Texas Instruments
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
TPIC2030DBTRG4
Näytä Yksityiskohdat DataSheets

TPIC2030DBTRG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Motor Driver
  • Characteristics: High current, high voltage, low power consumption
  • Package: DBT (PowerPAD™ SOIC)
  • Essence: Bipolar Power IC
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Operating Voltage: 3V to 50V
  • Output Current: Up to 2.5A
  • Output Voltage: Up to 50V
  • Number of Outputs: 1
  • Input Logic Compatibility: TTL/CMOS
  • Operating Temperature Range: -40°C to +150°C

Detailed Pin Configuration

The TPIC2030DBTRG4 has a total of 20 pins. The pin configuration is as follows:

  1. OUT1 - Output 1
  2. GND - Ground
  3. VCC - Supply Voltage
  4. IN1 - Input 1
  5. IN2 - Input 2
  6. IN3 - Input 3
  7. IN4 - Input 4
  8. OUT2 - Output 2
  9. OUT3 - Output 3
  10. OUT4 - Output 4
  11. OUT5 - Output 5
  12. OUT6 - Output 6
  13. OUT7 - Output 7
  14. OUT8 - Output 8
  15. OUT9 - Output 9
  16. OUT10 - Output 10
  17. OUT11 - Output 11
  18. OUT12 - Output 12
  19. OUT13 - Output 13
  20. OUT14 - Output 14

Functional Features

  • High current sourcing and sinking capability
  • Built-in protection against over-temperature, over-voltage, and short circuits
  • Low power consumption in standby mode
  • Fast switching speed for efficient motor control

Advantages and Disadvantages

Advantages

  • High current and voltage handling capability
  • Integrated protection features ensure safe operation
  • Low power consumption increases overall efficiency
  • Compact package size allows for space-saving designs

Disadvantages

  • Limited number of outputs (14)
  • Higher cost compared to some alternative models

Working Principles

The TPIC2030DBTRG4 is a bipolar power IC designed for motor driver applications. It utilizes high current and voltage capabilities to drive motors efficiently. The inputs (IN1 to IN4) control the corresponding outputs (OUT1 to OUT14), allowing precise motor control. The IC also incorporates built-in protection features to safeguard against over-temperature, over-voltage, and short circuits.

Detailed Application Field Plans

The TPIC2030DBTRG4 is commonly used in various motor control applications, including:

  1. Robotics: Controlling motors in robotic systems for precise movement.
  2. Automotive: Driving motors in automotive applications such as power windows, seat adjustments, and HVAC systems.
  3. Industrial Automation: Motor control in industrial machinery, conveyor belts, and assembly lines.
  4. Home Appliances: Controlling motors in appliances like washing machines, dishwashers, and refrigerators.

Detailed and Complete Alternative Models

  1. L293D - Dual H-Bridge Motor Driver IC
  2. DRV8825 - Stepper Motor Driver IC
  3. TB6600 - Single-Axis Stepper Motor Driver IC
  4. SN754410 - Quadruple Half-H Driver IC
  5. A4988 - Stepper Motor Driver IC

These alternative models offer similar functionality and can be considered as substitutes for the TPIC2030DBTRG4 depending on specific requirements.

Word count: 408 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät TPIC2030DBTRG4 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of TPIC2030DBTRG4 in technical solutions:

  1. Q: What is TPIC2030DBTRG4? A: TPIC2030DBTRG4 is a high-current, high-voltage power distribution switch used in automotive and industrial applications.

  2. Q: What is the maximum current rating of TPIC2030DBTRG4? A: The maximum current rating of TPIC2030DBTRG4 is typically 3.5A.

  3. Q: What is the input voltage range for TPIC2030DBTRG4? A: The input voltage range for TPIC2030DBTRG4 is typically between 2.7V and 5.5V.

  4. Q: Can TPIC2030DBTRG4 handle short-circuit conditions? A: Yes, TPIC2030DBTRG4 has built-in protection features that allow it to handle short-circuit conditions without damage.

  5. Q: Is TPIC2030DBTRG4 suitable for automotive applications? A: Yes, TPIC2030DBTRG4 is designed specifically for automotive applications and meets the necessary industry standards.

  6. Q: Does TPIC2030DBTRG4 have thermal shutdown protection? A: Yes, TPIC2030DBTRG4 includes thermal shutdown protection to prevent overheating and damage.

  7. Q: Can TPIC2030DBTRG4 be used in industrial control systems? A: Yes, TPIC2030DBTRG4 is commonly used in industrial control systems due to its high-current handling capabilities.

  8. Q: What is the typical on-resistance of TPIC2030DBTRG4? A: The typical on-resistance of TPIC2030DBTRG4 is around 100mΩ.

  9. Q: Does TPIC2030DBTRG4 have overcurrent protection? A: Yes, TPIC2030DBTRG4 includes overcurrent protection to prevent excessive current flow.

  10. Q: Can TPIC2030DBTRG4 be used in battery management systems? A: Yes, TPIC2030DBTRG4 is commonly used in battery management systems to control power distribution and protect against faults.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.