The TPS3702AX33DDCT belongs to the category of integrated circuits (ICs).
This IC is commonly used for voltage monitoring and supervision in various electronic systems.
The TPS3702AX33DDCT is available in a small SOT-23-6 package. It is typically sold in reels or tubes containing multiple units.
The essence of the TPS3702AX33DDCT is its ability to monitor and supervise voltage levels in electronic systems, ensuring proper operation and preventing damage due to overvoltage or undervoltage conditions.
The TPS3702AX33DDCT has six pins arranged as follows:
```
| | --| VDD GND |-- Pin 1: Ground (GND) --| VIN OUT |-- Pin 2: Output (OUT) --| SET EN |-- Pin 3: Enable (EN) |___________| ```
The TPS3702AX33DDCT operates by comparing the input voltage (VIN) with a user-adjustable threshold voltage (SET). When the input voltage exceeds the threshold, the output (OUT) is pulled low. Conversely, when the input voltage falls below the threshold, the output is released and pulled high.
The enable pin (EN) allows the device to enter a low-power mode, reducing quiescent current consumption when voltage monitoring is not required.
The TPS3702AX33DDCT finds applications in various electronic systems where voltage monitoring is critical. Some potential application fields include:
These alternative models offer different threshold voltage options to suit specific voltage monitoring requirements.
In conclusion, the TPS3702AX33DDCT is a versatile voltage monitoring IC that offers adjustable threshold voltage, low power consumption, and compact packaging. Its wide range of applications and availability of alternative models make it a popular choice in various electronic systems.
Sure! Here are 10 common questions and answers related to the application of TPS3702AX33DDCT in technical solutions:
Q: What is TPS3702AX33DDCT? A: TPS3702AX33DDCT is a voltage supervisor and reset IC manufactured by Texas Instruments.
Q: What is the purpose of TPS3702AX33DDCT? A: TPS3702AX33DDCT is designed to monitor the voltage level of a system and provide a reset signal when the voltage falls below a certain threshold.
Q: What is the operating voltage range of TPS3702AX33DDCT? A: TPS3702AX33DDCT operates within a voltage range of 1.8V to 6.5V.
Q: How does TPS3702AX33DDCT detect undervoltage conditions? A: TPS3702AX33DDCT compares the monitored voltage with a reference voltage and triggers an output when the monitored voltage drops below the reference voltage.
Q: Can TPS3702AX33DDCT be used in battery-powered applications? A: Yes, TPS3702AX33DDCT can be used in battery-powered applications as it has a low quiescent current and operates at low voltages.
Q: What is the typical reset time delay of TPS3702AX33DDCT? A: The typical reset time delay of TPS3702AX33DDCT is around 200ms.
Q: Does TPS3702AX33DDCT have any built-in hysteresis? A: Yes, TPS3702AX33DDCT has a built-in hysteresis of approximately 50mV to prevent false triggering due to voltage fluctuations.
Q: Can TPS3702AX33DDCT be used in automotive applications? A: Yes, TPS3702AX33DDCT is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q: What is the package type of TPS3702AX33DDCT? A: TPS3702AX33DDCT is available in a small SOT-23-5 package.
Q: Are there any application notes or reference designs available for TPS3702AX33DDCT? A: Yes, Texas Instruments provides application notes and reference designs that can help with the implementation of TPS3702AX33DDCT in various technical solutions.
Please note that these answers are general and may vary depending on the specific requirements and use cases. It's always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.