Texas Instruments
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
TPS2560DRCR
Näytä Yksityiskohdat DataSheets

TPS2560DRCR

Product Overview

Category

The TPS2560DRCR belongs to the category of power management integrated circuits (PMICs).

Use

It is primarily used for power distribution and protection in electronic devices.

Characteristics

  • High efficiency power distribution
  • Overvoltage and overcurrent protection
  • Low quiescent current
  • Fast response time

Package

The TPS2560DRCR comes in a small outline package (SOP) with 8 pins.

Essence

The essence of the TPS2560DRCR lies in its ability to efficiently distribute power while protecting the device from voltage spikes and excessive current.

Packaging/Quantity

The TPS2560DRCR is typically packaged in reels, with each reel containing 2500 units.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 5.3V
  • Maximum Continuous Current: 1.5A
  • Quiescent Current: 60µA
  • Operating Temperature Range: -40°C to 85°C

Pin Configuration

The TPS2560DRCR has the following pin configuration:

  1. EN (Enable)
  2. IN (Input Voltage)
  3. GND (Ground)
  4. PG (Power Good)
  5. OUT (Output Voltage)
  6. FB (Feedback)
  7. ILIM (Current Limit)
  8. VBUS (USB Bus Voltage)

Functional Features

  • Power distribution control
  • Overvoltage and overcurrent protection
  • Power good indication
  • Adjustable output voltage
  • Current limit setting

Advantages

  • High efficiency power distribution reduces energy waste
  • Fast response time protects the device from voltage spikes
  • Low quiescent current minimizes power consumption
  • Adjustable output voltage allows for flexibility in different applications

Disadvantages

  • Limited maximum continuous current may not be suitable for high-power devices
  • Operating temperature range may restrict usage in extreme environments

Working Principles

The TPS2560DRCR operates by monitoring the input voltage and current. It regulates the output voltage based on the feedback received from the device it powers. If the input voltage exceeds the specified limit or if the current exceeds the set threshold, the TPS2560DRCR activates its protection mechanism to safeguard the device.

Detailed Application Field Plans

The TPS2560DRCR finds applications in various electronic devices, including:

  1. Mobile phones and tablets
  2. Portable gaming consoles
  3. Wearable devices
  4. IoT devices
  5. USB-powered devices

Detailed and Complete Alternative Models

  1. TPS2561DRCR
  2. TPS2561DRCT
  3. TPS2561DRCRG4
  4. TPS2561DRCTG4
  5. TPS2561DRCR-EP

These alternative models offer similar functionality and characteristics to the TPS2560DRCR, providing options for different design requirements.

In conclusion, the TPS2560DRCR is a power management integrated circuit that efficiently distributes power while protecting electronic devices from voltage spikes and excessive current. Its adjustable output voltage, fast response time, and low quiescent current make it suitable for a wide range of applications. However, designers should consider the limited maximum continuous current and operating temperature range when selecting this IC for their specific needs.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät TPS2560DRCR :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of TPS2560DRCR in technical solutions:

  1. Q: What is TPS2560DRCR? A: TPS2560DRCR is a power distribution switch with an integrated current-limiting feature, commonly used in electronic devices.

  2. Q: What is the maximum input voltage supported by TPS2560DRCR? A: The maximum input voltage supported by TPS2560DRCR is typically 5.5V.

  3. Q: What is the purpose of using TPS2560DRCR in a technical solution? A: TPS2560DRCR is used to control the power distribution and protect downstream components from excessive current or voltage.

  4. Q: Can TPS2560DRCR handle high currents? A: Yes, TPS2560DRCR can handle currents up to a certain limit, usually around 2A.

  5. Q: How does TPS2560DRCR protect against overcurrent conditions? A: TPS2560DRCR has built-in current-limiting functionality that automatically shuts off the power path when the current exceeds a set threshold.

  6. Q: Is TPS2560DRCR suitable for battery-powered applications? A: Yes, TPS2560DRCR is commonly used in battery-powered applications as it helps manage power distribution efficiently.

  7. Q: Can TPS2560DRCR be used in automotive applications? A: Yes, TPS2560DRCR is designed to meet automotive-grade requirements and can be used in automotive applications.

  8. Q: Does TPS2560DRCR have thermal protection features? A: Yes, TPS2560DRCR has built-in thermal shutdown protection that activates when the device temperature exceeds a certain threshold.

  9. Q: Can TPS2560DRCR be used in parallel to increase current handling capacity? A: Yes, multiple TPS2560DRCR devices can be connected in parallel to increase the overall current handling capacity.

  10. Q: What are some typical applications of TPS2560DRCR? A: TPS2560DRCR is commonly used in USB power switches, portable devices, battery chargers, and other applications requiring power distribution control.

Please note that the answers provided here are general and may vary depending on specific product datasheets and application requirements.