Texas Instruments
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
TUSB213RGYT
Näytä Yksityiskohdat DataSheets

TUSB213RGYT

Product Overview

Category

TUSB213RGYT belongs to the category of USB signal switches.

Use

It is primarily used for switching USB signals in electronic devices.

Characteristics

  • High-speed USB 2.0 signal switching capability
  • Low power consumption
  • Compact package size
  • Easy integration into circuit designs

Package

TUSB213RGYT is available in a small form factor package, typically a QFN (Quad Flat No-leads) package.

Essence

The essence of TUSB213RGYT lies in its ability to efficiently switch USB signals while maintaining high-speed data transmission.

Packaging/Quantity

This product is usually packaged in reels or trays and is available in various quantities depending on the manufacturer's specifications.

Specifications

  • USB Version: 2.0
  • Number of Channels: 1
  • Supply Voltage Range: 3V to 3.6V
  • On-State Resistance: 4 ohms (typical)
  • Bandwidth: Up to 480 Mbps

Detailed Pin Configuration

TUSB213RGYT has the following pin configuration:

  1. VCC: Power supply voltage input
  2. GND: Ground reference
  3. EN: Enable pin for controlling the switch
  4. D+: USB Data+ line
  5. D-: USB Data- line
  6. NC: No connection

Functional Features

  • High-speed USB signal switching
  • Low power consumption in standby mode
  • ESD protection for enhanced reliability
  • Integrated pull-up resistors for USB data lines

Advantages and Disadvantages

Advantages

  • Enables efficient switching of USB signals
  • Compact package size allows for easy integration into circuit designs
  • Low power consumption helps conserve energy
  • Provides ESD protection for improved reliability

Disadvantages

  • Limited to USB 2.0 compatibility
  • Single-channel configuration may not suit all applications

Working Principles

TUSB213RGYT operates by selectively connecting or disconnecting the USB data lines (D+ and D-) based on the control signal received at the EN pin. When enabled, the switch allows the USB signals to pass through, facilitating data transmission between the USB host and device. In the disabled state, the switch isolates the USB data lines, preventing any signal interference.

Detailed Application Field Plans

TUSB213RGYT finds applications in various electronic devices that require USB signal switching. Some potential application fields include:

  1. Portable electronic devices: Enables seamless switching between different USB peripherals.
  2. Computer peripherals: Facilitates easy connection of multiple USB devices to a computer system.
  3. Automotive systems: Allows for efficient switching of USB signals in car infotainment systems.
  4. Industrial equipment: Provides reliable USB signal switching in industrial automation applications.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to TUSB213RGYT are:

  1. TUSB215RGYR
  2. TUSB217RGYR
  3. TUSB211RGYR

These models have comparable specifications and can be considered as alternatives depending on specific requirements.

Word count: 409 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät TUSB213RGYT :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of TUSB213RGYT in technical solutions:

  1. Q: What is TUSB213RGYT? A: TUSB213RGYT is a USB Type-C™ port controller with integrated USB Power Delivery (PD) and Alternate Mode (Alt Mode) support.

  2. Q: What are the key features of TUSB213RGYT? A: The key features of TUSB213RGYT include USB PD 3.0 support, USB Type-C CC detection, Alt Mode support for DisplayPort and Thunderbolt™, and integrated VBUS load switch.

  3. Q: How can TUSB213RGYT be used in technical solutions? A: TUSB213RGYT can be used as a USB Type-C port controller in various applications such as laptops, tablets, docking stations, monitors, and other USB Type-C enabled devices.

  4. Q: Does TUSB213RGYT support USB Power Delivery? A: Yes, TUSB213RGYT supports USB Power Delivery (PD) 3.0 specification, allowing for fast charging and power negotiation between devices.

  5. Q: Can TUSB213RGYT handle multiple USB Type-C ports? A: Yes, TUSB213RGYT can handle multiple USB Type-C ports by cascading multiple controllers or using additional USB Type-C switches.

  6. Q: Does TUSB213RGYT support DisplayPort Alternate Mode? A: Yes, TUSB213RGYT supports DisplayPort Alternate Mode, enabling video output over the USB Type-C interface.

  7. Q: Is TUSB213RGYT compatible with Thunderbolt technology? A: Yes, TUSB213RGYT is compatible with Thunderbolt technology, allowing for high-speed data transfer and video output.

  8. Q: Can TUSB213RGYT be used in low-power applications? A: Yes, TUSB213RGYT has a low-power mode that allows it to operate with minimal power consumption when not actively transmitting data.

  9. Q: Does TUSB213RGYT provide protection against overvoltage and overcurrent? A: Yes, TUSB213RGYT provides built-in protection features such as overvoltage protection (OVP) and overcurrent protection (OCP) to safeguard connected devices.

  10. Q: Are there any evaluation tools available for TUSB213RGYT? A: Yes, Texas Instruments provides evaluation modules and software development kits (SDKs) to help developers evaluate and integrate TUSB213RGYT into their designs.

Please note that the answers provided here are general and may vary depending on the specific implementation and requirements of your technical solution. It is always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate and detailed information.