XC6108C35DGR-G
Product Overview
Category
XC6108C35DGR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize voltage levels.
Characteristics
- Voltage regulation capability
- Compact size
- Low power consumption
- High efficiency
Package
XC6108C35DGR-G is available in a small surface-mount package.
Essence
The essence of XC6108C35DGR-G lies in its ability to provide stable voltage output for various electronic devices.
Packaging/Quantity
The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.3V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 25μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6108C35DGR-G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage Regulation: The XC6108C35DGR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent Protection: It incorporates overcurrent protection to safeguard connected devices.
- Thermal Shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.
- Low Power Consumption: The device consumes minimal power during operation.
Advantages and Disadvantages
Advantages
- Small form factor allows for easy integration into compact designs.
- Efficient voltage regulation ensures reliable performance of connected devices.
- Overcurrent protection enhances system safety.
- Wide operating temperature range enables usage in various environments.
Disadvantages
- Limited output current may not be suitable for high-power applications.
- Dropout voltage may cause a slight voltage drop across the regulator.
Working Principles
XC6108C35DGR-G operates based on the principle of linear voltage regulation. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output voltage.
Detailed Application Field Plans
XC6108C35DGR-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable technology - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6108C35DGR-G are: - LM1117-3.3 - MCP1700-3302E/TO - TS2937CP-3.3
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
Word count: 345 words
Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XC6108C35DGR-G :n soveltamiseen teknisissä ratkaisuissa
Sure! Here are 10 common questions and answers related to the application of XC6108C35DGR-G in technical solutions:
Q: What is XC6108C35DGR-G? A: XC6108C35DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6108C35DGR-G? A: The operating voltage range of XC6108C35DGR-G is typically between 0.9V and 6.0V.
Q: How does XC6108C35DGR-G help in technical solutions? A: XC6108C35DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level.
Q: Can XC6108C35DGR-G be used in battery-powered applications? A: Yes, XC6108C35DGR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.
Q: What is the typical reset threshold voltage of XC6108C35DGR-G? A: The typical reset threshold voltage of XC6108C35DGR-G is 3.5V.
Q: Does XC6108C35DGR-G have an adjustable reset threshold voltage? A: No, XC6108C35DGR-G does not have an adjustable reset threshold voltage. It has a fixed threshold voltage of 3.5V.
Q: Is XC6108C35DGR-G compatible with both CMOS and TTL logic levels? A: Yes, XC6108C35DGR-G is compatible with both CMOS and TTL logic levels, making it versatile for various digital applications.
Q: Can XC6108C35DGR-G be used in automotive applications? A: Yes, XC6108C35DGR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q: Does XC6108C35DGR-G have built-in hysteresis? A: Yes, XC6108C35DGR-G has built-in hysteresis to prevent oscillation caused by noise or voltage fluctuations near the threshold voltage.
Q: What package does XC6108C35DGR-G come in? A: XC6108C35DGR-G comes in a small SOT-25 package, which is compact and suitable for space-constrained designs.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of XC6108C35DGR-G.