuracy: ±0.5°C (typical)
  • Supply Voltage: 2.7V to 5.5V
  • Output: Digital

Detailed Pin Configuration

The TMP235A4DCKR features a standard pin configuration with pins for power supply, ground, and digital output.

Functional Features

  • High accuracy over a wide temperature range
  • Low power consumption for energy-efficient operation
  • Digital output for easy interfacing with microcontrollers

Advantages

  • Precise temperature measurement
  • Suitable for battery-powered devices
  • Compact and easy to integrate into designs

Disadvantages

  • Limited temperature range compared to some other sensors
  • Requires careful handling during assembly due to its small size

Working Principles

The TMP235A4DCKR operates based on the principle of voltage output proportional to the measured temperature. It utilizes internal circuitry to convert the analog temperature signal into a digital output.

Detailed Application Field Plans

The TMP235A4DCKR is well-suited for applications such as: - Portable consumer electronics - Industrial temperature monitoring systems - Automotive climate control systems

Detailed and Complete Alternative Models

Some alternative models to consider are: - TMP235B4DCKR: Offers extended temperature range - TMP236A4DCKR: Higher accuracy and lower power consumption

In conclusion, the TMP235A4DCKR is a versatile temperature sensor with high accuracy and low power consumption, making it suitable for a wide range of applications.

[Word count: 298]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät TMP235A4DCKR :n soveltamiseen teknisissä ratkaisuissa

  1. What is the operating temperature range of TMP235A4DCKR?

    • The operating temperature range of TMP235A4DCKR is -40°C to 125°C.

  2. What is the supply voltage range for TMP235A4DCKR?

    • The supply voltage range for TMP235A4DCKR is 2.7V to 5.5V.

  3. How accurate is the temperature measurement with TMP235A4DCKR?

    • TMP235A4DCKR has an accuracy of ±1°C (maximum) over the full temperature range.

  4. What is the output format of TMP235A4DCKR?

    • TMP235A4DCKR provides a digital output in 12-bit resolution.

  5. Can TMP235A4DCKR be used in battery-powered applications?

    • Yes, TMP235A4DCKR's low supply voltage range makes it suitable for battery-powered applications.

  6. Does TMP235A4DCKR require calibration?

    • No, TMP235A4DCKR is factory-calibrated and does not require additional calibration.

  7. What is the response time of TMP235A4DCKR?

    • TMP235A4DCKR has a fast response time, typically less than 1 second.

  8. Is TMP235A4DCKR suitable for industrial applications?

    • Yes, TMP235A4DCKR is designed for industrial temperature sensing applications.

  9. Can TMP235A4DCKR be interfaced with microcontrollers?

    • Yes, TMP235A4DCKR can be easily interfaced with most microcontrollers using its digital output.

  10. What are the typical applications for TMP235A4DCKR?

    • TMP235A4DCKR is commonly used in HVAC systems, industrial control systems, and consumer electronics for temperature monitoring and control.