Texas Instruments
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
TPS2110PWRG4
Näytä Yksityiskohdat DataSheets

TPS2110PWRG4

Product Overview

Category

The TPS2110PWRG4 belongs to the category of power management integrated circuits (PMICs).

Use

This PMIC is primarily used for power multiplexing and protection in various electronic devices.

Characteristics

  • Power multiplexing: The TPS2110PWRG4 allows seamless switching between two power sources, ensuring uninterrupted power supply.
  • Overcurrent protection: It incorporates built-in overcurrent protection mechanisms to safeguard the connected devices.
  • Low power consumption: The TPS2110PWRG4 is designed to minimize power loss during operation.
  • Wide input voltage range: It can handle a wide range of input voltages, making it suitable for diverse applications.

Package

The TPS2110PWRG4 is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of the TPS2110PWRG4 lies in its ability to efficiently manage power sources and protect connected devices from potential damage.

Packaging/Quantity

The TPS2110PWRG4 is typically packaged in reels, with each reel containing a specified quantity of ICs.

Specifications

  • Input voltage range: 2.7V to 5.5V
  • Output voltage range: 0V to VCC
  • Maximum continuous current: 1A
  • Operating temperature range: -40°C to 85°C
  • Package type: SOIC-8

Detailed Pin Configuration

The TPS2110PWRG4 features an 8-pin configuration:

  1. EN (Enable): Controls the power multiplexer's operation.
  2. IN1 (Input 1): Connects to the first power source.
  3. IN2 (Input 2): Connects to the second power source.
  4. OUT (Output): Provides the selected power source to the load.
  5. GND (Ground): Common ground reference for all pins.
  6. FLT (Fault): Indicates overcurrent or fault conditions.
  7. VCC (Voltage Common Collector): Supplies power to the IC.
  8. NC (No Connection): Unused pin.

Functional Features

  • Seamless power switching: The TPS2110PWRG4 enables smooth transition between two power sources without interruption.
  • Overcurrent protection: It incorporates a fault detection mechanism that safeguards against excessive current flow.
  • Fast response time: The PMIC quickly detects and responds to changes in power source availability.
  • Low power consumption: The TPS2110PWRG4 minimizes power loss during operation, enhancing overall energy efficiency.

Advantages and Disadvantages

Advantages

  • Efficient power multiplexing and protection.
  • Wide input voltage range allows versatility in applications.
  • Compact SOIC package facilitates integration into various electronic devices.
  • Low power consumption enhances energy efficiency.

Disadvantages

  • Limited maximum continuous current may restrict usage in high-power applications.
  • Lack of advanced features compared to more specialized PMICs.

Working Principles

The TPS2110PWRG4 operates by monitoring the voltage levels of the two input sources (IN1 and IN2). Based on the enable signal (EN), it selects the appropriate power source and routes it to the output pin (OUT). The fault pin (FLT) provides an indication if an overcurrent condition is detected, allowing for prompt action to protect the connected devices.

Detailed Application Field Plans

The TPS2110PWRG4 finds application in various electronic devices, including but not limited to: - Portable electronics (e.g., smartphones, tablets) - Battery-powered devices - Industrial control systems - Automotive electronics - IoT devices

Detailed and Complete Alternative Models

  1. TPS2111PWRG4: Similar to TPS2110PWRG4, but with a higher maximum continuous current rating of 2A.
  2. TPS2112PWRG4: A power multiplexer with additional features such as thermal shutdown and reverse current protection.
  3. TPS2113PWRG4: Offers power multiplexing and overvoltage protection capabilities.

These alternative models provide options with varying specifications and additional functionalities, catering to different application requirements.

Word count: 533 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät TPS2110PWRG4 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of TPS2110PWRG4 in technical solutions:

  1. Q: What is TPS2110PWRG4? A: TPS2110PWRG4 is a power multiplexer IC (Integrated Circuit) that allows seamless switching between two power sources.

  2. Q: What are the key features of TPS2110PWRG4? A: The key features of TPS2110PWRG4 include low on-resistance, wide input voltage range, overcurrent protection, and thermal shutdown.

  3. Q: How does TPS2110PWRG4 work? A: TPS2110PWRG4 works by monitoring the input voltages and automatically selecting the higher voltage source while disconnecting the lower voltage source.

  4. Q: What are the typical applications of TPS2110PWRG4? A: TPS2110PWRG4 is commonly used in systems that require power redundancy, such as battery-powered devices, USB hubs, and industrial automation equipment.

  5. Q: Can TPS2110PWRG4 handle high currents? A: Yes, TPS2110PWRG4 can handle currents up to a certain limit, typically around 2A, depending on the specific model.

  6. Q: Does TPS2110PWRG4 support reverse polarity protection? A: No, TPS2110PWRG4 does not have built-in reverse polarity protection. Additional circuitry may be required for reverse polarity protection.

  7. Q: Is TPS2110PWRG4 compatible with both analog and digital signals? A: Yes, TPS2110PWRG4 can handle both analog and digital signals, making it suitable for a wide range of applications.

  8. Q: Can TPS2110PWRG4 be used in automotive applications? A: Yes, TPS2110PWRG4 is designed to meet the requirements of automotive applications and can operate in harsh environments.

  9. Q: What is the operating temperature range of TPS2110PWRG4? A: The operating temperature range of TPS2110PWRG4 is typically -40°C to +125°C, ensuring reliable performance in various conditions.

  10. Q: Are there any evaluation boards or reference designs available for TPS2110PWRG4? A: Yes, Texas Instruments provides evaluation boards and reference designs that can help users quickly prototype and implement TPS2110PWRG4 in their applications.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.