Texas Instruments
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
TUSB213RGYR
Näytä Yksityiskohdat DataSheets

TUSB213RGYR

Product Overview

Category

TUSB213RGYR belongs to the category of USB signal switches.

Use

It is primarily used for switching USB signals in electronic devices.

Characteristics

  • High-speed USB 2.0 signal switching capability
  • Low on-resistance
  • Low power consumption
  • Wide operating voltage range
  • Compact package size

Package

TUSB213RGYR is available in a small outline package (SOP) with a specified pin configuration.

Essence

The essence of TUSB213RGYR lies in its ability to efficiently switch USB signals while maintaining high-speed data transmission.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Operating Voltage Range: 1.65V to 5.5V
  • On-Resistance: 4 ohms (typical)
  • Bandwidth: 480 Mbps
  • Supply Current: 1 µA (standby), 3 mA (active)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

TUSB213RGYR has a total of 8 pins, each serving a specific function:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. DP1: USB data positive line 1
  4. DM1: USB data negative line 1
  5. DP2: USB data positive line 2
  6. DM2: USB data negative line 2
  7. SEL: Signal selection control
  8. EN: Enable control

Functional Features

  • High-speed USB signal switching between two data lines
  • Low on-resistance ensures minimal signal distortion
  • Wide operating voltage range allows compatibility with various systems
  • Low power consumption for energy-efficient operation
  • Compact package size enables space-saving designs

Advantages and Disadvantages

Advantages

  • High-speed USB 2.0 signal switching capability
  • Low on-resistance for minimal signal distortion
  • Wide operating voltage range for compatibility with different systems
  • Compact package size for space-saving designs

Disadvantages

  • Limited to USB signal switching functionality
  • May require additional components for complete USB interface implementation

Working Principles

TUSB213RGYR operates by selectively connecting either DP1/DM1 or DP2/DM2 pairs to the USB data lines, controlled by the SEL pin. This allows seamless switching between two USB data sources.

Detailed Application Field Plans

TUSB213RGYR finds applications in various electronic devices that require USB signal switching, such as: - USB hubs - USB switches - USB docking stations - USB peripherals

Detailed and Complete Alternative Models

Some alternative models to TUSB213RGYR include: - TUSB215RGYR - TUSB217RGYR - TUSB219RGYR

These models offer similar USB signal switching capabilities with slight variations in specifications and pin configurations.

In conclusion, TUSB213RGYR is a high-performance USB signal switch that provides efficient and reliable switching of USB signals in electronic devices. Its compact size, low power consumption, and wide operating voltage range make it suitable for various applications. However, it is important to consider alternative models based on specific requirements.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät TUSB213RGYR :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of TUSB213RGYR in technical solutions:

  1. Q: What is the TUSB213RGYR? A: The TUSB213RGYR is a USB Type-C™ port controller with integrated USB Power Delivery (PD) and Alternate Mode (Alt Mode) support.

  2. Q: What are the key features of the TUSB213RGYR? A: The key features of the TUSB213RGYR include USB PD 3.0 support, USB Type-C CC detection, Alt Mode support for DisplayPort and Thunderbolt™, and integrated VBUS load switch.

  3. Q: How can I use the TUSB213RGYR in my design? A: The TUSB213RGYR can be used as a USB Type-C port controller in various applications such as laptops, tablets, docking stations, and monitors.

  4. Q: Does the TUSB213RGYR support USB Power Delivery? A: Yes, the TUSB213RGYR supports USB Power Delivery (PD) 3.0 specification, enabling power negotiation and delivery up to 100W.

  5. Q: Can the TUSB213RGYR handle multiple USB Type-C ports? A: Yes, the TUSB213RGYR can support multiple USB Type-C ports by cascading multiple devices together.

  6. Q: Does the TUSB213RGYR support DisplayPort Alternate Mode? A: Yes, the TUSB213RGYR supports DisplayPort Alternate Mode, allowing video and audio signals to be transmitted over the USB Type-C interface.

  7. Q: Can the TUSB213RGYR be used in Thunderbolt applications? A: Yes, the TUSB213RGYR supports Thunderbolt Alternate Mode, enabling high-speed data transfer and video/audio streaming.

  8. Q: What is the maximum voltage rating of the TUSB213RGYR? A: The TUSB213RGYR has a maximum voltage rating of 5.5V.

  9. Q: Does the TUSB213RGYR require external components for operation? A: Yes, the TUSB213RGYR requires external passive components such as resistors and capacitors for proper operation.

  10. Q: Where can I find more information about the TUSB213RGYR? A: You can find more detailed information about the TUSB213RGYR in the datasheet provided by the manufacturer or on their official website.