Texas Instruments
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
TUSB3410IRHBT
Näytä Yksityiskohdat DataSheets

TUSB3410IRHBT

Product Overview

Category

TUSB3410IRHBT belongs to the category of USB interface controllers.

Use

It is primarily used for USB-to-serial bridge applications.

Characteristics

  • Supports full-speed USB (12 Mbps) and UART data transfer rates up to 3 Mbps.
  • Provides a flexible serial interface with various control options.
  • Offers multiple power management features for low-power operation.
  • Includes built-in EEPROM for storing device configuration.

Package

TUSB3410IRHBT comes in a small-outline integrated circuit (SOIC) package.

Essence

The essence of TUSB3410IRHBT lies in its ability to bridge the gap between USB and serial communication, enabling seamless data transfer between the two interfaces.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage: 3.3 V
  • Operating Temperature Range: -40°C to +85°C
  • Data Rate: Up to 3 Mbps
  • Interface Type: USB 2.0
  • Package Type: SOIC-32

Detailed Pin Configuration

  1. VCCIO: Power supply for I/O pins
  2. GND: Ground reference
  3. D+/-: USB differential data lines
  4. RSTOUT: Reset output
  5. SUSPEND: Suspend input
  6. TXD: Transmit data
  7. RXD: Receive data
  8. RTS: Request to send
  9. CTS: Clear to send
  10. DSR: Data set ready
  11. DCD: Data carrier detect
  12. RI: Ring indicator
  13. VCC: Power supply
  14. TEST: Test mode select
  15. NC: No connection
  16. NC: No connection
  17. NC: No connection
  18. NC: No connection
  19. NC: No connection
  20. NC: No connection
  21. NC: No connection
  22. NC: No connection
  23. NC: No connection
  24. NC: No connection
  25. NC: No connection
  26. NC: No connection
  27. NC: No connection
  28. NC: No connection
  29. NC: No connection
  30. NC: No connection
  31. NC: No connection
  32. NC: No connection

Functional Features

  • USB-to-serial bridge functionality
  • Support for multiple control options
  • Power management features for low-power operation
  • Built-in EEPROM for device configuration storage
  • High-speed data transfer rates

Advantages and Disadvantages

Advantages

  • Seamless bridging between USB and serial interfaces
  • Flexible control options
  • Low-power operation capabilities
  • Compact package size
  • High-speed data transfer rates

Disadvantages

  • Limited pin configuration options
  • Requires external EEPROM for device configuration storage

Working Principles

TUSB3410IRHBT works by converting USB data packets into serial data and vice versa. It utilizes a built-in UART (Universal Asynchronous Receiver/Transmitter) to handle the serial communication. The device is designed to be compatible with USB 2.0 specifications, allowing it to achieve high-speed data transfer rates. It also incorporates power management features to optimize power consumption during operation.

Detailed Application Field Plans

TUSB3410IRHBT finds applications in various fields, including: 1. Industrial automation 2. Consumer electronics 3. Medical devices 4. Communication equipment 5. Automotive systems

Detailed and Complete Alternative Models

  1. CP2102N-A01-GQFN28: USB-to-UART bridge controller with similar functionality.
  2. FT232RL: USB-to-serial UART interface IC offering comparable features.
  3. PL2303HXD: USB-to-serial bridge controller with a different pin configuration but similar capabilities.

These alternative models can be considered based on specific requirements and compatibility with existing systems.

Word count: 550 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät TUSB3410IRHBT :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of TUSB3410IRHBT in technical solutions:

  1. Q: What is TUSB3410IRHBT? A: TUSB3410IRHBT is a USB-to-serial converter chip developed by Texas Instruments.

  2. Q: What are the key features of TUSB3410IRHBT? A: Some key features include USB 2.0 compliance, support for multiple serial interfaces, integrated USB transceiver, and built-in EEPROM.

  3. Q: How can TUSB3410IRHBT be used in technical solutions? A: TUSB3410IRHBT can be used to enable communication between a microcontroller or other serial device and a computer via USB.

  4. Q: What serial interfaces does TUSB3410IRHBT support? A: TUSB3410IRHBT supports UART, SPI, and I2C interfaces, making it versatile for various applications.

  5. Q: Does TUSB3410IRHBT require external components for operation? A: Yes, TUSB3410IRHBT requires external crystal oscillators, capacitors, and resistors for proper functionality.

  6. Q: Can TUSB3410IRHBT be used with both Windows and Mac operating systems? A: Yes, TUSB3410IRHBT is compatible with both Windows and Mac operating systems, as well as Linux.

  7. Q: What is the maximum data transfer rate supported by TUSB3410IRHBT? A: TUSB3410IRHBT supports data rates up to 3 Mbps, which is suitable for most serial communication applications.

  8. Q: Is TUSB3410IRHBT capable of hardware flow control? A: Yes, TUSB3410IRHBT supports hardware flow control using RTS/CTS signals.

  9. Q: Can TUSB3410IRHBT be used in low-power applications? A: Yes, TUSB3410IRHBT has a low-power mode that reduces power consumption when not actively transmitting or receiving data.

  10. Q: Are there any development tools or software libraries available for TUSB3410IRHBT? A: Yes, Texas Instruments provides development tools and software libraries to assist with the integration of TUSB3410IRHBT into technical solutions.

Please note that these answers are general and may vary depending on specific implementation requirements.