Torex Semiconductor Ltd
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
XC6108N40AGR-G
Näytä Yksityiskohdat DataSheets

XC6108N40AGR-G

Product Overview

Category

XC6108N40AGR-G belongs to the category of voltage regulators.

Use

It is primarily used for voltage regulation in electronic circuits.

Characteristics

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 4.0V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Package

XC6108N40AGR-G is available in a small SOT-25 package.

Essence

The essence of XC6108N40AGR-G lies in its ability to regulate voltage efficiently and reliably in various electronic applications.

Packaging/Quantity

It is typically packaged in reels, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 4.0V ±2%
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Line Regulation: ±0.3% (typical)
  • Load Regulation: ±0.3% (typical)
  • Ripple Rejection Ratio: 60dB (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108N40AGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage ensures efficient voltage regulation even with low input voltages.
  • Low quiescent current minimizes power consumption.
  • Excellent line and load regulation provide stable output voltage.
  • High ripple rejection ratio reduces noise interference.

Advantages

  • Wide input voltage range allows for versatile applications.
  • Small package size enables space-saving designs.
  • Low dropout voltage ensures efficient power utilization.
  • Low quiescent current prolongs battery life in portable devices.
  • Excellent line and load regulation provide stable performance.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • SOT-25 package may require additional thermal considerations for heat dissipation.

Working Principles

XC6108N40AGR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a constant output voltage.

Detailed Application Field Plans

XC6108N40AGR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable audio players - Mobile phones - Digital cameras - Wearable devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108N40AGR-G are: - XC6201P332MR-G - XC6210B332MR-G - XC6220B332MR-G - XC6230B332MR-G - XC6240B332MR-G

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 410 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XC6108N40AGR-G :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of XC6108N40AGR-G in technical solutions:

  1. Question: What is XC6108N40AGR-G?
    Answer: XC6108N40AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6108N40AGR-G?
    Answer: The operating voltage range of XC6108N40AGR-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6108N40AGR-G help in technical solutions?
    Answer: XC6108N40AGR-G ensures proper functioning of electronic devices by monitoring the power supply voltage and generating a reset signal to prevent erratic behavior or data corruption during power fluctuations.

  4. Question: Can XC6108N40AGR-G be used in battery-powered applications?
    Answer: Yes, XC6108N40AGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  5. Question: What is the reset voltage threshold of XC6108N40AGR-G?
    Answer: The reset voltage threshold of XC6108N40AGR-G is typically 4.0V.

  6. Question: Does XC6108N40AGR-G have any built-in delay time for the reset signal?
    Answer: Yes, XC6108N40AGR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.

  7. Question: Is XC6108N40AGR-G suitable for automotive applications?
    Answer: Yes, XC6108N40AGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Question: Can XC6108N40AGR-G be used in industrial control systems?
    Answer: Yes, XC6108N40AGR-G can be used in industrial control systems to ensure reliable operation and prevent data loss during power supply fluctuations.

  9. Question: Does XC6108N40AGR-G have any built-in protection features?
    Answer: Yes, XC6108N40AGR-G has built-in overcurrent protection and thermal shutdown features to protect the IC from damage.

  10. Question: What package options are available for XC6108N40AGR-G?
    Answer: XC6108N40AGR-G is available in a small SOT-25 package, which is suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of XC6108N40AGR-G.